3 Ton 14 SEER 80% AFUE 100,000 BTU Goodman Gas Furnace and Air Conditioner System - Horizontal

The Goodman® GME8 80% AFUE Two-Stage (Convertible), Multi-Speed, Multi-Position Gas Furnace features a super-efficient X13 blower motor that saves electricity during the heating and cooling months. This new direct current motor uses less electricity than the standard multi-speed furnace blower. For example, in constant-fan mode, the X13 runs on an average of 110 watts, whereas a standard furnace multi-speed blower uses an average of 360 watts. This efficiency furnace also includes a patented aluminized-steel tubular heat exchanger and durable Silicon Nitride Hot Surface Ignition system. This Goodman gas furnace is run-tested for heating or combination heating/cooling applications. With a heavy-gauge, reinforced, insulated steel cabinet and durable baked enamel finish, this unit can be installed in a variety of locations. 

Standard Furnace Features

• Operates as a natural gas furnace out of the box, and can be easily converted to a propane furnace with optional propane conversion kit.
• X13 blower motor with brushless DC design and a permanent-magnet rotor which allows much more efficient operation furnace in both heating and cooling months
• Patented TuffTube™ dual-diameter tubular furnace heat exchanger with lifetime limited warranty plus 10-year furnace replacement limited warranty (with online registration)
• Heater's Two-stage gas valve with revolutionary new Dual$aver control technology allows installer to turn on two-stage operation with the flip of a dipswitch
• Goodman Silicon Nitride igniter with patented adaptive learning routine for maximum igniter life
• Integrated furnace electronic furnace control board with self-diagnostics, low-voltage terminal block, and separate terminals for electronic air cleaner and 24-volt humidifiers
• Goodman has furnace control board stores the last five diagnostic codes in memory; simple push-button activation outputs the fault history to a flashing red LED
• Low constant fan mode allows the homeowner to activate the lowest available heating speed to circulate air quietly and efficiently throughout the home during the off cycle
• Furnaces' self-adjusting feature automatically adjusts furnace to high or low stage based on outsidetemperature without outdoor temperature sensor
• Quiet single-speed, induced-draft blower
• Complies with California NOx emissions standards

The Goodman® GSX14 14 SEER Central Air Conditioner uses the environmentally friendly refrigerant R-410A and features operating sound levels that are among the best in the heating and air conditioning industry. R-410A is chlorine-free to help prevent damage to the ozone layer. The GSX14 central air conditioner features a high-efficiency Copeland® scroll compressor and is designed for the consumer who desires superior comfort, quiet operation, and environmentally friendly cooling performance.

This central air unit can be 14 or 15 SEER depending on which indoor unit it is paired with. If it is installed with the manufacturer-recommended evaporator coil, variable speed furnace, variable speed air handler, or variable speed modular blower, and also sometimes a thermostatic expansion valve (TXV), it is a 15 SEER system (see Accessories tab above for actual products compatible with this central air conditioner, or the Documents tab above for Goodman's spec sheet details). A 15 SEER central air conditioning system will reduce your electric bill approximately 7% more than a 14 SEER system.

Some models of the Goodman condensers include an orifice (also called "flow rater" or "piston") in a small bag taped to the side of the condenser. If the condenser you purchase includes this orifice, you will need to replace the orifice already inside the evaporator coil or air handler you purchase with this orifice included with the condenser. Doing so makes the condenser and evaporator coil compatible. You can viewthis step-by-step guide to see how to easily change the orifice.

Please note that this equipment comes precharged with R-410A liquid refrigerant, and by Federal law cannot be released to the atmosphere. You can purchase this equipment without being certified, and if you are mechanically inclined you can perform about 90% of the equipment installation yourself. However, you must have a professional heating/cooling contractor do the final part of the installation which requires managing the refrigerant.

Central Air Conditioner's Standard Features

• Energy-efficient Copeland® scroll compressor
• Factory-installed filter drier
• Copper tube/aluminum fin coil
• Service valves with sweat connections and easy-access gauge ports
• Contactor with lug connection
• Ground lug connection
• AHRI Certified
• ETL Listed

Cabinet Features

• Goodman® brand louvered sound control top design
• Steel louver coil guard
• Heavy-gauge galvanized-steel cabinet
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Top and side maintenance access
• Single-panel access to controls with space provided for field-installed accessories
• When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane-type winds