1-888-485-0777
Today's Hours 10am - 6pm est
AHRI Number:210857356
Save up to 70% off Local HVAC Prices
Inverter Condenser - Inverter technology changes AC power to DC, allowing the compressor inside your condenser to speed up and slow down. This allows the system to self-adjust BTU output based on demand. As the weather changes, so will your system output.
Learning System - This system is packed with sensors and controls the air temperature inside and outside, system performance, duct pressure, refrigerant temperature. The first time you start your system it enters a learning mode, keeping air moving across the sensors and storing information so future startups and run cycles will be at max efficiency.
Size for Heat - The self-adjusting inverter design allows you to size your system based on heat demand. With standard heat pumps, sizing for heat can mean a muggy house during summer. The ACiQ Next Gen 5-ton heat pump system automatically adjusts to run like a 4-ton, 3-ton or a 2-ton to keep you cool and dry.
Extreme Heat Technology - Extreme Heat means extended temperature range heating all the way down to -22°F. Traditional heat pumps don't make significant heat below about 30°F outside temperature. When below that threshold, they rely on expensive backup electric heat. The ACiQ Next Gen with Extreme Heat uses the inverter to vary the refrigerant flow, allowing for maximum heat extraction during extreme cold temperatures. The backup electric heat supplements the heat pump, and only takes over below -22°F. The heat pump gives 100% at 0°F, and still gives 80% at -22°F, saving you up to 75% on cold weather heating bills.
With an efficiency rating of 15.3 SEER2, the variable output ACiQ-60-HPB will keep you comfortable across a wide range of conditions. Use our handy size calculator here to determine the demand for your home. For cooling, this system can operate anywhere from 12,000 BTU to 36,000 BTU without short cycling. For heating, this system is capable of 28,000 BTU at -22°F all the way up to 60,000 BTU at 50°F. This increased range means it fits more possible applications.
Please note that this condenser requires an ACiQ unitary ducted air handler to function, if not already included in the bundle on this page, along with line sets and other installation accessories available at an additional cost in the Accessories section of this page. It is recommended to have a professional install this system because it is not compatible with pre-charged line sets or other DIY equipment.
ACiQ 5 Ton 16.4 SEER High Efficiency Central Heat Pump | Inverter | Extreme Heat | |
---|---|
SKU | ACiQ-60-HPB |
Refrigerant Charge | 25' |
Weight | 271.610000 |
AHRI Certificate Number | 210857356 |
Manufacturer | ACiQ |
HSPF2 | 9.4 |
Cooling BTU | 55000 BTU |
Heating BTU | 59000 BTU |
Maximum CFM | 1805.88 |
Decibel Level (dBA) | 51 |
Electric Heat | Heat Pump |
Energy Star | Yes |
Refrigerant | R410A |
SEER2 | 15.3 |
Condenser Stages | Variable Speed |
Compressor Type | Rotary |
Liquid Line | 3/8" |
Suction Line | 7/8" |
Electrical | 208/230V 1 Phase 60 Hz |
Max Breaker Size | 60 A |
Min. Breaker Size | 42 A |
Tonnage | 5 Ton |
Min/Max Outdoor Temp for Heating | -22°F~75°F |
Min/Max Outdoor Temp for Cooling | 5°F~122°F |
Ambient Temperature Range | -22°F~122°F |
Height | 52.48" |
Width | 37.48" |
Depth | 16.34" |
Warranty | 12 year compressor, 7 year parts with online registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |