36,000 BTU ACiQ Standard 24 SEER2 3 Zone Floor Mount Mini Split Heat Pump System - R454B | 230V - 12 + 12 + 24

Introducing ACiQ's ES-36Z-M4B Multi-Zone Heat Pump Condenser

ACiQ offers a smart solution to adaptive heating and cooling for almost any space and climate, all at an affordable cost. The ES-36Z-M4B is a multi-zone heat pump condenser that can run up to 4 air handlers off a single condenser, saving space outside while keeping your home perfectly comfortable. Here are some quick facts about this impressive unit:

Quick Facts:

• 36,000 BTU, 23.9 SEER2 multi-zone heat pump condenser
• Designed to function with up to 4 attached air handlers
• Efficient cooling from 5°F to 122°F outdoor temperatures
• Efficient heating from -13°F to 75°F outdoor temperatures
• Integrated Max Heat technology with base pan heater
• Gold Fin full-protection coating on condenser coil
• Quiet operation at even the highest workloads

36,000 BTU, 23.9 SEER2

The ES-36Z-M4B is a versatile unit that can easily support up to 4 air handlers with up to 1.25 times the condenser BTU rating, or 45,000 BTU across all air handlers. This adaptive, inverter condenser constantly self-adjusts to provide the precise amount of heating or cooling needed to maintain your desired temperature in each room or zone. With the ability to set different temperatures in each room, you can even turn off heating and cooling in unused areas. The high efficiency rating of 23.9 SEER2 means you are buying a system designed to intelligently save you money both upfront and over the lifetime of the unit.

Please note that although the condenser is pre-charged, this unit does not have quick-connect line set connectors and is not a self-install unit. You will need a professional to add more refrigerant and vacuum the lines as needed. Installation materials such as line sets, control wire, drain hose, whip, and disconnect are not included but are available at an additional cost in the Accessories section to the right of this text. For all multi-zone ACiQ condensers, a minimum of two air handlers is needed for the unit to function.

ACiQ Floor Mounted Air Handlers for Efficient Heating and Cooling

When space for a standard high wall unit is not available, ACiQ Floor Mounted air handlers are the ideal solution. Also known as heat console type air handlers, these units surface mount low on the wall or on the floor, making them perfect for sun porches or attic rooms with limited wall space. They are wider, taller, and slightly shallower than high wall units, and are optimized for heating.

Optimized for Heat

ACiQ Floor Mounted air handlers are designed to take in return air at the top edge and deliver it at the bottom, making them ideal for heating. By delivering warm air at floor level, stratification due to heat rise is eliminated. When the unit is put into cooling mode, the airflow direction is reversed to improve air mixing in the room.

Features

• 12,000 BTU of heating or cooling power
• Dry and fan modes are also available
• Suitable for small rooms in most climates
• Remote control thermostat included for convenient temperature adjustments

Note: The 18k and 24k models may have a slightly different appearance from the 12k model, and can be surface mounted on the floor or ceiling. Please refer to the appropriate manual for your specific model.

Upgrade your HVAC system with the efficient and space-saving ACiQ Floor Mounted air handlers. Perfect for sun porches and attic rooms, these units provide optimal heating and cooling while taking up minimal wall space. Contact us today to learn more about the ACiQ Floor Mounted air handlers and installation options.

ACiQ Floor Mounted Air Handlers for Efficient Heating and Cooling

When space for a standard high wall unit is not available, ACiQ Floor Mounted air handlers are the ideal solution. Also known as heat console type air handlers, these units surface mount low on the wall or on the floor, making them perfect for sun porches or attic rooms with limited wall space. They are wider, taller, and slightly shallower than high wall units, and are optimized for heating.

Optimized for Heat

ACiQ Floor Mounted air handlers are designed to take in return air at the top edge and deliver it at the bottom, making them ideal for heating. By delivering warm air at floor level, stratification due to heat rise is eliminated. When the unit is put into cooling mode, the airflow direction is reversed to improve air mixing in the room.

Features

• 24,000 BTU of heating or cooling power
• Dry and fan modes are also available
• Suitable for small rooms in most climates
• Remote control thermostat included for convenient temperature adjustments

Note: The 18k and 24k models may have a slightly different appearance from the 12k model, and can be surface mounted on the floor or ceiling. Please refer to the appropriate manual for your specific model.

Upgrade your HVAC system with the efficient and space-saving ACiQ Floor Mounted air handlers. Perfect for sun porches and attic rooms, these units provide optimal heating and cooling while taking up minimal wall space. Contact us today to learn more about the ACiQ Floor Mounted air handlers and installation options.

Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends, length 15 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends, length 25 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 3/8 inch O.D. flared ends, suction line size 5/8 inch O.D. flared ends, length 25 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 3/8 inch O.D. flared ends, suction line size 5/8 inch O.D. flared ends, length 30 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends, length 35 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends, length 50 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 3/8 inch O.D. flared ends, suction line size 5/8 inch O.D. flared ends, length 50 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends