ACiQ 4 Ton 16 SEER High Efficiency Central Heat Pump System | Inverter | Extreme Series

ACiQ-48-HPB: Unitary Central Split Heat Pump System

The ACiQ Central series model ACiQ-48-HPB is a unitary central split heat pump system designed for standard ductwork applications. This system features a variable, inverter compressor combined with a communicating thermostat, allowing it to vary the refrigerant flow through the condenser coil based on conditions. This smart technology sets this unit apart from traditional heat pumps, delivering superior performance and savings for homeowners.

Quick Facts

• Programmable, communicating thermostat included
• 48,000 BTU, 15.6 SEER2 heat pump system for use with ductwork
• Efficient cooling from 5 F to 122 F outdoor temperatures
• Efficient heating from -22 F to 75 F outdoor temperatures
• Max Heat base pan heater technology
• Durable Gold Fin heat exchanger coating
• Quiet operation at even the highest workloads for a truly ACiQ experience

48,000 BTU, 15.6 SEER2

The ACiQ-48-HPB has an output of 48,000 BTU or 4 tons, making it ideal for heating and cooling a small house with the right air handler and ideal conditions. With an efficiency rating of 16 SEER, this system delivers intelligent comfort at an affordable cost, while saving homeowners money upfront and over the entire lifetime of the unit. The SEER2 rating is significantly higher than the average central system brand, meaning homeowners will see a significant decrease in operating costs in most installations.

ACiQ Central Series Split Systems: Enhanced Comfort

Experience intelligent heat pump technology and enhanced comfort with ACiQ's Central Series split systems, all at a reasonable cost. The ACiQ-48-AHB air handler is designed with a variable blower and communicating technology to respond perfectly to weather conditions at all times. The thermostat monitors the performance of both indoor and outdoor units, enabling the system to self-adjust for maximum efficiency while delivering ideal comfort. The air handler efficiently distributes heated and cooled air throughout your home by connecting to your existing ductwork.

Key Features:

• Able to cover up to a large house in ideal conditions
• 48,000 BTU, 4 ton wall-mounted air handler with remote
• Intelligent comfort at an affordable cost
• Quiet operation even under high workloads for a truly ACiQ experience

Installation and Maintenance

Installation of the ACiQ-48-AHB air handler is very similar to installing any replacement air handler, with the exception of using included flared, compression adapters that are brazed to traditional line sets. You can use the included thermostat or any 24v thermostat with 3 stages of heating to control the system. For added protection, you can add electric strip heat as a backup system for the coldest days of the year. The intelligent control board displays fault codes in case part of the system requires maintenance. Please note that in order for this air handler to function as a heat pump, it must be installed with a condenser and other installation equipment, which are available at an additional cost if not already included in this product bundle. An electric heater coil is necessary for straight electric heating, and it is also available at an additional cost.

Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.

Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Linesets are available in different lengths and diameters to fit most applications.

The EAH-05B is a 5kW heater coil that can be used to add electric heating to your ACiQ unitary ducted heat pump systems. This heater coil is designed specifically for use in ACiQ unitary air handlers, and is capable of providing a supported output of 34,100 BTU, making it ideal for covering a small house in ideal climates. It's important to note that the EAH-05B requires a 30 amp breaker to function properly.

Compatible Air Handlers

• ACiQ-24-AH
• ACiQ-36-AH
• ACiQ-48-AH

The EAH-10B is a 10kW heater coil that can be used to add electric heating to your ACiQ unitary ducted heat pump systems. This heater coil is designed specifically for use in ACiQ unitary air handlers, and is capable of providing a supported output of 34,100 BTU, making it ideal for covering an average-sized house in ideal climates. It's important to note that the EAH-10B requires a 60 amp breaker to function properly.

Compatible Air Handlers

• ACiQ-24-AH
• ACiQ-36-AH
• ACiQ-48-AH

The EAH-15B is a 15kW heater coil designed for use in ACiQ unitary air handlers, which allows you to add straight electric heating to ACiQ unitary ducted heat pump systems. With a supported output of 51,150 BTU, this heater coil can generally cover an average house in ideal climates.

Compatibility

The EAH-15B heater coil is compatible with the following ACiQ unitary air handlers:

• ACiQ-36-AH
• ACiQ-48-AH

Installation Requirements

Please note that the EAH-15B heater coil requires one 60 amp and one 30 amp breaker to function. Additionally, professional installation is recommended to ensure safe and proper operation of the heater coil.

ACiQ EAH-20B 20kW Heater Coil for Unitary Air Handlers

The ACiQ EAH-20B is a 20kW heater coil that can be added to ACiQ unitary air handlers, providing straight electric heating for ducted heat pump systems. With a supported output of 68,200 BTU, this heater coil can cover a large house in ideal climates, making it an efficient and effective way to keep your home warm during the colder months.

It is important to note that the EAH-20B requires the equivalent of two 60-amp breakers to function and is only compatible with the ACiQ-48-AH air handler.

By adding the EAH-20B heater coil to your ACiQ unitary air handler, you can enjoy reliable and efficient heating throughout your home, even in the coldest weather conditions.