36,000 BTU ACIQ Standard 20 SEER2 Tri Zone Concealed Duct Mini Split Heat Pump System - R454B | 230V - 9 + 9 + 24

Introducing ACiQ's ES-36Z-M4B Multi-Zone Heat Pump Condenser

ACiQ offers a smart solution to adaptive heating and cooling for almost any space and climate, all at an affordable cost. The ES-36Z-M4B is a multi-zone heat pump condenser that can run up to 4 air handlers off a single condenser, saving space outside while keeping your home perfectly comfortable. Here are some quick facts about this impressive unit:

Quick Facts:

• 36,000 BTU, 23.9 SEER2 multi-zone heat pump condenser
• Designed to function with up to 4 attached air handlers
• Efficient cooling from 5°F to 122°F outdoor temperatures
• Efficient heating from -13°F to 75°F outdoor temperatures
• Integrated Max Heat technology with base pan heater
• Gold Fin full-protection coating on condenser coil
• Quiet operation at even the highest workloads

36,000 BTU, 23.9 SEER2

The ES-36Z-M4B is a versatile unit that can easily support up to 4 air handlers with up to 1.25 times the condenser BTU rating, or 45,000 BTU across all air handlers. This adaptive, inverter condenser constantly self-adjusts to provide the precise amount of heating or cooling needed to maintain your desired temperature in each room or zone. With the ability to set different temperatures in each room, you can even turn off heating and cooling in unused areas. The high efficiency rating of 23.9 SEER2 means you are buying a system designed to intelligently save you money both upfront and over the lifetime of the unit.

Please note that although the condenser is pre-charged, this unit does not have quick-connect line set connectors and is not a self-install unit. You will need a professional to add more refrigerant and vacuum the lines as needed. Installation materials such as line sets, control wire, drain hose, whip, and disconnect are not included but are available at an additional cost in the Accessories section to the right of this text. For all multi-zone ACiQ condensers, a minimum of two air handlers is needed for the unit to function.

Benefits of Concealed Duct Air Handlers for Your Home

Concealed duct air handlers offer a discreet and efficient way to cool or heat your home without visible air handlers on your walls or ceilings. These flexible units are designed to be concealed above the ceiling, below the floor, above a closet ceiling, above a hallway ceiling, or behind a soffit. Here are some of the benefits of concealed duct air handlers:

1. Versatility

Concealed duct air handlers can be installed in various locations, giving you more flexibility with your home's design. They are perfect for small bedrooms or a master suite, as up to 4 flex duct runs can be connected, depending on the unit's capacity.

2. Simple Design

Concealed duct air handlers have a simple design that consists of a rear return air inlet and a front supply air outlet. The almost-silent squirrel cage fan pushes the cooled or heated air out of the unit, making it a quiet and efficient option for your home.

3. Customizable

The concealed duct system allows for a high level of customization, as you can field-fabricate plenums using ductboard or attach a pre-made manifold takeoff. This flexibility allows you to create a unique solution for your home's specific needs.

4. Suitable for New Construction or Additions

Concealed duct air handlers are best used in new construction projects or additions, as the installation requires pre-planning and is similar in scope to a standard home HVAC installation. However, the benefits of a concealed duct system are worth the effort.

5. Features

• 9,000 BTU of heating or cooling
• Dry and fan modes also available (MACIQ-12FM-HH-MB)
• Good for a smaller room in most climates
• Wall-mounted thermostat included

Installation Considerations

Concealed duct system installations require additional supplies such as flex ducting, register vents, plenums, and installation supplies, in addition to the equipment components. The concealed duct units have a factory-installed pump to lift the condensation. From there, you will need to use PVC to construct a drain system to a safe wastewater location.

Overall, concealed duct air handlers provide a discreet and customizable option for heating and cooling your home, with minimal impact on your home's design and aesthetic.

Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends, length 15 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends, length 35 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends, length 50 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends, length 25 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends, length 30 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 3/8 inch O.D. flared ends, suction line size 5/8 inch O.D. flared ends, length 30 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 3/8 inch O.D. flared ends, suction line size 5/8 inch O.D. flared ends, length 50 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 3/8 inch O.D. flared ends, suction line size 5/8 inch O.D. flared ends, length 25 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 3/8 inch O.D. flared ends, suction line size 5/8 inch O.D. flared ends, length 15 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 3/8 inch O.D. flared ends, suction line size 5/8 inch O.D. flared ends, length 35 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends