1-888-485-0777
Today's Hours 10am - 6pm est
Â
AHRI Number:207825543
The ACiQ Platinum series features Max Heat technology that enables continuous heating all the way down to -22 degrees outside. With high SEER2 and high HSPF, you get maximum efficiency whether you are cooling or heating your space.
The ACIQ-18ZPL-HP230B Condenser, when matched with the ACIQ-18ZPL-HP230B wall mounted air handler, has enough capacity for small to medium rooms. The dual rotary compressor and variable inverter technology give this system exceptionally high efficiency ratings.
Please note that this model of equipment does not have quick connect line set connectors and is not a DIY unit. Installation materials such as line sets, control wire, drain hose, whip and disconnect are not included, but are available at additional cost in the Accessories section on this page. You will need a professional to add more refrigerant and vacuum the lines as needed. The automated cleaning function will clean your system, but it is recommended to periodically clean the unit's filters manually.
When space for a standard high wall unit is not available, ACiQ Floor Mounted air handlers are the ideal solution. Also known as heat console type air handlers, these units surface mount low on the wall or on the floor, making them perfect for sun porches or attic rooms with limited wall space. They are wider, taller, and slightly shallower than high wall units, and are optimized for heating.
ACiQ Floor Mounted air handlers are designed to take in return air at the top edge and deliver it at the bottom, making them ideal for heating. By delivering warm air at floor level, stratification due to heat rise is eliminated. When the unit is put into cooling mode, the airflow direction is reversed to improve air mixing in the room.
Note: The 18k and 24k models may have a slightly different appearance from the 12k model, and can be surface mounted on the floor or ceiling. Please refer to the appropriate manual for your specific model.
Upgrade your HVAC system with the efficient and space-saving ACiQ Floor Mounted air handlers. Perfect for sun porches and attic rooms, these units provide optimal heating and cooling while taking up minimal wall space. Contact us today to learn more about the ACiQ Floor Mounted air handlers and installation options.
Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 1/2 inch O.D. flared ends, length 15 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.
Features:
Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 1/2 inch O.D. flared ends, length 25 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.
Features:
Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 1/2 inch O.D. flared ends, length 30 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.
Features:
Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 1/2 inch O.D. flared ends, length 35 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.
Features:
Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 1/2 inch O.D. flared ends, length 50 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.
Features:
E Liteis a plastic pad designed as a mounting base for air conditioning condensers. The rugged design provides uniform and generous ribbing for optimum, self-leveling ground support without inserts. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but not too light. A subtle texture prevents unit slide and presents a classic appearance, which is enhanced by rounded edges and a concrete gray color. Each pad is molded with its size in raised letters.
This wall mount bracket is perfect for outdoor mini split condensers. The length of the the wall bracket arms are 23" long. The condensing unit is mounted onto the L-shaped brackets and fastened using the bolts and anti-vibration washers provided.
Features:E Lite Condenser Pad is designed to provide solid support for air conditioning condensers. It's made from sturdy polypropylene, striking a balance between lightness and stability. Its robust design ensures a level ground without the need for extra components.
E Lite Risers complement the Condenser Pad, allowing you to adjust your setup as needed. They are constructed from weather-resistant PVC for outdoor use.
E Lite Condenser Pad and Risers offer reliable support without any complications. They are built to last and deliver efficient performance. Consider E Lite for your support needs – it's a practical solution for your projects.
This ductless mini-split installation kit for condensers includes a whip, surge protector, disconnect safety switch, telescoping wall sleeve, and charging adapter. This installation kit has all of the accessories that you will need to have your mini split condenser professionally installed.
Includes:
18,000 BTU ACiQ Platinum series Single Zone Condenser w/ Extreme Heat | |
---|---|
SKU | ACIQ-18ZPL-HP230B |
Weight | 108.030000 |
AHRI Certificate Number | 210857317 |
Manufacturer | ACiQ |
HSPF | 8.3 |
HSPF2 | 11.3 |
Cooling BTU | 18,000 BTU |
Heating BTU | 18,000 BTU |
Decibel Level (dBA) | 59 |
Electric Heat | Heat Pump |
Energy Star | Yes |
Refrigerant | R410A |
SEER | 20 |
SEER2 | 20 |
EER | 12.5 |
Electrical | 208/230V | 1 Phase | 60 Hz |
Max Breaker Size | 25 |
Min. Breaker Size | 20 |
Tonnage | 1.5 Ton |
BTU/Tonnage | 18,000 BTU/1.5 Ton |
Min/Max Outdoor Temp for Heating | -22~75 F / -30~24 C |
Min/Max Outdoor Temp for Cooling | -22~122 F / -30~50 C |
Zone Compatibility | Single Zone |
Certification | Energy Star, NEEP, UL AHRI |
Height | 26.5" |
Width | 35.04" |
Depth | 13.46" |
Warranty | 12 year compressor, 7 year parts with online registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
18,000 BTU Floor Mounted ACiQ Mini-Split Air Handler | |
SKU | ACIQ-18FM-HH-MB |
Weight | 68.340000 |
Manufacturer | ACiQ |
Controller | Wireless Included |
Cooling BTU | 18,000 BTU |
Heating BTU | 18,000 BTU |
Maximum CFM | 548 |
Decibel Level (dBA) | As low as 39 |
Energy Star | Yes |
Refrigerant | R410A |
Liquid Line | 1/4" |
Suction Line | 1/2" |
Electrical | 208/230V 1 Phase 60Hz |
Phase | Single Phase |
Max Breaker Size | 25 |
Min. Breaker Size | 20 |
BTU/Tonnage | 18,000 BTU/1.5 Ton |
Mini-Split Type | Low Wall/Ceiling |
Zone Compatibility | Multi Zone |
Height | 9.25" |
Width | 42.05" |
Depth | 26.57" |
Warranty | 12 year compressor, 7 year parts with online registration |
Resources | |
Safety Information | PROPOSITION 65 WARNING |
Refrigerant Line Set with 1/4" and 1/2" Line Ends - 15 feet | |
SKU | 201814 |
Weight | 45.000000 |
Manufacturer | Online Supply |
Length | 15' |
Height | 1/2" |
Width | 1/2" |
Safety Information | PROPOSITION 65 WARNING |
Refrigerant Line Set with 1/4" and 1/2" Line Ends - 25 feet | |
SKU | 366400 |
Weight | 45.000000 |
Manufacturer | Online Supply |
Length | 25' |
Height | 1/2" |
Width | 1/2" |
Safety Information | PROPOSITION 65 WARNING |
Refrigerant Line Set with 1/4" and 1/2" Line Ends - 30 feet | |
SKU | 216741 |
Weight | 45.000000 |
Manufacturer | Online Supply |
Length | 30' |
Height | 1/2" |
Width | 1/2" |
Safety Information | PROPOSITION 65 WARNING |
Refrigerant Line Set with 1/4" and 1/2" Line Ends - 35 feet | |
SKU | 366401 |
Weight | 45.000000 |
Manufacturer | Online Supply |
Length | 15' |
Height | 1/2" |
Width | 1/2" |
Safety Information | PROPOSITION 65 WARNING |
Refrigerant Line Set with 1/4" and 1/2" Line Ends - 50 feet | |
SKU | 366402 |
Weight | 45.000000 |
Manufacturer | Online Supply |
Length | 50' |
Height | 1/2" |
Width | 1/2" |
Safety Information | PROPOSITION 65 WARNING |
Diversitech E Lite Equipment Pad 18" x 38" x 3" | |
SKU | EL1838-3 |
Weight | 16.000000 |
Manufacturer | Online Supply |
Height | 3" |
Width | 18" |
Depth | 38" |
Safety Information | PROPOSITION 65 WARNING |
Wall Mount Bracket for Mini Split Systems | |
SKU | HW-600 |
Weight | 9.200000 |
Manufacturer | Online Supply |
Length | 23" |
Height | 20" |
Width | 6" |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
Diversitech E Lite Equipment Pad and Risers Kit 18" x 38" x 3" | |
SKU | 87762 / EL1838-3 |
Weight | 25.000000 |
Manufacturer | Online Supply |
Height | 3" |
Width | 18" |
Depth | 38" |
Safety Information | PROPOSITION 65 WARNING |
Ductless Mini Split Installation Kit for Condensers | |
SKU | MSK001 |
Weight | 15.000000 |
Manufacturer | Online Supply |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |