36,000 BTU ACiQ 2- Zone Wall Mounted Mini Split System w/ Central Air Handler 12+24



In stock





100% of 100
Availability: In Stock - Ready to Ship

Authorized ACiQ Dealer

AHRI Certified

AHRI Number:207825582

Suggested Retail $7,198.65
Your Low Price $4,836.00
Free Shipping

Required Fields *

Customize 36,000 BTU ACiQ 2- Zone Wall Mounted Mini Split System w/ Central Air Handler 12+24
36,000 BTU Multi Zone Condenser w/ Extreme Heat
36,000 BTU Multi Zone Condenser w/ Extreme Heat   + $3,132.00
12k BTU Wall Mounted (400 - 550 sq ft)
12k BTU Wall Mounted (400 - 550 sq ft)   + $425.00
24k BTU Ducted (1,000 - 1,250 sq ft)
24k BTU Ducted (1,000 - 1,250 sq ft)   + $1,279.00
Equipment Pad
36,000 BTU ACiQ 2- Zone Wall Mounted Mini Split System w/ Central Air Handler 12+24


Accessories for this product


ACiQ's multi zone mini split systems are designed to give you intelligent technology and superior comfort, all at a reasonable cost. With the ACiQ Extreme Heat multi zone series ACiQ-48Z-HH-M5B / 2-ACIQ-18CC-HH-MB system, you get higher SEER and better low ambient (hyper heat) performance than the competition.

36,000 BTU ACiQ Multi Zone Condenser w/ Extreme Heat

ACiQ-36Z-HH-M4B: The Affordable Smart Solution to Adaptive Heating and Cooling

Are you looking for an affordable and intelligent solution to heating and cooling your home? Look no further than ACiQ-36Z-HH-M4B. This multi zone heat pump condenser is designed to provide efficient and adaptive heating and cooling in almost any space and climate, all at an affordable cost. Here are some quick facts about this system:

Quick Facts:

  • 36,000 BTU, 21.5 SEER multi zone heat pump condenser
  • Can function with up to 4 attached air handlers
  • Efficient cooling from -22 F to 122 F outdoor temperatures
  • Efficient heating from -22 F to 57 F outdoor temperatures
  • Integrated Max Heat technology with base pan heater
  • Gold Fin full-protection coating on condenser coil
  • Quiet operation even at the highest workloads

36,000 BTU, 21.5 SEER

The ACiQ-36Z-HH-M4B is an adaptive, inverter condenser that can support up to 4 air handlers at up to 1.25 times the condenser BTU rating, or 45,000 BTU across all air handlers. This system is designed to constantly self-adjust to provide the precise amount of heating or cooling needed to maintain your desired temperature in each room or zone. You can even set different temperatures for each room or turn off heating and cooling in unused areas. With a high efficiency rating of 21.5 SEER, you can save money both upfront and over the lifetime of the unit.

It's important to note that although the condenser is pre-charged, this equipment model does not have quick connect line set connectors and is not a self-install unit. You will need a professional to add more refrigerant and vacuum the lines as needed. Installation materials such as line sets, control wire, drain hose, whip and disconnect are not included, but are available at additional cost in the Accessories section. Keep in mind that a minimum of two air handlers is needed for the unit to function.

Upgrade your home's heating and cooling system with the affordable and intelligent ACiQ-36Z-HH-M4B.

12,000 BTU ACiQ Platinum Multi Zone Air Handler w/ WiFi

The ACiQ Platinum air handler is a high-performance heating and cooling system that is designed to provide efficient, adaptive temperature control for small to medium sized rooms. It can be used with any ACiQ Multizone condenser or the Platinum Single Zone condenser to create a highly efficient, Hyper Heat system that can help you save money on your energy bills.


  • 12,000 BTU wall mounted air handler with included remote control
  • WiFi capable using free Net Home Plus app, Google Home, or Alexa
  • Easier maintenance and installation
  • Multizone compatible, heat or cool multiple rooms on one outdoor unit
  • Enhanced Dry mode, intelligent sleep mode, power save mode

Intelligent Heating and Cooling

The ACiQ-12W-HH-MB air handler includes a soft LED display on the front of the unit, which shows room temperature by default but can also display temperature setpoint changes and mode changes. The self-diagnosing control board will also show any error codes to ensure the unit runs properly throughout its lifetime. The display can be switched off if desired, and the smart remote control has a built-in LCD display to show these notifications as well.

WiFi Options

The ACiQ air handler is WiFi ready, allowing you to control your home's heating and cooling via a smart device (iOS or Android) from anywhere in the world. It is also compatible with Amazon Alexa and Google Assistant.

Installation Requirements

Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, which may be available at an additional cost if not already included in this product bundle.

24,000 BTU ACiQ Multi Zone Ducted Air Handler


Ductless Multi Zone air handlers seamlessly connect to your existing ductwork, allowing you to combine ducted heating and cooling with traditional mini split air handlers. This comprehensive system, powered by a single outside condenser, ensures maximum comfort, energy efficiency, and zoned control for independent temperature regulation in different areas of your home. The indoor units draw power from the outdoor condenser, eliminating the need for additional circuits unless you choose to install optional electric backup heat. These air handlers are particularly suitable for homes that have existing ductwork in some areas but lack it in others, such as finished basements, attics, or additions.


  • 24,000 BTU, 2 Ton central ducted air handler
  • Matches with Multi Zone and Platinum Single Zone condensers
  • Can be used as part of a Multi Zone system with other air handlers
  • Variable DC blower
  • Upflow, downflow, horizontal left or right
  • Manufactured home and mobile home approved
  • Wired controller included, with remote control for setup
  • Can be wired to 24V thermostats - see Quick Start Guide below
  • Wifi compatible with optional KJR-120N controller
E Lite Equipment Pad 18" x 38" x 3"

E Liteis a plastic pad designed as a mounting base for air conditioning condensers. The rugged design provides uniform and generous ribbing for optimum, self-leveling ground support without inserts. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but not too light. A subtle texture prevents unit slide and presents a classic appearance, which is enhanced by rounded edges and a concrete gray color. Each pad is molded with its size in raised letters.

  • High recycled plastic content
  • Subtle texture resists unit slide
  • Unaffected by UV or weather
  • Uniform ribbing transfers load evenly
  • Drillable for securing unit
  • Lightweight, yet rugged
Wall Mount Bracket for Condensers 30"

This Diversitech wall mount bracket is perfect for outdoor condensers. The length of the the wall bracket arms are 30" long. The condensing unit is mounted onto the L-shaped brackets.


  • Steel: 10 GA
  • Powder-coated grey Finish
  • Load rating: 600 lbs per pair
  • Holes will accommodate anchors for installation
  • Warranty: 1 year
  • ACB line of wall brackets are approved by the Florida Building Commission and are High Velocity Hurricane Zone (HVHZ) approved. (See product certification documentation for complete details.)

Product Specifications

More Information
36,000 BTU ACiQ 2- Zone Wall Mounted Mini Split System w/ Central Air Handler 12+24
AHRI Certificate Number207825582
BTU/Tonnage48,000 BTU/4 Ton
Mini-Split TypeCeiling Cassette
Zone CompatibilityMulti Zone
Indoor Units18 + 18
Zone/Room 1 Size15/18k for 600-1,000 sq ft
Zone/Room 2 Size15/18k for 600-1,000 sq ft
Warranty12 year compressor, 7 year parts with online registration

Reviews 4

Write Your Own Review
You're reviewing:36,000 BTU ACiQ 2- Zone Wall Mounted Mini Split System w/ Central Air Handler 12+24
Your Rating

Questions and Answers

Customer Questions
No Questions
Did you find what you were looking for?