ACiQ 2.5 Ton 15.2 SEER High Efficiency Central Air Conditioner Condenser - R410A Inverter

ACiQ 2.5 Ton 15.2 SEER High Efficiency Central Air Conditioner Condenser - R410A Inverter
By

ACiQ

Out of stock
Model

ACIQ-30-AC

ID

167139

Replace Your AC Without Replacing Your Whole System

This ACiQ R410A inverter air conditioner condenser is a smart choice for homeowners who need a compatible replacement for an existing R410A central cooling setup. If your indoor coil and furnace are still usable and properly matched, replacing the outdoor condenser can help restore cooling without requiring a full HVAC system replacement. It is a cooling-only condenser and may fit homes with compatible furnace and evaporator coil setups.

Key Benefits

  • R410A Compatible Replacement – A smart option for replacing the outdoor condenser in an existing compatible R410A cooling system.
  • Limited Availability Option – A good choice while R410A replacement equipment is still available.
  • Sized for Small to Medium Homes – 2.5 ton cooling capacity for approximately 1,300–1,600 sq. ft. homes.
  • 15.2 SEER Cooling Efficiency – Provides dependable cooling performance for compatible central air installations.
  • Inverter Cooling Performance – Variable-output 2.5 ton (30,000 BTU) inverter performance; can go down to 1 Ton (12,000 BTU) based on demand and weather conditions.

Cooling Capacity for Small to Medium Homes

With 2.5 tons of cooling capacity, this condenser is commonly used for homes approximately 1,300–1,600 sq. ft. in various climates. Actual sizing depends on your local climate, insulation, windows, ceiling height, air leakage, home layout, and a professional sizing review.

Good Replacement Option for R410A Systems

This condenser is a practical choice when your existing indoor coil or evaporator coil is still compatible with R410A equipment. For many homeowners, replacing the outdoor condenser can extend the life of their current setup and avoid the added cost of converting the entire system to newer refrigerant equipment.

Limited R410A Availability

R410A condensers are becoming more limited as new equipment transitions to updated refrigerants. If your system requires an R410A-compatible replacement, this unit can help keep your existing setup operational while inventory is still available.

Warranty

This condenser includes a 12-Year Compressor Warranty and 7-Year Parts Warranty with online registration. Installation must follow state and local codes, and warranty coverage may be void if the unit is not installed by a qualified professional.

What’s Included

  • ACiQ Inverter Air Conditioner Condenser – Outdoor cooling-only condenser for compatible R410A split-system applications.

Recommended Accessories

  • Line Set – Connects the outdoor condenser to compatible indoor equipment for refrigerant flow.
  • Condenser Installation Kit – Provides key installation materials for a cleaner condenser setup.
  • Mounting Options – Choose the mounting option that fits the installation location.
  • Thermostat – Select a compatible thermostat option to support system control.

Requirements & Considerations

  • Compatible Indoor Equipment Required – This cooling-only condenser must be paired with compatible R410A indoor equipment.
  • Line Set Selection – Use the line set option and connection sizing shown on the live product page or confirmed by installation guidance.
  • Refrigerant Charge – Pre-charged with R410A refrigerant for up to 25' of line set.
  • Electrical Requirements – Requires a 208 / 230 V, 1 Phase, 60 Hz electrical supply. Requires a 40 Amp max breaker and 24 Amp minimum breaker size.
  • Professional Installation Recommended – Proper installation, system matching, and refrigerant handling are important for safe operation and warranty coverage.
More Information
ACiQ 2.5 Ton 15.2 SEER High Efficiency Central Air Conditioner Condenser - R410A Inverter
FeatureSpec
SKUACIQ-30-AC
Refrigerant Charge25'
Weight (in lbs)157.85
Brand/ManufacturerACiQ
UPC850038750879
Cooling BTU30000 BTU
Maximum CFM3000
Decibel Level (dBA)62.5
RefrigerantR410A
SEER1 (Efficiency)15
EER11.5
Condenser StagesVariable Speed
Compressor TypeRotary
Liquid Line3/8"
Suction Line3/4"
Electrical208/230V 1 Phase 60 Hz
Max Breaker Size30 Amps
Min. Breaker Size25 Amps
Tonnage2.5 Ton
Min/Max Outdoor Temp for Heating5~75
Min/Max Outdoor Temp for Cooling 5~122
Zone CompatibilitySingle Zone
Operating ModeCooling
Height31.89"
Width37.24"
Depth16.14"
Warranty12 year compressor, 7 year parts with online registration
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Write Your Own Review
You're reviewing:ACiQ 2.5 Ton 15.2 SEER High Efficiency Central Air Conditioner Condenser - R410A Inverter
Your Rating
Customer Questions
What happens if this breaks down?
HVACDirect.com gives you lifetime tech support. Many common problems can be solved with a phone call to us. HVACDirect.com is an authorized dealer of ACiQ, therefore equipment we sell carries the full manufacturer's warranty. The warranty applies to all parts. You have to register the products online in order to extend the warranty to the full 10 years, otherwise the term is 5 years. If a part fails under warranty, you will not pay anything for the replacement part. Should a part fail under warranty, the first step is to have a professional confirm what part needs to be replaced. Then, contact us at [email protected] or by calling and asking for customer service.
What happens if it arrives damaged?
If you are present during drop-off and you see obvious signs of damage or rough handling in transit - please ask the driver to wait while you inspect the equipment. If it is damaged badly enough that you believe it can not function, you have the right to refuse the damaged portion of the shipment. If you discover the damage after the driver has left, take photos of the damage and send them to [email protected]. Please refer to your order number in the email. This starts the process and one of our representatives will be in touch with you promptly.
How can I find an installer?
It’s easier than you think – the key is to find an independent contractor or small company as opposed to a larger HVAC service. A one or two person outfit will do the work more quickly and cheaply than a bigger company, too. Yelp.com, Thumbtack.com, and Porch.com are websites are designed to help you connect with a professional in your area. You could also place a call to the last professional who did work on your home and see if they have any recommendations.
Should I order a new lineset?
Our top recommendation – protect your investment by replacing your lineset when you replace your air conditioning. Leftover oil and or contaminants in the old lineset can enter your new system and reduce the lifespan. If, on the other hand, you wish to avoid replacing the lineset, we do carry flush kits to clean out incompatible oils and contaminants.
I'm setting this unit up for cooling only with 24v wiring and I was unsure about one of the dip switch settings. Should S1-3 be on or off?
For the ACiQ ACIQ-30-AC air handler configured for cooling-only with 24V controls, the S1-3 dip switch should be set to OFF, as this setting is typically used to disable heating-related control logic and ensure the board operates strictly in cooling mode with a conventional thermostat. If you have any further questions, please call us and we will be happy to assist you.
Who makes ACiQ?
ACiQ is made by one of the largest HVAC manufacturers in the world. With 150,000 employees in over 195 countries, their products improve the lives of millions of people around the globe. Their manufacturing is state of the art, with robotic assembly and computer-assisted quality control. ACiQ has an extremely low rate of warranty return. With its combination of advanced features, strong performance, and competitive pricing, ACiQ delivers some of the best value available in HVAC today.
Did you find what you were looking for?