18,000 BTU ACIQ Extreme 25 SEER2 Tri Zone Wall Mount Mini Split Heat Pump System - R454B | 230V - 6 + 9 + 9

ACiQ-18Z-HH-M2B: The Affordable Smart Solution to Adaptive Heating and Cooling

Are you looking for an affordable and intelligent solution to heating and cooling your home? Look no further than ACiQ-18Z-HH-M2B. This multi zone heat pump condenser is designed to provide efficient and adaptive heating and cooling in almost any space and climate, all at an affordable cost. Here are some quick facts about this system:

Quick Facts:

• 18,000 BTU, 21.5 SEER multi zone heat pump condenser
• Can function with up to 2 attached air handlers
• Efficient cooling from -22 F to 122 F outdoor temperatures
• Efficient heating from -22 F to 57 F outdoor temperatures
• Integrated Max Heat technology with base pan heater
• Gold Fin full-protection coating on condenser coil
• Quiet operation even at the highest workloads

18,000 BTU, 21.5 SEER

The ACiQ-18Z-HH-M2B is an adaptive, inverter condenser that can support up to 2 air handlers at up to 1.25 times the condenser BTU rating, or 22,500 BTU across all air handlers. This system is designed to constantly self-adjust to provide the precise amount of heating or cooling needed to maintain your desired temperature in each room or zone. You can even set different temperatures for each room or turn off heating and cooling in unused areas. With a high efficiency rating of 21.5 SEER, you can save money both upfront and over the lifetime of the unit.

It's important to note that although the condenser is pre-charged, this equipment model does not have quick connect line set connectors and is not a self-install unit. You will need a professional to add more refrigerant and vacuum the lines as needed. Installation materials such as line sets, control wire, drain hose, whip and disconnect are not included, but are available at additional cost in the Accessories section. Keep in mind that a minimum of two air handlers is needed for the unit to function.

Upgrade your home's heating and cooling system with the affordable and intelligent ACiQ-18Z-HH-M2B.

The ACiQ Platinum air handler is a high-performance heating and cooling system that is designed to provide efficient, adaptive temperature control for small to medium sized rooms. It can be used with any ACiQ Multizone condenser or the Platinum Single Zone condenser to create a highly efficient, Hyper Heat system that can help you save money on your energy bills.

Features

• 9,000 BTU wall mounted air handler with included remote control
• WiFi capable using free Net Home Plus app, Google Home, or Alexa
• Easier maintenance and installation
• Multizone compatible, heat or cool multiple rooms on one outdoor unit
• Enhanced Dry mode, intelligent sleep mode, power save mode

Intelligent Heating and Cooling

The ACiQ-09W-HH-MB air handler includes a soft LED display on the front of the unit, which shows room temperature by default but can also display temperature setpoint changes and mode changes. The self-diagnosing control board will also show any error codes to ensure the unit runs properly throughout its lifetime. The display can be switched off if desired, and the smart remote control has a built-in LCD display to show these notifications as well.

WiFi Options

The ACiQ air handler is WiFi ready, allowing you to control your home's heating and cooling via a smart device (iOS or Android) from anywhere in the world. It is also compatible with Amazon Alexa and Google Assistant.

Installation Requirements

Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, which may be available at an additional cost if not already included in this product bundle.

Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends, length 15 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends, length 35 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends, length 50 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends, length 25 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends, length 30 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends