1-888-485-0777
Today's Hours 10am - 6pm est
AHRI Number:9895103
Save up to 70% off Local HVAC Prices
Upgrade your ACiQ air handlers with this high-performance 208/230 volt heater coil to enhance your winter-time heating capabilities. With an impressive heat output of 34,000 BTUs, this heater coil ensures efficient and reliable heating for your home. The package includes circuit breakers for added convenience and safety.
With its communicating nature and variable speed compressor, the ACiQ HVH836GKA lives up to its name, providing one of the most superior comforts to your home on the market today. If you want the best of the best possible heat pump condenser with exceptional comfort and the highest possible efficiency offered by ACiQ at this size, this is it.
The ACiQ HVH836GKA heat pump condenser has an output of 3 tons, generally enough to heat and cool up to a medium-sized house in ideal climates. In many system configurations, the tonnage of the unit's paired coil or air handler will be larger in tonnage than this condenser, which maintains the efficiency of the unit.Please note that this condenser cannot function on its own, and it needs an indoor coil or air handler to work. This unit will also only heat down to around 35°F, and if you need heat any lower than this, a backup heat strip will be needed to act as straight electric heating in a compatible air handler.
The ACiQ HVH836GKA air conditioner condenser is rated at 19 SEER, making it approximately 25% more efficient than the minimum efficiency 14 SEER units, saving you money in electric bills over the entire lifetime of your unit. With its 19 SEER rating, this condenser is one of the most efficient units on the market today. In general, heat pumps will heat more efficiently than straight electric furnaces, making them an excellent and money-saving solution for almost any all-electric solution, especially when you have a lot of heating during outdoor temperatures ranging from when you start using your heating system all the way down to 35°F.
ACiQ offers a 10 year parts warranty on its condensers, and on this unit there is also a 10 year no hassle replacement limited warranty. For these warranties to be upheld, the unit must be installed following your state and local codes, a new and certified coil must be installed at the same time, and the entire system must be registered online through the manufacturer.
Engineered to be 2 stage and with the ability to communicate with communicating air handler counterparts, the ACiQ HVH836GKA can support the most precise temperature output available, providing primarily enhanced comfort to your home year-round. Moreover, this unit is a communicating system when paired with a compatible air handler and other accessories (both available at an additional cost), allowing it to relay information to and from the thermostat constantly for optimal performance. On top of these benefits, these system features provide a small efficiency boost, all amounting to one of the best types of systems on the market today.
Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.
The ACiQ FCM4X4800AL is a part of ACiQ's top-of-the-line series, offering superior comfort, efficiency, and features. With its variable speed communicating blower motor and integrated TXV kit, this unit ensures reliable comfort while operating efficiently.
The ACiQ FCM4X4800AL air handler is rated for a 4-ton output. In many cases, the air handler may have a larger tonnage than the paired condenser to maintain overall unit efficiency.Note: To provide cooling, this unit requires an outdoor condenser. It can support electric heating as a straight electric furnace or as a backup for a heat pump, which comes at an additional cost for field installation.
ACiQ provides a 10-year no-hassle replacement warranty and a 10-year parts warranty for this unit. To ensure the warranties are valid, proper installation following state and local codes is necessary. Additionally, a new and certified coil must be installed simultaneously, and the entire system must be registered online through the manufacturer. After your purchase, our representative will contact you to gather installation information for registration.
The ACiQ FCM4X4800AL air handler is designed for easy installation in upflow, downflow, or horizontal positions, making it a versatile unit. It comes with a pre-installed TXV kit, reducing installation costs. The unit features a strong, one-piece outer casing for durability, and the coil is made of corrosion-resistant aluminum. The treated and sloped drain pan helps prevent mold and bacteria buildup.
The FCM4X4800AL air handler is equipped with an ECM variable speed blower motor, enhancing both efficiency and comfort by providing stable temperature control. The control board automatically communicates with your thermostat to adjust the blower output according to your needs. With its intelligent comfort and exceptional efficiency, the FCM4X4800AL meets ACiQ's superior standards.
Enhance the winter-time heating capabilities of your ACiQ air handlers with this high-performance 208/230 volt heater coil. Designed to provide reliable and efficient heating, this heater coil produces an impressive 17,000 BTUs of heat.
Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.
Upgrade your ACiQ air handlers with this powerful 208/230 volt heater coil to enhance your winter-time heating capabilities. With an impressive heat output of 23,800 BTUs, this heater coil ensures efficient and reliable heating performance.
Don't settle for a mere thermostat when you can have the advanced features and functionality of the Ionâ„¢ System Control. This fully-featured control gives you complete command over your communicating comfort system, offering control over temperature, humidity, ventilation, comfort scheduling, energy management, and more. Experience the ultimate convenience of full system control from anywhere in the world using your internet-enabled device.
10 Kilowatt 34,000 BTU ACiQ Heater Coil | |
---|---|
SKU | EHK10AKB |
Weight (in lbs) | 9.000000 |
Brand/Manufacturer | ACiQ |
Equivalent | Carrier Equivalent: KFCEH2601C10 Tempstar Equivalent: EHK10AKB Bryant Equivalent: KFCEH2601C10 |
Heating BTU | 34,000 |
Electric Heat | 10 Kilowatts |
Electrical | 208 / 230 / 240 Volts / 1 Phase |
Phase | Single Phase |
Min. Breaker Size | 60 Amps |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
3 Ton 18 SEER Variable Speed ACiQ Heat Pump | |
SKU | HVH836GKA |
Weight (in lbs) | 156.000000 |
Brand/Manufacturer | ACiQ |
Equivalent | Carrier Equivalent: 25VNA836A003 Tempstar Equivalent: TVH836GKA Bryant Equivalent: 288BNV036000 |
Cooling BTU | 36,000 |
Heating BTU | 36,000 |
Maximum CFM | 2500 |
Decibel Level (dBA) | 71 |
Motor RPM | 1050 |
Horsepower | .333 HP |
Energy Star | Yes |
Refrigerant | R410A |
SEER1 (Efficiency) | 18 |
Condenser Stages | Variable Speed |
Compressor Type | Scroll |
Liquid Valve Size | 3/8" |
Suction Valve Size | 3/4" |
Electrical | 208 / 230 V. 1 Phase 60 Hz |
Phase | Single Phase |
Max Breaker Size | 40 Amps |
Min. Breaker Size | 24.4 Amps |
Tonnage | 3 Ton |
Height | 38 1/2" |
Width | 23" |
Depth | 23" |
Warranty | 10 Years No Hassle Replacement Warranty with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents |
Safety Information | PROPOSITION 65 WARNING |
30 Feet of 3/8" LL x 7/8" SL x 3/8" Insulated Line Set | |
SKU | LS38783830 |
Weight (in lbs) | 30.000000 |
Brand/Manufacturer | Online Supply |
Liquid Line | 3/8" |
Suction Line | 7/8" |
Suction Line Insulation Thickness | 3/8" |
Length | 30 feet |
Safety Information | PROPOSITION 65 WARNING |
4 Ton Multi-Positional ACiQ Communicating Air Handler | |
SKU | FCM4X4800AL |
Weight (in lbs) | 172.000000 |
Brand/Manufacturer | ACiQ |
Equivalent | Carrier Equivalent: FE4ANF005L00 Tempstar Equivalent: FCM4X4800AL Bryant Equivalent: FE4ANF005L00 |
Communicating | Yes |
Blower Motor | Variable Speed |
Maximum CFM | 1600 |
Motor RPM | 300-1300 |
Horsepower | .5 HP |
Horsepower | .5 HP |
Electric Backup Heat Capabilities (Optional) | 5 Kilowatts, 8 Kilowatts, 10 Kilowatts, 15 Kilowatts, 20 Kilowatts, 25 Kilowatts, 30 Kilowatts |
Refrigerant | R410A |
Filter Size | 19 7/8" x 21 1/2" |
EER | 9.5-13 |
Liquid Line | 3/8" |
Suction Line | 7/8" |
Electrical | 208/230v 1 Phase 60 Hz |
Phase | Single Phase |
Max Breaker Size | 15 Amps |
Tonnage | 4 Ton |
Connection | Sweat |
Certification | UL Listed |
Height | 53 7/16" |
Width | 21 1/8" |
Depth | 22 1/16" |
Warranty | 10 Year No Hassle Replacement and 10 Year Parts with Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
5 Kilowatt 17,000 BTU ACiQ Heater Coil | |
SKU | EHK05AKB |
Weight (in lbs) | 9.000000 |
Brand/Manufacturer | ACiQ |
Equivalent | Carrier Equivalent: KFCEH2401C05 Tempstar Equivalent: EHK05AKB Bryant Equivalent: KFCEH2401C05 |
Heating BTU | 17,000 |
Electric Heat | 5 Kilowatts |
Electrical | 208 / 230 / 240 Volts / Phase 1 |
Phase | Single Phase |
Min. Breaker Size | 30 Amps |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
50 Feet of 3/8" LL x 7/8" SL x 3/8" Insulated Line Set | |
SKU | LS38783850 |
Weight (in lbs) | 30.000000 |
Brand/Manufacturer | Online Supply |
Liquid Line | 3/8" |
Suction Line | 7/8" |
Suction Line Insulation Thickness | 3/4" |
Length | 50 feet |
Safety Information | PROPOSITION 65 WARNING |
7 Kilowatt 23,800 BTU ACiQ Heater Coil | |
SKU | EHK07AKB |
Weight (in lbs) | 9.000000 |
Brand/Manufacturer | ACiQ |
Equivalent | Carrier Equivalent: KFCEH2501C08 Tempstar Equivalent: EHK07AKB Bryant Equivalent: KFCEH2501C08 |
Heating BTU | 23,800 |
Electric Heat | 7 Kilowatts |
Electrical | 208 / 230 / 240 Volts / Phase 1 |
Phase | Single Phase |
Min. Breaker Size | 45 Amps |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
Ion System Control | |
SKU | SYST0101CW |
Weight (in lbs) | 1.000000 |
Brand/Manufacturer | ACiQ |
Warranty | 10 Years No Hassle Replacement / 10 Years Parts with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |