1-888-485-0777
Today's Hours 10am - 6pm est
Â
AHRI Number:207825576
When space for a standard high wall unit is not available, ACiQ Floor Mounted air handlers are the ideal solution. Also known as heat console type air handlers, these units surface mount low on the wall or on the floor, making them perfect for sun porches or attic rooms with limited wall space. They are wider, taller, and slightly shallower than high wall units, and are optimized for heating.
ACiQ Floor Mounted air handlers are designed to take in return air at the top edge and deliver it at the bottom, making them ideal for heating. By delivering warm air at floor level, stratification due to heat rise is eliminated. When the unit is put into cooling mode, the airflow direction is reversed to improve air mixing in the room.
Note: The 18k and 24k models may have a slightly different appearance from the 12k model, and can be surface mounted on the floor or ceiling. Please refer to the appropriate manual for your specific model.
Upgrade your HVAC system with the efficient and space-saving ACiQ Floor Mounted air handlers. Perfect for sun porches and attic rooms, these units provide optimal heating and cooling while taking up minimal wall space. Contact us today to learn more about the ACiQ Floor Mounted air handlers and installation options.
Are you looking for an affordable and intelligent solution to heating and cooling your home? Look no further than ACiQ-18Z-HH-M2B. This multi zone heat pump condenser is designed to provide efficient and adaptive heating and cooling in almost any space and climate, all at an affordable cost. Here are some quick facts about this system:
The ACiQ-18Z-HH-M2B is an adaptive, inverter condenser that can support up to 2 air handlers at up to 1.25 times the condenser BTU rating, or 22,500 BTU across all air handlers. This system is designed to constantly self-adjust to provide the precise amount of heating or cooling needed to maintain your desired temperature in each room or zone. You can even set different temperatures for each room or turn off heating and cooling in unused areas. With a high efficiency rating of 21.5 SEER, you can save money both upfront and over the lifetime of the unit.
It's important to note that although the condenser is pre-charged, this equipment model does not have quick connect line set connectors and is not a self-install unit. You will need a professional to add more refrigerant and vacuum the lines as needed. Installation materials such as line sets, control wire, drain hose, whip and disconnect are not included, but are available at additional cost in the Accessories section. Keep in mind that a minimum of two air handlers is needed for the unit to function.
Upgrade your home's heating and cooling system with the affordable and intelligent ACiQ-18Z-HH-M2B.
E Liteis a plastic pad designed as a mounting base for air conditioning condensers. The rugged design provides uniform and generous ribbing for optimum, self-leveling ground support without inserts. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but not too light. A subtle texture prevents unit slide and presents a classic appearance, which is enhanced by rounded edges and a concrete gray color. Each pad is molded with its size in raised letters.
This wall mount bracket is perfect for outdoor mini split condensers. The length of the the wall bracket arms are 23" long. The condensing unit is mounted onto the L-shaped brackets and fastened using the bolts and anti-vibration washers provided.
Features:12,000 BTU Floor Mounted ACiQ Mini-Split Air Handler | |
---|---|
SKU | ACIQ-12FM-HH-MB |
Weight (in lbs) | 41.450000 |
Brand/Manufacturer | ACiQ |
Controller | Wireless Included |
Cooling BTU | 12,000 BTU |
Heating BTU | 12,000 BTU |
Maximum CFM | 441 |
Decibel Level (dBA) | As low as 25 |
Electric Heat | Heat Pump |
Energy Star | Yes |
Refrigerant | R410A |
Liquid Line | 1/4" |
Suction Line | 1/2" |
Electrical | 208/230V 1 Phase 60Hz |
Phase | Single Phase |
Max Breaker Size | 15 |
Min. Breaker Size | 15 |
BTU/Tonnage | 12,000 BTU/1 Ton |
Mini-Split Type | Low Wall/Ceiling |
Zone Compatibility | Multi Zone |
Height | 24.45" |
Width | 31.26 |
Depth | 7.87 |
Warranty | 12 year compressor, 7 year parts with online registration |
Resources | |
Safety Information | PROPOSITION 65 WARNING |
18,000 BTU ACiQ Multi Zone Condenser w/ Extreme Heat | |
SKU | ACIQ-18Z-HH-M2B |
Refrigerant Charge | 50' |
Weight (in lbs) | 160.940000 |
AHRI Certificate Number | 207825576 |
Brand/Manufacturer | ACiQ |
HSPF | 9.8 |
Cooling BTU | 19000 BTU |
Heating BTU | 20000 BTU |
Decibel Level (dBA) | 63.4 |
Electric Heat | Heat Pump |
Energy Star | Yes |
Refrigerant | R410A |
SEER1 (Efficiency) | 21-22 |
SEER2 (Efficiency) | 22 |
EER | 12.5 |
Compressor Type | Rotary |
Liquid Line | 1/4" (2) |
Suction Line | 3/8" (2) |
Electrical | 208/230V 1 Phase 60 Hz |
Max Breaker Size | 25 Amps |
Min. Breaker Size | 20 Amps |
Tonnage | 1.5 Ton |
BTU/Tonnage | 18,000 BTU/1.5 Ton |
Mini-Split Type | Wall Mounted |
Zone Compatibility | Multi Zone |
Ambient Temperature Range | -22 ~ 122 |
Height | 31-9/10" |
Width | 37-1/4" |
Depth | 16-1/5" |
Warranty | 12 year compressor, 7 year parts with online registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
Diversitech E Lite Equipment Pad 18" x 38" x 3" | |
SKU | EL1838-3 |
Weight (in lbs) | 16.000000 |
Brand/Manufacturer | Online Supply |
Height | 3" |
Width | 18" |
Depth | 38" |
Safety Information | PROPOSITION 65 WARNING |
Wall Mount Bracket for Mini Split Systems | |
SKU | HW-600 |
Weight (in lbs) | 9.200000 |
Brand/Manufacturer | Online Supply |
Length | 23" |
Height | 20" |
Width | 6" |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |