5 Ton 15.5 SEER Goodman Heat Pump Variable Speed Air Conditioner System - Horizontal

OVERVIEW

The Goodman CHPF4860D6 evaporator coil is designed for any installations that the coil needs to sit on its side, in the horizontal position. With its enhanced comfort and superior efficiency design, the CHPF4860D6 is an inexpensive yet quality choice for you.

QUICK FACTS

• 4 to 5 ton evaporator coil
• Installable in the horizontal configuration
• Usable with either a heat pump or an AC-only condenser
• Works with R410A or R22 refrigerant
• Low air leakage
• Check flowrater expansion device for use in any application

4 to 5 Tons

At an output of 4 to 5 tons, the Goodman CHPF4860D6 evaporator coil is ready for almost any horizontal installation at that size. In many situations, a condenser that is paired with the condenser is going to be smaller than this coil. This is intentional and is to maintain the overall unit’s efficiency.
Please note that for this coil to function, a furnace or blower and a condenser is required, all sold separately. This coil is not designed to replace a coil in a single-piece air handler.

Warranty

The CHPF4860D6 coil is covered under Goodman’s standard 10 year parts warranty when the unit is installed following your state and local codes, the coil is paired with a compatible R410A condenser, and the entire system is registered online through the manufacturer.

The Goodman CHPF4860D6 evaporator coil is designed with a durable outer casing and a rust-resistant drain pan to lower general wear and tear to make sure the coil works for years to come. To ease installation, the unit is designed to be slim and able to fit in many crawl spaces and attics, and with its foil-face insulation making the unit’s air leakage minimal, installation location does not necessarily have to be insulated for normal temperature operations. For maintenance, the coil has a split-seam on the front of it for easier access.

OVERVIEW

The Goodman MBVC2000AA-1 is a variable speed modular blower designed for heating in more compact spaces. Designed to work alone as a straight electric furnace or to work with an AC or heat pump system, the MBVC2000AA-1 is an energy efficient choice that is compatible with ComfortNet communicating technology, all providing an enhanced comfort to your home.

QUICK FACTS

• 4 to 5 ton modular blower
• Electric heat compatible, available at an additional cost
• Efficient variable speed blower
• Multi-positional (upflow, downflow, or horizontal)

4 to 5 Tons

The Goodman MBVC2000AA-1 modular blower has an output that is rated to match up to a 4 to 5 ton system. Although not always the case, in order for a paired air conditioning or heat pump system to function at peak heating and cooling efficiency, ideal system configurations will have the coil within the range of this modular blower. Please note that in order for the modular blower to provide straight electric heating, a compatible electric heat kit is required, available to be field-installed at an additional cost.

Warranty

Goodman offers a 12 year parts warranty on their variable speed modular blowers when your installation that follows your state and local codes. Please note that in order for the warranty to be upheld, you must register the unit online through the manufacturer.

The Goodman MBVC2000AA-1 modular blower is designed to be flexible in installation application. With its small form factor and ability to work with a separate AC or heat pump coil, the unit is easily installable. For durability, there is foil-faced insulation inside the cabinet, and the outer casing is constructed from strong galvanized steel.

The Goodman MBVC2000AA-1 uses a variable speed ECM blower motor, providing precise adjustments to keep your home’s temperature as stable as possible. The unit is also compatible with ComfortNet communicating equipment, and with paired with it, temperature control, efficiency, and overall comfort are enhanced even further. Either way, the MBVC2000AA-1 lives up to the Goodman name.

Goodman's TXV valves are designed to improve the reliability and efficiency of your central split system. With the TX5N4, you can be assured that your three-and-a-half to five ton system is getting the proper refrigerant flow, even through changing conditions. Since this valve is installed externally, it is easy to service and maintain. If you're looking to improve the efficiency and performance of your system, the TX5N4 is a good start.

Product Compatible With

• Goodman GSX130421 Air Conditioners
• Goodman GSX130481 Air Conditioners
• Goodman GSX130601 Air Conditioners
• Goodman GSX130611 Air Conditioners
• Goodman DSXC160481 Air Conditioners
• Goodman DSXC160601 Air Conditioners
• Goodman DSXC160481 Air Conditioners
• Goodman DSXC160601 Air Conditioners
• Goodman GSZ130421 Heat Pumps
• Goodman GSZ130481 Heat Pumps
• Goodman GSZ130601 Heat Pumps
• Goodman SSZ140421 Heat Pumps
• Goodman SSZ140481 Heat Pumps
• Goodman SSZ140601 Heat Pumps
• Goodman SSZ160421 Heat Pumps
• Goodman SSZ160481 Heat Pumps
• Goodman SSZ160601 Heat Pumps
• Goodman DSZC160481 Heat Pumps
• Goodman DSZC160601 Heat Pumps
• Goodman DSZC180481 Heat Pumps
• Goodman DSZC180601 Heat Pumps
• Goodman CAPF3642*6 Evaporator Coils
• Goodman CAUF3642*6 Evaporator Coils
• Goodman CHPF3642B6 Evaporator Coils
• Goodman CSCF3642N6 Evaporator Coils

Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.

Liquidtite 3/4 in. x 4 ft. AC Whip comes with 2 non-metallic and liquid-tight connectors and features 3 conductors in black, red and green.

• Black, red and green THHN/THWN conductors
• 1 straight non-metallic liquid-tight connector and 1 90-degree non-metallic liquid-tight connector
• 4 ft. length
• Pre-assembled in 3/4 in. trade size
• Made in USA

E Liteis a plastic pad designed as a mounting base for air conditioning condensers. The rugged design provides uniform and generous ribbing for optimum, self-leveling ground support without inserts. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but not too light. A subtle texture prevents unit slide and presents a classic appearance, which is enhanced by rounded edges and a concrete gray color. Each pad is molded with its size in raised letters.

• High recycled plastic content
• Subtle texture resists unit slide
• Unaffected by UV or weather
• Uniform ribbing transfers load evenly
• Drillable for securing unit
• Lightweight, yet rugged