ACIQ Tri Zone Mini Split System - Design Your Own

By

ACiQ

In stock

Model

ACIQ Tri Zone

ID

102574

Rating:
100% of 100
Availability: In Stock - Ready to Ship

Authorized ACiQ Dealer

Suggested Retail $2,629.00
Your Low Price $1,679.00
Free Shipping

Required Fields *

Customize ACIQ Tri Zone Mini Split System - Design Your Own
6k BTU Wall Mounted (up to 250 sq ft)
6k BTU Wall Mounted (up to 250 sq ft)
6k BTU Wall Mounted (up to 250 sq ft)
27,000 BTU Multi Zone Condenser w/ Extreme Heat
Equipment Pad
Perfect Aire Design Your Own Tri Zone Heat Pump System

$1,679.00

Accessories for this product

Description

27,000 BTU ACiQ Multi Zone Condenser w/ Extreme Heat

ACIQ-27Z-HH-M3B: The Affordable Smart Solution to Adaptive Heating and Cooling

Are you looking for an affordable and intelligent solution to heating and cooling your home? Look no further than ACIQ-27Z-HH-M3B. This multi zone heat pump condenser is designed to provide efficient and adaptive heating and cooling in almost any space and climate, all at an affordable cost. Here are some quick facts about this system:

Quick Facts:

  • 27,000 BTU, 22 SEER multi zone heat pump condenser
  • Can function with up to 3 attached air handlers
  • Efficient cooling from -22 F to 122 F outdoor temperatures
  • Efficient heating from -22 F to 57 F outdoor temperatures
  • Integrated Max Heat technology with base pan heater
  • Gold Fin full-protection coating on condenser coil
  • Quiet operation even at the highest workloads

27,000 BTU, 22 SEER

The ACIQ-27Z-HH-M3B is an adaptive, inverter condenser that can support up to 3 air handlers at up to 1.25 times the condenser BTU rating, or 33,750 BTU across all air handlers. This system is designed to constantly self-adjust to provide the precise amount of heating or cooling needed to maintain your desired temperature in each room or zone. You can even set different temperatures for each room or turn off heating and cooling in unused areas. With a high efficiency rating of 21.5 SEER, you can save money both upfront and over the lifetime of the unit.

It's important to note that although the condenser is pre-charged, this equipment model does not have quick connect line set connectors and is not a self-install unit. You will need a professional to add more refrigerant and vacuum the lines as needed. Installation materials such as line sets, control wire, drain hose, whip and disconnect are not included, but are available at additional cost in the Accessories section. Keep in mind that a minimum of two air handlers is needed for the unit to function.

Upgrade your home's heating and cooling system with the affordable and intelligent ACIQ-27Z-HH-M3B.

36,000 BTU ACiQ Multi Zone Condenser w/ Extreme Heat

ACiQ-36Z-HH-M4B: The Affordable Smart Solution to Adaptive Heating and Cooling

Are you looking for an affordable and intelligent solution to heating and cooling your home? Look no further than ACiQ-36Z-HH-M4B. This multi zone heat pump condenser is designed to provide efficient and adaptive heating and cooling in almost any space and climate, all at an affordable cost. Here are some quick facts about this system:

Quick Facts:

  • 36,000 BTU, 21.5 SEER multi zone heat pump condenser
  • Can function with up to 4 attached air handlers
  • Efficient cooling from -22 F to 122 F outdoor temperatures
  • Efficient heating from -22 F to 57 F outdoor temperatures
  • Integrated Max Heat technology with base pan heater
  • Gold Fin full-protection coating on condenser coil
  • Quiet operation even at the highest workloads

36,000 BTU, 21.5 SEER

The ACiQ-36Z-HH-M4B is an adaptive, inverter condenser that can support up to 4 air handlers at up to 1.25 times the condenser BTU rating, or 45,000 BTU across all air handlers. This system is designed to constantly self-adjust to provide the precise amount of heating or cooling needed to maintain your desired temperature in each room or zone. You can even set different temperatures for each room or turn off heating and cooling in unused areas. With a high efficiency rating of 21.5 SEER, you can save money both upfront and over the lifetime of the unit.

It's important to note that although the condenser is pre-charged, this equipment model does not have quick connect line set connectors and is not a self-install unit. You will need a professional to add more refrigerant and vacuum the lines as needed. Installation materials such as line sets, control wire, drain hose, whip and disconnect are not included, but are available at additional cost in the Accessories section. Keep in mind that a minimum of two air handlers is needed for the unit to function.

Upgrade your home's heating and cooling system with the affordable and intelligent ACiQ-36Z-HH-M4B.

48,000 BTU ACiQ Multi Zone Condenser w/ Extreme Heat

ACIQ-48Z-HH-M5B: The Affordable Smart Solution to Adaptive Heating and Cooling

Are you looking for an affordable and intelligent solution to heating and cooling your home? Look no further than ACIQ-48Z-HH-M5B. This multi zone heat pump condenser is designed to provide efficient and adaptive heating and cooling in almost any space and climate, all at an affordable cost. Here are some quick facts about this system:

Quick Facts:

  • 48,000 BTU, 21 SEER multi zone heat pump condenser
  • Can function with up to 5 attached air handlers
  • Efficient cooling from -22 F to 122 F outdoor temperatures
  • Efficient heating from -22 F to 57 F outdoor temperatures
  • Integrated Max Heat technology with base pan heater
  • Gold Fin full-protection coating on condenser coil
  • Quiet operation even at the highest workloads

48,000 BTU, 21 SEER

The ACIQ-48Z-HH-M5B is an adaptive, inverter condenser that can support up to 5 air handlers at up to 1.25 times the condenser BTU rating, or 60,000 BTU across all air handlers. This system is designed to constantly self-adjust to provide the precise amount of heating or cooling needed to maintain your desired temperature in each room or zone. You can even set different temperatures for each room or turn off heating and cooling in unused areas. With a high efficiency rating of 21 SEER, you can save money both upfront and over the lifetime of the unit.

It's important to note that although the condenser is pre-charged, this equipment model does not have quick connect line set connectors and is not a self-install unit. You will need a professional to add more refrigerant and vacuum the lines as needed. Installation materials such as line sets, control wire, drain hose, whip and disconnect are not included, but are available at additional cost in the Accessories section. Keep in mind that a minimum of two air handlers is needed for the unit to function.

Upgrade your home's heating and cooling system with the affordable and intelligent ACIQ-48Z-HH-M5B.

55,000 BTU ACiQ Multi Zone Condenser w/ Extreme Heat

ACiQ-55Z-HH-M5B: The Adaptive Solution to Affordable Heating and Cooling

ACiQ offers an intelligent solution to heating and cooling that is adaptable to any space and climate, all at an affordable cost. With the ACiQ-55Z-HH-M5B, you can operate up to 5 air handlers from a single condenser, saving outdoor space and keeping you comfortable in your home.

Quick Facts

  • 55,000 BTU and 22 SEER2 multi-zone heat pump condenser
  • Capable of operating with up to 5 attached air handlers
  • Efficient cooling from -22°F to 122°F outdoor temperatures
  • Efficient heating from -22°F to 57°F outdoor temperatures
  • Integrated Max Heat technology with base pan heater
  • Gold Fin full-protection coating on condenser coil
  • Quiet operation even at the highest workloads

55,000 BTU, 22 SEER2

The ACiQ-55Z-HH-M5B is a 55,000 BTU condenser designed to effortlessly support up to 4 air handlers at a maximum of 1.25 times the condenser BTU rating, or 60,000 BTU across all air handlers. This adaptive, inverter condenser is continuously self-adjusting to provide the precise amount of heating or cooling necessary to maintain the desired temperature in each room or zone. With the ability to set different temperatures room by room and turn off heating and cooling in unused areas, combined with a high efficiency rating of 22 SEER2, you can rest assured that you are buying a system intelligently designed to save you money upfront and over the lifetime of the unit.

While the condenser comes pre-charged, it is important to note that this model does not have quick connect line set connectors and is not a self-install unit. Professional assistance is needed to add more refrigerant and vacuum the lines as necessary. Additionally, installation materials like line sets, control wire, drain hose, whip, and disconnect are not included but can be purchased at an additional cost in the Accessories section found to the right of this text. It is important to note that for all multi-zone ACiQ condensers, a minimum of two air handlers is required for the unit to function.

27,000 BTU ACiQ Multi Zone Condenser

Introducing ACiQ's ES-27Z-M3B Multi-Zone Heat Pump Condenser

ACiQ offers a smart solution to adaptive heating and cooling for almost any space and climate, all at an affordable cost. The ES-27Z-M3B is a multi-zone heat pump condenser that can run up to 3 air handlers off a single condenser, saving space outside while keeping your home perfectly comfortable. Here are some quick facts about this impressive unit:

Quick Facts:

  • 27,000 BTU, 24.6 SEER2 multi-zone heat pump condenser
  • Designed to function with up to 3 attached air handlers
  • Efficient cooling from 5°F to 122°F outdoor temperatures
  • Efficient heating from -13°F to 75°F outdoor temperatures
  • Integrated Max Heat technology with base pan heater
  • Gold Fin full-protection coating on condenser coil
  • Quiet operation at even the highest workloads

27,000 BTU, 24.6 SEER2

The ES-27Z-M3B is a versatile unit that can easily support up to 3 air handlers with up to 1.25 times the condenser BTU rating, or 33,750 BTU across all air handlers. This adaptive, inverter condenser constantly self-adjusts to provide the precise amount of heating or cooling needed to maintain your desired temperature in each room or zone. With the ability to set different temperatures in each room, you can even turn off heating and cooling in unused areas. The high efficiency rating of 24.6 SEER2 means you are buying a system designed to intelligently save you money both upfront and over the lifetime of the unit.

Please note that although the condenser is pre-charged, this unit does not have quick-connect line set connectors and is not a self-install unit. You will need a professional to add more refrigerant and vacuum the lines as needed. Installation materials such as line sets, control wire, drain hose, whip, and disconnect are not included but are available at an additional cost in the Accessories section to the right of this text. For all multi-zone ACiQ condensers, a minimum of two air handlers is needed for the unit to function.

36,000 BTU ACiQ Multi Zone Condenser

Introducing ACiQ's ES-36Z-M4B Multi-Zone Heat Pump Condenser

ACiQ offers a smart solution to adaptive heating and cooling for almost any space and climate, all at an affordable cost. The ES-36Z-M4B is a multi-zone heat pump condenser that can run up to 4 air handlers off a single condenser, saving space outside while keeping your home perfectly comfortable. Here are some quick facts about this impressive unit:

Quick Facts:

  • 36,000 BTU, 23.9 SEER2 multi-zone heat pump condenser
  • Designed to function with up to 4 attached air handlers
  • Efficient cooling from 5°F to 122°F outdoor temperatures
  • Efficient heating from -13°F to 75°F outdoor temperatures
  • Integrated Max Heat technology with base pan heater
  • Gold Fin full-protection coating on condenser coil
  • Quiet operation at even the highest workloads

36,000 BTU, 23.9 SEER2

The ES-36Z-M4B is a versatile unit that can easily support up to 4 air handlers with up to 1.25 times the condenser BTU rating, or 45,000 BTU across all air handlers. This adaptive, inverter condenser constantly self-adjusts to provide the precise amount of heating or cooling needed to maintain your desired temperature in each room or zone. With the ability to set different temperatures in each room, you can even turn off heating and cooling in unused areas. The high efficiency rating of 23.9 SEER2 means you are buying a system designed to intelligently save you money both upfront and over the lifetime of the unit.

Please note that although the condenser is pre-charged, this unit does not have quick-connect line set connectors and is not a self-install unit. You will need a professional to add more refrigerant and vacuum the lines as needed. Installation materials such as line sets, control wire, drain hose, whip, and disconnect are not included but are available at an additional cost in the Accessories section to the right of this text. For all multi-zone ACiQ condensers, a minimum of two air handlers is needed for the unit to function.

48,000 BTU ACiQ Multi Zone Condenser

Introducing ACiQ's ES-48Z-M5B Multi-Zone Heat Pump Condenser

ACiQ offers a smart solution to adaptive heating and cooling for almost any space and climate, all at an affordable cost. The ES-48Z-M5B is a multi-zone heat pump condenser that can run up to 5 air handlers off a single condenser, saving space outside while keeping your home perfectly comfortable. Here are some quick facts about this impressive unit:

Quick Facts:

  • 48,000 BTU, 23.4 SEER2 multi-zone heat pump condenser
  • Designed to function with up to 5 attached air handlers
  • Efficient cooling from 5°F to 122°F outdoor temperatures
  • Efficient heating from -13°F to 75°F outdoor temperatures
  • Integrated Max Heat technology with base pan heater
  • Gold Fin full-protection coating on condenser coil
  • Quiet operation at even the highest workloads

48,000 BTU, 23.4 SEER2

The ES-48Z-M5B is a versatile unit that can easily support up to 5 air handlers with up to 1.25 times the condenser BTU rating, or 60,000 BTU across all air handlers. This adaptive, inverter condenser constantly self-adjusts to provide the precise amount of heating or cooling needed to maintain your desired temperature in each room or zone. With the ability to set different temperatures in each room, you can even turn off heating and cooling in unused areas. The high efficiency rating of 23.4 SEER2 means you are buying a system designed to intelligently save you money both upfront and over the lifetime of the unit.

Please note that although the condenser is pre-charged, this unit does not have quick-connect line set connectors and is not a self-install unit. You will need a professional to add more refrigerant and vacuum the lines as needed. Installation materials such as line sets, control wire, drain hose, whip, and disconnect are not included but are available at an additional cost in the Accessories section to the right of this text. For all multi-zone ACiQ condensers, a minimum of two air handlers is needed for the unit to function.

55,000 BTU ACiQ Multi Zone Condenser

Introducing ACiQ's ES-55Z-M5B Multi-Zone Heat Pump Condenser

ACiQ offers a smart solution to adaptive heating and cooling for almost any space and climate, all at an affordable cost. The ES-55Z-M5B is a multi-zone heat pump condenser that can run up to 5 air handlers off a single condenser, saving space outside while keeping your home perfectly comfortable. Here are some quick facts about this impressive unit:

Quick Facts:

  • 55,000 BTU, 21.3 SEER2 multi-zone heat pump condenser
  • Designed to function with up to 5 attached air handlers
  • Efficient cooling from 5°F to 122°F outdoor temperatures
  • Efficient heating from -13°F to 75°F outdoor temperatures
  • Integrated Max Heat technology with base pan heater
  • Gold Fin full-protection coating on condenser coil
  • Quiet operation at even the highest workloads

55,000 BTU, 21.3 SEER2

The ES-55Z-M5B is a versatile unit that can easily support up to 5 air handlers with up to 1.25 times the condenser BTU rating, or 60,000 BTU across all air handlers. This adaptive, inverter condenser constantly self-adjusts to provide the precise amount of heating or cooling needed to maintain your desired temperature in each room or zone. With the ability to set different temperatures in each room, you can even turn off heating and cooling in unused areas. The high efficiency rating of 21.3 SEER means you are buying a system designed to intelligently save you money both upfront and over the lifetime of the unit.

Please note that although the condenser is pre-charged, this unit does not have quick-connect line set connectors and is not a self-install unit. You will need a professional to add more refrigerant and vacuum the lines as needed. Installation materials such as line sets, control wire, drain hose, whip, and disconnect are not included but are available at an additional cost in the Accessories section to the right of this text. For all multi-zone ACiQ condensers, a minimum of two air handlers is needed for the unit to function.

6,000 BTU ACiQ Platinum Multi Zone Air Handler w/ WiFi

Platinum Performance

ACiQ Platinum air handlers can be used with any ACiQ Multizone condenser or the Platinum Single Zone condenser to create a highly efficient, Hyper Heat system. This air handler can handle small to medium sized rooms using adaptive technology to constantly monitor and maintain your ideal temperature no matter what the weather outside.

  • 6,000 BTU wall mounted air handler with included remote control
  • WiFi capable using free Net Home Plus app , Google Home or Alexa
  • Easier maintenance and installation
  • Multizone compatible heat or cool multiple rooms on one outdoor unit
  • Enhanced Dry mode, intelligent sleep mode, power save mode.

Intelligent Heating and Cooling

The ACiQ-06W-HH-MB air handler includes a soft LED display on the front of the unit giving you information at a glance. The display shows room temperature by default but can also show temperature setpoint changes and mode changes. To ensure your unit runs properly throughout its lifetime, this display will also show any error codes from its self-diagnosing control board. The display can be switched off if desired, and the included smart remote has a built-in LCD display to show these notifications as well.

WiFi Options

ACiQ is WiFi ready! The wall mounted air handlers come with everything you need to control your home's heating and cooling via smart device (iOS or Android) from anywhere in the world. ACiQ is also compatible with Amazon Alexa and Google Assistant.

Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost if not already included in this product bundle.

9,000 BTU ACiQ Platinum Multi Zone Air Handler w/ WiFi

The ACiQ Platinum air handler is a high-performance heating and cooling system that is designed to provide efficient, adaptive temperature control for small to medium sized rooms. It can be used with any ACiQ Multizone condenser or the Platinum Single Zone condenser to create a highly efficient, Hyper Heat system that can help you save money on your energy bills.

Features

  • 9,000 BTU wall mounted air handler with included remote control
  • WiFi capable using free Net Home Plus app, Google Home, or Alexa
  • Easier maintenance and installation
  • Multizone compatible, heat or cool multiple rooms on one outdoor unit
  • Enhanced Dry mode, intelligent sleep mode, power save mode

Intelligent Heating and Cooling

The ACiQ-09W-HH-MB air handler includes a soft LED display on the front of the unit, which shows room temperature by default but can also display temperature setpoint changes and mode changes. The self-diagnosing control board will also show any error codes to ensure the unit runs properly throughout its lifetime. The display can be switched off if desired, and the smart remote control has a built-in LCD display to show these notifications as well.

WiFi Options

The ACiQ air handler is WiFi ready, allowing you to control your home's heating and cooling via a smart device (iOS or Android) from anywhere in the world. It is also compatible with Amazon Alexa and Google Assistant.

Installation Requirements

Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, which may be available at an additional cost if not already included in this product bundle.

12,000 BTU ACiQ Platinum Multi Zone Air Handler w/ WiFi

The ACiQ Platinum air handler is a high-performance heating and cooling system that is designed to provide efficient, adaptive temperature control for small to medium sized rooms. It can be used with any ACiQ Multizone condenser or the Platinum Single Zone condenser to create a highly efficient, Hyper Heat system that can help you save money on your energy bills.

Features

  • 12,000 BTU wall mounted air handler with included remote control
  • WiFi capable using free Net Home Plus app, Google Home, or Alexa
  • Easier maintenance and installation
  • Multizone compatible, heat or cool multiple rooms on one outdoor unit
  • Enhanced Dry mode, intelligent sleep mode, power save mode

Intelligent Heating and Cooling

The ACiQ-12W-HH-MB air handler includes a soft LED display on the front of the unit, which shows room temperature by default but can also display temperature setpoint changes and mode changes. The self-diagnosing control board will also show any error codes to ensure the unit runs properly throughout its lifetime. The display can be switched off if desired, and the smart remote control has a built-in LCD display to show these notifications as well.

WiFi Options

The ACiQ air handler is WiFi ready, allowing you to control your home's heating and cooling via a smart device (iOS or Android) from anywhere in the world. It is also compatible with Amazon Alexa and Google Assistant.

Installation Requirements

Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, which may be available at an additional cost if not already included in this product bundle.

18,000 BTU ACiQ Platinum Multi Zone Air Handler w/ WiFi

The ACiQ Platinum air handler is a high-performance heating and cooling system that is designed to provide efficient, adaptive temperature control for small to medium sized rooms. It can be used with any ACiQ Multizone condenser or the Platinum Single Zone condenser to create a highly efficient, Hyper Heat system that can help you save money on your energy bills.

Features

  • 18,000 BTU wall mounted air handler with included remote control
  • WiFi capable using free Net Home Plus app, Google Home, or Alexa
  • Easier maintenance and installation
  • Multizone compatible, heat or cool multiple rooms on one outdoor unit
  • Enhanced Dry mode, intelligent sleep mode, power save mode

Intelligent Heating and Cooling

The ACiQ-18W-HH-MB air handler includes a soft LED display on the front of the unit, which shows room temperature by default but can also display temperature setpoint changes and mode changes. The self-diagnosing control board will also show any error codes to ensure the unit runs properly throughout its lifetime. The display can be switched off if desired, and the smart remote control has a built-in LCD display to show these notifications as well.

WiFi Options

The ACiQ air handler is WiFi ready, allowing you to control your home's heating and cooling via a smart device (iOS or Android) from anywhere in the world. It is also compatible with Amazon Alexa and Google Assistant.

Installation Requirements

Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, which may be available at an additional cost if not already included in this product bundle.

24,000 BTU ACiQ Platinum Multi Zone Air Handler w/ WiFi

ACiQ Platinum Air Handlers for Efficient and Intelligent Temperature Control

ACiQ Platinum air handlers are the perfect addition to your home's heating and cooling system. They can be used with any ACiQ Multizone condenser or the Platinum Single Zone condenser to create a highly efficient, Hyper Heat system. With adaptive technology, these air handlers constantly monitor and maintain your ideal temperature no matter what the weather outside.

Main Features

  • 24,000 BTU wall mounted air handler with included remote control
  • WiFi capable using free Net Home Plus app, Google Home, or Alexa
  • Easier maintenance and installation
  • Multizone compatible - heat or cool multiple rooms on one outdoor unit
  • Enhanced Dry mode, intelligent sleep mode, power save mode

Intelligent Heating and Cooling

The ACiQ-09W-HH-MB air handler includes a soft LED display on the front of the unit that shows room temperature by default, but can also display temperature setpoint changes and mode changes. This display also shows any error codes from its self-diagnosing control board, ensuring that your unit runs properly throughout its lifetime. You can switch off the display if desired, and the included smart remote has a built-in LCD display to show these notifications as well.

WiFi Options

ACiQ is WiFi ready! The wall mounted air handlers come with everything you need to control your home's heating and cooling via smart device (iOS or Android) from anywhere in the world. ACiQ is also compatible with Amazon Alexa and Google Assistant, making it easy to integrate into your existing smart home system.

Please note that in order for the ACiQ Platinum air handlers to function, they must be installed with a condenser and other installation equipment, which are available at an additional cost if not already included in this product bundle.

12,000 BTU Floor Mounted ACiQ Mini-Split Air Handler

ACiQ Floor Mounted Air Handlers for Efficient Heating and Cooling

When space for a standard high wall unit is not available, ACiQ Floor Mounted air handlers are the ideal solution. Also known as heat console type air handlers, these units surface mount low on the wall or on the floor, making them perfect for sun porches or attic rooms with limited wall space. They are wider, taller, and slightly shallower than high wall units, and are optimized for heating.

Optimized for Heat

ACiQ Floor Mounted air handlers are designed to take in return air at the top edge and deliver it at the bottom, making them ideal for heating. By delivering warm air at floor level, stratification due to heat rise is eliminated. When the unit is put into cooling mode, the airflow direction is reversed to improve air mixing in the room.

Features

  • 12,000 BTU of heating or cooling power
  • Dry and fan modes are also available
  • Suitable for small rooms in most climates
  • Remote control thermostat included for convenient temperature adjustments

Note: The 18k and 24k models may have a slightly different appearance from the 12k model, and can be surface mounted on the floor or ceiling. Please refer to the appropriate manual for your specific model.

Upgrade your HVAC system with the efficient and space-saving ACiQ Floor Mounted air handlers. Perfect for sun porches and attic rooms, these units provide optimal heating and cooling while taking up minimal wall space. Contact us today to learn more about the ACiQ Floor Mounted air handlers and installation options.

18,000 BTU Floor Mounted ACiQ Mini-Split Air Handler

ACiQ Floor Mounted Air Handlers for Efficient Heating and Cooling

When space for a standard high wall unit is not available, ACiQ Floor Mounted air handlers are the ideal solution. Also known as heat console type air handlers, these units surface mount low on the wall or on the floor, making them perfect for sun porches or attic rooms with limited wall space. They are wider, taller, and slightly shallower than high wall units, and are optimized for heating.

Optimized for Heat

ACiQ Floor Mounted air handlers are designed to take in return air at the top edge and deliver it at the bottom, making them ideal for heating. By delivering warm air at floor level, stratification due to heat rise is eliminated. When the unit is put into cooling mode, the airflow direction is reversed to improve air mixing in the room.

Features

  • 18,000 BTU of heating or cooling power
  • Dry and fan modes are also available
  • Suitable for small rooms in most climates
  • Remote control thermostat included for convenient temperature adjustments

Note: The 18k and 24k models may have a slightly different appearance from the 12k model, and can be surface mounted on the floor or ceiling. Please refer to the appropriate manual for your specific model.

Upgrade your HVAC system with the efficient and space-saving ACiQ Floor Mounted air handlers. Perfect for sun porches and attic rooms, these units provide optimal heating and cooling while taking up minimal wall space. Contact us today to learn more about the ACiQ Floor Mounted air handlers and installation options.

24,000 BTU Floor Mounted ACiQ Mini-Split Air Handler

ACiQ Floor Mounted Air Handlers for Efficient Heating and Cooling

When space for a standard high wall unit is not available, ACiQ Floor Mounted air handlers are the ideal solution. Also known as heat console type air handlers, these units surface mount low on the wall or on the floor, making them perfect for sun porches or attic rooms with limited wall space. They are wider, taller, and slightly shallower than high wall units, and are optimized for heating.

Optimized for Heat

ACiQ Floor Mounted air handlers are designed to take in return air at the top edge and deliver it at the bottom, making them ideal for heating. By delivering warm air at floor level, stratification due to heat rise is eliminated. When the unit is put into cooling mode, the airflow direction is reversed to improve air mixing in the room.

Features

  • 24,000 BTU of heating or cooling power
  • Dry and fan modes are also available
  • Suitable for small rooms in most climates
  • Remote control thermostat included for convenient temperature adjustments

Note: The 18k and 24k models may have a slightly different appearance from the 12k model, and can be surface mounted on the floor or ceiling. Please refer to the appropriate manual for your specific model.

Upgrade your HVAC system with the efficient and space-saving ACiQ Floor Mounted air handlers. Perfect for sun porches and attic rooms, these units provide optimal heating and cooling while taking up minimal wall space. Contact us today to learn more about the ACiQ Floor Mounted air handlers and installation options.

9,000 BTU Concealed Duct ACiQ Mini-Split Air Handler

Benefits of Concealed Duct Air Handlers for Your Home

Concealed duct air handlers offer a discreet and efficient way to cool or heat your home without visible air handlers on your walls or ceilings. These flexible units are designed to be concealed above the ceiling, below the floor, above a closet ceiling, above a hallway ceiling, or behind a soffit. Here are some of the benefits of concealed duct air handlers:

1. Versatility

Concealed duct air handlers can be installed in various locations, giving you more flexibility with your home's design. They are perfect for small bedrooms or a master suite, as up to 4 flex duct runs can be connected, depending on the unit's capacity.

2. Simple Design

Concealed duct air handlers have a simple design that consists of a rear return air inlet and a front supply air outlet. The almost-silent squirrel cage fan pushes the cooled or heated air out of the unit, making it a quiet and efficient option for your home.

3. Customizable

The concealed duct system allows for a high level of customization, as you can field-fabricate plenums using ductboard or attach a pre-made manifold takeoff. This flexibility allows you to create a unique solution for your home's specific needs.

4. Suitable for New Construction or Additions

Concealed duct air handlers are best used in new construction projects or additions, as the installation requires pre-planning and is similar in scope to a standard home HVAC installation. However, the benefits of a concealed duct system are worth the effort.

5. Features

  • 9,000 BTU of heating or cooling
  • Dry and fan modes also available (MACIQ-12FM-HH-MB)
  • Good for a smaller room in most climates
  • Wall-mounted thermostat included

Installation Considerations

Concealed duct system installations require additional supplies such as flex ducting, register vents, plenums, and installation supplies, in addition to the equipment components. The concealed duct units have a factory-installed pump to lift the condensation. From there, you will need to use PVC to construct a drain system to a safe wastewater location.

Overall, concealed duct air handlers provide a discreet and customizable option for heating and cooling your home, with minimal impact on your home's design and aesthetic.

12,000 BTU Concealed Duct ACiQ Mini-Split Air Handler

Benefits of Concealed Duct Air Handlers for Your Home

Concealed duct air handlers offer a discreet and efficient way to cool or heat your home without visible air handlers on your walls or ceilings. These flexible units are designed to be concealed above the ceiling, below the floor, above a closet ceiling, above a hallway ceiling, or behind a soffit. Here are some of the benefits of concealed duct air handlers:

1. Versatility

Concealed duct air handlers can be installed in various locations, giving you more flexibility with your home's design. They are perfect for small bedrooms or a master suite, as up to 4 flex duct runs can be connected, depending on the unit's capacity.

2. Simple Design

Concealed duct air handlers have a simple design that consists of a rear return air inlet and a front supply air outlet. The almost-silent squirrel cage fan pushes the cooled or heated air out of the unit, making it a quiet and efficient option for your home.

3. Customizable

The concealed duct system allows for a high level of customization, as you can field-fabricate plenums using ductboard or attach a pre-made manifold takeoff. This flexibility allows you to create a unique solution for your home's specific needs.

4. Suitable for New Construction or Additions

Concealed duct air handlers are best used in new construction projects or additions, as the installation requires pre-planning and is similar in scope to a standard home HVAC installation. However, the benefits of a concealed duct system are worth the effort.

5. Features

  • 12,000 BTU of heating or cooling
  • Dry and fan modes also available (MACIQ-12FM-HH-MB)
  • Good for a smaller room in most climates
  • Wall-mounted thermostat included

Installation Considerations

Concealed duct system installations require additional supplies such as flex ducting, register vents, plenums, and installation supplies, in addition to the equipment components. The concealed duct units have a factory-installed pump to lift the condensation. From there, you will need to use PVC to construct a drain system to a safe wastewater location.

Overall, concealed duct air handlers provide a discreet and customizable option for heating and cooling your home, with minimal impact on your home's design and aesthetic.

18,000 BTU Concealed Duct ACiQ Mini-Split Air Handler

Benefits of Concealed Duct Air Handlers for Your Home

Concealed duct air handlers offer a discreet and efficient way to cool or heat your home without visible air handlers on your walls or ceilings. These flexible units are designed to be concealed above the ceiling, below the floor, above a closet ceiling, above a hallway ceiling, or behind a soffit. Here are some of the benefits of concealed duct air handlers:

1. Versatility

Concealed duct air handlers can be installed in various locations, giving you more flexibility with your home's design. They are perfect for small bedrooms or a master suite, as up to 4 flex duct runs can be connected, depending on the unit's capacity.

2. Simple Design

Concealed duct air handlers have a simple design that consists of a rear return air inlet and a front supply air outlet. The almost-silent squirrel cage fan pushes the cooled or heated air out of the unit, making it a quiet and efficient option for your home.

3. Customizable

The concealed duct system allows for a high level of customization, as you can field-fabricate plenums using ductboard or attach a pre-made manifold takeoff. This flexibility allows you to create a unique solution for your home's specific needs.

4. Suitable for New Construction or Additions

Concealed duct air handlers are best used in new construction projects or additions, as the installation requires pre-planning and is similar in scope to a standard home HVAC installation. However, the benefits of a concealed duct system are worth the effort.

5. Features

  • 18,000 BTU of heating or cooling
  • Dry and fan modes also available (MACIQ-12FM-HH-MB)
  • Good for a medium room in most climates
  • Wall-mounted thermostat included

Installation Considerations

Concealed duct system installations require additional supplies such as flex ducting, register vents, plenums, and installation supplies, in addition to the equipment components. The concealed duct units have a factory-installed pump to lift the condensation. From there, you will need to use PVC to construct a drain system to a safe wastewater location.

Overall, concealed duct air handlers provide a discreet and customizable option for heating and cooling your home, with minimal impact on your home's design and aesthetic.

24,000 BTU Concealed Duct ACiQ Mini-Split Air Handler

Benefits of Concealed Duct Air Handlers for Your Home

Concealed duct air handlers offer a discreet and efficient way to cool or heat your home without visible air handlers on your walls or ceilings. These flexible units are designed to be concealed above the ceiling, below the floor, above a closet ceiling, above a hallway ceiling, or behind a soffit. Here are some of the benefits of concealed duct air handlers:

1. Versatility

Concealed duct air handlers can be installed in various locations, giving you more flexibility with your home's design. They are perfect for small bedrooms or a master suite, as up to 4 flex duct runs can be connected, depending on the unit's capacity.

2. Simple Design

Concealed duct air handlers have a simple design that consists of a rear return air inlet and a front supply air outlet. The almost-silent squirrel cage fan pushes the cooled or heated air out of the unit, making it a quiet and efficient option for your home.

3. Customizable

The concealed duct system allows for a high level of customization, as you can field-fabricate plenums using ductboard or attach a pre-made manifold takeoff. This flexibility allows you to create a unique solution for your home's specific needs.

4. Suitable for New Construction or Additions

Concealed duct air handlers are best used in new construction projects or additions, as the installation requires pre-planning and is similar in scope to a standard home HVAC installation. However, the benefits of a concealed duct system are worth the effort.

5. Features

  • 24,000 BTU of heating or cooling
  • Dry and fan modes also available (MACIQ-12FM-HH-MB)
  • Good for a medium room in most climates
  • Wall-mounted thermostat included

Installation Considerations

Concealed duct system installations require additional supplies such as flex ducting, register vents, plenums, and installation supplies, in addition to the equipment components. The concealed duct units have a factory-installed pump to lift the condensation. From there, you will need to use PVC to construct a drain system to a safe wastewater location.

Overall, concealed duct air handlers provide a discreet and customizable option for heating and cooling your home, with minimal impact on your home's design and aesthetic.

9,000 BTU Ceiling Cassette ACiQ Mini-Split Air Handler

ACiQ Ceiling Cassette Air Handlers for Discreet and Efficient Cooling and Heating

If you want to enjoy the benefits of a mini split system without having to look at the air handler on your wall, consider the ACIQ-09CC-HH-MB ceiling cassette air handler. It provides high-efficiency heating and cooling, and comes with a handheld remote control for easy temperature adjustments. The ceiling cassette is mounted in the ceiling, with only the grille visible for a discreet appearance and centralized air distribution.

Installation Considerations

Installation of a ceiling cassette air handler requires the creation of a cavity in the ceiling to accommodate the unit. It fits between 24 on-center joists, but modifications to the framing structure may be necessary for 16 on-center joists. The unit also comes with an onboard pump to lift the condensation produced by cooling, which can be lifted up to 14 feet. To safely dispose of the condensation, a PVC drain system is necessary. The refrigerant and wiring connections are the same as those for wall-mounted units.

Features

  • 9,000 BTU of heating or cooling power
  • Dry and fan modes are also available
  • Suitable for small rooms in most climates
  • 4-way air supply for consistent room coverage
  • Handheld remote and wall-mounted thermostat included
  • Decorative grille included for a finished appearance

Upgrade your HVAC system with the discreet and efficient ACIQ-09CC-HH-MB ceiling cassette air handler. With its high-efficiency heating and cooling capabilities and centralized air distribution, it is an ideal option for those who want a more hidden appearance for their air handling unit. Contact us today to learn more about the ACIQ-09CC-HH-MB ceiling cassette air handler and installation options.

12,000 BTU Ceiling Cassette ACiQ Mini-Split Air Handler

ACiQ Ceiling Cassette Air Handlers for Discreet and Efficient Cooling and Heating

If you want to enjoy the benefits of a mini split system without having to look at the air handler on your wall, consider the ACiQ-12CC-HH-MB ceiling cassette air handler. It provides high-efficiency heating and cooling, and comes with a handheld remote control for easy temperature adjustments. The ceiling cassette is mounted in the ceiling, with only the grille visible for a discreet appearance and centralized air distribution.

Installation Considerations

Installation of a ceiling cassette air handler requires the creation of a cavity in the ceiling to accommodate the unit. It fits between 24 on-center joists, but modifications to the framing structure may be necessary for 16 on-center joists. The unit also comes with an onboard pump to lift the condensation produced by cooling, which can be lifted up to 14 feet. To safely dispose of the condensation, a PVC drain system is necessary. The refrigerant and wiring connections are the same as those for wall-mounted units.

Features

  • 12,000 BTU of heating or cooling power
  • Dry and fan modes are also available
  • Suitable for small rooms in most climates
  • 4-way air supply for consistent room coverage
  • Handheld remote and wall-mounted thermostat included
  • Decorative grille included for a finished appearance

Upgrade your HVAC system with the discreet and efficient ACiQ-12CC-HH-MB ceiling cassette air handler. With its high-efficiency heating and cooling capabilities and centralized air distribution, it is an ideal option for those who want a more hidden appearance for their air handling unit. Contact us today to learn more about the ACiQ-12CC-HH-MB ceiling cassette air handler and installation options.

18,000 BTU Ceiling Cassette ACiQ Mini-Split Air Handler

ACiQ Ceiling Cassette Air Handlers for Discreet and Efficient Cooling and Heating

If you want to enjoy the benefits of a mini split system without having to look at the air handler on your wall, consider the ACIQ-18CC-HH-MB ceiling cassette air handler. It provides high-efficiency heating and cooling, and comes with a handheld remote control for easy temperature adjustments. The ceiling cassette is mounted in the ceiling, with only the grille visible for a discreet appearance and centralized air distribution.

Installation Considerations

Installation of a ceiling cassette air handler requires the creation of a cavity in the ceiling to accommodate the unit. It fits between 24 on-center joists, but modifications to the framing structure may be necessary for 16 on-center joists. The unit also comes with an onboard pump to lift the condensation produced by cooling, which can be lifted up to 14 feet. To safely dispose of the condensation, a PVC drain system is necessary. The refrigerant and wiring connections are the same as those for wall-mounted units.

Features

  • 18,000 BTU of heating or cooling power
  • Dry and fan modes are also available
  • Suitable for small rooms in most climates
  • 4-way air supply for consistent room coverage
  • Handheld remote and wall-mounted thermostat included
  • Decorative grille included for a finished appearance

Upgrade your HVAC system with the discreet and efficient ACIQ-18CC-HH-MB ceiling cassette air handler. With its high-efficiency heating and cooling capabilities and centralized air distribution, it is an ideal option for those who want a more hidden appearance for their air handling unit. Contact us today to learn more about the ACIQ-18CC-HH-MB ceiling cassette air handler and installation options.

24,000 BTU Ceiling Cassette ACiQ Mini-Split Air Handler

ACiQ Ceiling Cassette Air Handlers for Discreet and Efficient Cooling and Heating

If you want to enjoy the benefits of a mini split system without having to look at the air handler on your wall, consider the ACIQ-24CC-HH-MB ceiling cassette air handler. It provides high-efficiency heating and cooling, and comes with a handheld remote control for easy temperature adjustments. The ceiling cassette is mounted in the ceiling, with only the grille visible for a discreet appearance and centralized air distribution.

Installation Considerations

Installation of a ceiling cassette air handler requires the creation of a cavity in the ceiling to accommodate the unit. It fits between 24 on-center joists, but modifications to the framing structure may be necessary for 16 on-center joists. The unit also comes with an onboard pump to lift the condensation produced by cooling, which can be lifted up to 14 feet. To safely dispose of the condensation, a PVC drain system is necessary. The refrigerant and wiring connections are the same as those for wall-mounted units.

Features

  • 24,000 BTU of heating or cooling power
  • Dry and fan modes are also available
  • Suitable for small rooms in most climates
  • 4-way air supply for consistent room coverage
  • Handheld remote and wall-mounted thermostat included
  • Decorative grille included for a finished appearance

Upgrade your HVAC system with the discreet and efficient ACIQ-24CC-HH-MB ceiling cassette air handler. With its high-efficiency heating and cooling capabilities and centralized air distribution, it is an ideal option for those who want a more hidden appearance for their air handling unit. Contact us today to learn more about the ACIQ-18CC-HH-MB ceiling cassette air handler and installation options.

6,000/9,000 BTU Slim Ceiling Cassette ACiQ Mini Split Air Handler

Slim Ceiling Cassettes give you the advantages of a traditional cassette, but in a slimmer profile designed to fit between 16”-on-center joists. This means an easier installation in many cases.

Slim Ceiling Cassettes have a one-way air delivery, taking in return air along one edge and delivering conditioned air out the other. Traditional ceiling cassettes send conditioned air out in 4 directions and take return air in at the center.

Slim Ceiling Cassette air handlers provide the same high-efficiency heating and cooling of a regular wall-mounted unit and come with a hand-held remote control. Once mounted in the ceiling, only the grille is visible for the most understated appearance.

Switchable Sizing

  • ACiQ-SCC0609 – 9,000 BTU default, switchable to 6,000 BTU by changing the dip switch

Installation Considerations

Slim Ceiling Cassettes are flush-mounted, which requires removal of enough ceiling material to create a cavity for the unit. The Slim Ceiling cassette is designed to fit between 16” on center joists, and the narrow profile means no changes to your framing will be required in most cases. Additionally, Ceiling Cassettes have factory-installed, onboard condensate pumps to lift the condensation up to 14 inches. From there, it will be necessary to construct a PVC drain system to route the condensation to a safe wastewater location. Refrigerant and wiring connections are the same as the wall mounted units.

FEATURES

  • Narrow profile fits between 16 inch-on-center joists
  • Switchable size – select between 6,000 BTU and 9,000 BTU
  • No-ladder filter cleaning – grille lowers on cables for easy access to filter
  • Handheld remote included
  • Decorative Grille included
12,000/18,000 BTU Slim Ceiling Cassette ACiQ Mini Split Air Handler

Slim Ceiling Cassettes give you the advantages of a traditional cassette, but in a slimmer profile designed to fit between 16”-on-center joists. This means an easier installation in many cases.

Slim Ceiling Cassettes have a one-way air delivery, taking in return air along one edge and delivering conditioned air out the other. Traditional ceiling cassettes send conditioned air out in 4 directions and take return air in at the center.

Slim Ceiling Cassette air handlers provide the same high-efficiency heating and cooling of a regular wall-mounted unit and come with a hand-held remote control. Once mounted in the ceiling, only the grille is visible for the most understated appearance.

Switchable Sizing

  • ACiQ-SCC1218 – 18,000 BTU default, switchable to 12,000 BTU by changing the dip switch

Installation Considerations

Slim Ceiling Cassettes are flush-mounted, which requires removal of enough ceiling material to create a cavity for the unit. The Slim Ceiling cassette is designed to fit between 16” on center joists, and the narrow profile means no changes to your framing will be required in most cases. Additionally, Ceiling Cassettes have factory-installed, onboard condensate pumps to lift the condensation up to 14 inches. From there, it will be necessary to construct a PVC drain system to route the condensation to a safe wastewater location. Refrigerant and wiring connections are the same as the wall mounted units.

FEATURES

  • Narrow profile fits between 16 inch-on-center joists
  • Switchable size – select between 12,000 BTU and 18,000 BTU
  • No-ladder filter cleaning – grille lowers on cables for easy access to filter
  • Handheld remote included
  • Decorative Grille included
18,000 BTU ACiQ Multi Zone Ducted Air Handler

Description

The Ductless Multi Zone air handlers seamlessly connect to your existing ductwork, allowing you to combine ducted heating and cooling with traditional mini split air handlers. This comprehensive system, powered by a single outside condenser, ensures maximum comfort, energy efficiency, and zoned control for independent temperature regulation in different areas of your home. The indoor units draw power from the outdoor condenser, eliminating the need for additional circuits unless you choose to install optional electric backup heat. These air handlers are particularly suitable for homes that have existing ductwork in some areas but lack it in others, such as finished basements, attics, or additions.

Features

  • 18,000 BTU, 1.5 Ton central ducted air handler
  • Matches with Multi Zone and Platinum Single Zone condensers
  • Can be used as part of a Multi Zone system with other air handlers
  • Variable DC blower
  • Upflow, downflow, horizontal left or right
  • Manufactured home and mobile home approved
  • Wired controller included, with remote control for setup
  • Can be wired to 24V thermostats - see Quick Start Guide below
  • Wifi compatible with optional KJR-120N controller
24,000 BTU ACiQ Multi Zone Ducted Air Handler

Description

Ductless Multi Zone air handlers seamlessly connect to your existing ductwork, allowing you to combine ducted heating and cooling with traditional mini split air handlers. This comprehensive system, powered by a single outside condenser, ensures maximum comfort, energy efficiency, and zoned control for independent temperature regulation in different areas of your home. The indoor units draw power from the outdoor condenser, eliminating the need for additional circuits unless you choose to install optional electric backup heat. These air handlers are particularly suitable for homes that have existing ductwork in some areas but lack it in others, such as finished basements, attics, or additions.

Features

  • 24,000 BTU, 2 Ton central ducted air handler
  • Matches with Multi Zone and Platinum Single Zone condensers
  • Can be used as part of a Multi Zone system with other air handlers
  • Variable DC blower
  • Upflow, downflow, horizontal left or right
  • Manufactured home and mobile home approved
  • Wired controller included, with remote control for setup
  • Can be wired to 24V thermostats - see Quick Start Guide below
  • Wifi compatible with optional KJR-120N controller
30,000 BTU ACiQ Multi Zone Ducted Air Handler

Description

The 30,000 BTU (2.5 Ton)Choose Ducted Multi Zone when you need to create a system with a central, ducted air handler plus other wall mounts, ceiling cassettes, concealed duct or ceiling/ floor units. You can even create a zoned system with two separately controlled air handlers connected to a single condenser outside. Connections are made just as with mini split style air handlers – with the indoor unit getting power from the outdoor component. You only need a separate circuit for optional backup electric heat. This air handler also matches to Platinum Series Single Zone condensers. The unit comes with an included wall-mount controller, and a remote control for use during setup. Now you can create the perfect system using a combination of ducted and ductless air handlers, all while enjoying the maximum comfort and savings of ACiQ.

Features

  • 30,000 BTU, 2.5 Ton central ducted air handler
  • Wired controller included, with remote control for setup
  • Matches with Multi Zone and Platinum Single Zone condensers
  • Can be used as part of a Multi Zone system with other air handlers
  • Variable DC blower
  • Upflow, downflow, horizontal left or right
  • Manufactured home and mobile home approved
36,000 BTU ACiQ Multi Zone Ducted Air Handler

Description

The 36,000 BTU (3.0 Ton)Choose Ducted Multi Zone when you need to create a system with a central, ducted air handler plus other wall mounts, ceiling cassettes, concealed duct or ceiling/ floor units. You can even create a zoned system with two separately controlled air handlers connected to a single condenser outside. Connections are made just as with mini split style air handlers – with the indoor unit getting power from the outdoor component. You only need a separate circuit for optional backup electric heat. This air handler also matches to Platinum Series Single Zone condensers. The unit comes with an included wall-mount controller, and a remote control for use during setup. Now you can create the perfect system using a combination of ducted and ductless air handlers, all while enjoying the maximum comfort and savings of ACiQ.

Features

  • 36,000 BTU, 3.0 Ton central ducted air handler
  • Wired controller included, with remote control for setup
  • Matches with Multi Zone and Platinum Single Zone condensers
  • Can be used as part of a Multi Zone system with other air handlers
  • Variable DC blower
  • Upflow, downflow, horizontal left or right
  • Manufactured home and mobile home approved
Diversitech E Lite Equipment Pad 18" x 38" x 3"

E Liteis a plastic pad designed as a mounting base for air conditioning condensers. The rugged design provides uniform and generous ribbing for optimum, self-leveling ground support without inserts. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but not too light. A subtle texture prevents unit slide and presents a classic appearance, which is enhanced by rounded edges and a concrete gray color. Each pad is molded with its size in raised letters.

  • High recycled plastic content
  • Subtle texture resists unit slide
  • Unaffected by UV or weather
  • Uniform ribbing transfers load evenly
  • Drillable for securing unit
  • Lightweight, yet rugged
Wall Mount Bracket for Condensers 30"

This Diversitech wall mount bracket is perfect for outdoor condensers. The length of the the wall bracket arms are 30" long. The condensing unit is mounted onto the L-shaped brackets.

Features:

  • Steel: 10 GA
  • Powder-coated grey Finish
  • Load rating: 600 lbs per pair
  • Holes will accommodate anchors for installation
  • Warranty: 1 year
  • ACB line of wall brackets are approved by the Florida Building Commission and are High Velocity Hurricane Zone (HVHZ) approved. (See product certification documentation for complete details.)
Diversitech E Lite Equipment Pad and Risers Kit 18" x 38" x 3"

E Lite Condenser Pad and Risers

E Lite Condenser Pad

E Lite Condenser Pad is designed to provide solid support for air conditioning condensers. It's made from sturdy polypropylene, striking a balance between lightness and stability. Its robust design ensures a level ground without the need for extra components.

Key Features:

  • Reliable Support: Abundance of ridges for stable ground support.
  • Durable and Lightweight: Tough yet not excessively heavy, thanks to polypropylene construction.
  • Anti-Slip: The surface prevents slipping, and rounded edges enhance safety.
  • Simple Appearance: Gray color with size labels.
  • Versatile Use: Suitable for condensers, pipes, ducts, cables, and more.

E Lite Risers

E Lite Risers complement the Condenser Pad, allowing you to adjust your setup as needed. They are constructed from weather-resistant PVC for outdoor use.

Key Features:

  • Weather Resistance: Made from tough PVC for long-lasting performance.
  • Secure Setup: The track securely holds bolts in place.
  • Bolts Included: Each set comes with two bolts.
  • Strong Support: Capable of handling loads of up to 397 pounds.

E Lite Condenser Pad and Risers offer reliable support without any complications. They are built to last and deliver efficient performance. Consider E Lite for your support needs – it's a practical solution for your projects.

Product Specifications

More Information
ACIQ Tri Zone Mini Split System - Design Your Own
SKUACIQ Tri Zone
ManufacturerACiQ
RefrigerantR410A
Warranty12 year compressor, 7 year parts with online registration

Reviews 24

Write Your Own Review
You're reviewing:ACIQ Tri Zone Mini Split System - Design Your Own
Your Rating

Questions and Answers

Customer Questions
Who makes ACiQ?
ACiQ is made by one of the largest HVAC manufacturers in the world. With 150,000 employees in over 195 countries, their products improve the lives of millions of people around the globe. Their manufacturing is state of the art, with robotic assembly and computer assisted quality control. ACiQ has an extremely low rate of warranty return. With the features, performance and price it's the best value you can get on a mini split.
Is ACiQ better than Mitsubishi?
Mitsubishi makes great equipment, certainly. They were first to sell mini splits in the US, and they have a solid reputation. Yet ACiQ has higher SEER ratings, longer warranty, and extreme weather performance all the way down to -22! You can spend more on a mini split, but you can't get better value.
Who owns ACiQ?
1HVAC Energy is part of a family of companies with 80 years in the industry and a long reputation of putting customers first. They own ACiQ as well as a number of other quality brands.
Did you find what you were looking for?