20,000 BTU 16 SEER Mitsubishi Dual Zone Mini Split Heat Pump System 12+12 - Ceiling Cassette-R410A

Mitsubishi MXZ-2C20NA2 Multi Zone Heat Pump Condenser

Overview

The Mitsubishi MXZ-2C20NA2 is a heat pump condenser designed for use in multi-zone system setups. Instead of using multiple single zone condensers, which can take up a lot of space in your yard, a multi-zone unit is more practical in many applications, as it requires only one air handler per room that you are trying to heat and cool.

Features

• 20,000 BTU multi-zone heat pump condenser
• Variable speed inverter-driven compressor
• Quiet operation
• Supports enhanced comfort down to -4°F

20,000 BTU

The Mitsubishi MXZ-2C20NA2 is rated at 20,000 BTU, which should generally be the same or greater than the total BTU count across all air handlers that this unit is paired with. While a certified pairing may have a higher BTU count total, the condenser can handle more, but anything higher than this rating can potentially lower the speed that the unit can heat and cool. It can also limit the functional outputs of each air handler if they are all running at the same time.

Please note: This heat pump condenser must be installed with compatible air handlers, controllers, and other installation equipment, available at an additional cost, to function.

Warranty

Mitsubishi offers a 5-year parts and 7-year compressor warranty on all of its products. If the unit is registered online through the manufacturer after installation that follows your state and local codes, the warranty is upgraded to a 10-year parts and compressor warranty.

Enhanced Comfort

With its variable speed compressor, the MXZ-2C20NA2 can provide more precise adjustments to the covered spaces with the right air handlers. This also slightly improves electrical efficiency by ramping the compressor up and down based on the unit’s air handlers’ needs, as well as providing a more stable temperature output from the connected air handlers to provide superior comfort.

Intelligent Control

For ease of control, many air handlers that are compatible with the MXZ-2C20NA2 can use any Mitsubishi-brand thermostat or adapter. The most convenient to control is the Kumo cloud WiFi adapter, found here, which allows each air handler to be accessed from anywhere that you have internet. Please note that in most applications, you will need one thermostat or adapter per indoor air handler that you want to control with it.

The Mitsubishi MHK2 is the second revision of Mitsubishi's popular wireless controller set designed for use with M & P Series residential and light commercial units. This controller provides comprehensive 7-day scheduling and a clear, backlit display for easy use.

With the updated MHK2, you can now use the Kumo Cloud wi-fi adapter (sold separately) alongside the wireless controller. You no longer have to choose between internet and wireless control--you can have both!

Components

The MRCH2 is the main body of the thermostat, which can be placed up to 200 feet away from the indoor unit without requiring line of sight. The MRC2 cable connects to the CN105 connector on the indoor unit's control board, and the other end of the cable connects to the MIFH2 receiver. The MIFH2 receiver can be placed on the right side of a wall-mounted unit, in the pocket of an MLZ-KP cassette, or anywhere near the control side of a ducted or square cassette unit.

Features

• Includes MRCH2 thermostat, MIFH2 wireless receiver, and MRC2 cable
• Backlit display for easy viewing
• Can sense temperature at the indoor unit (default) or at the controller
• Supports both Fahrenheit and Celsius temperature scales
• No batteries required
• Compatible with both single-zone and multi-zone systems
• Offers language options in English, French, and Spanish

Compatible Indoor Units:

Wall Mounted

• GL Series: MSZ-GL06NA-U1, MSZ-GL09NA-U1, MSZ-GL12NA-U1, MSZ-GL15NA-U1, MSZ-GL18NA-U1, MSZ-GL24NA-U1, MSY-GL09NA-U1, MSY-GL12NA-U1, MSY-GL15NA-U1, MSY-GL18NA-U1, MSY-GL24NA-U1
• FH Series: MSZ-FH06NA, MSZ-FH09NA, MSZ-FH12NA, MSZ-FH15NA, MSZ-FH18NA2
• EF Series: MSZ-EF09NAB-U1, MSZ-EF09NAS-U1, MSZ-EF09NAW-U1, MSZ-EF12NAB-U1, MSZ-EF12NAS-U1, MSZ-EF12NAW-U1, MSZ-EF15NAB-U1, MSZ-EF15NAS-U1, MSZ-EF15NAW-U1, MSZ-EF18NAB-U1, MSZ-EF18NAS-U1, MSZ-EF18NAW-U1
• JP Series: MSZ-JP09WA-U1, MSZ-JP12WA-U1
• WR Series: MSZ-WR09NA-U1, MSZ-WR12NA-U1, MSZ-WR18NA-U1, MSZ-WR24NA-U1
• D Series: MSZ-D30NA-8, MSZ-D36NA-8, MSY-D30NA-8, MSY-D36NA-8
• P Series: PKA-A12HA7, PKA-A18HA7,PKA-A24KA7, PKA-A30KA7, PKA-A36KA7

Ducted

• KD Series: SEZ-KD09NA4R1.TH, SEZ-KD12NA4R1.TH, SEZ-KD15NA4R1.TH, SEZ-KD18NA4R1.TH
• P Series: PEAD-A09AA7, PEAD-A12AA7, PEAD-A15AA7, PEAD-A18AA7, PEAD-A24AA7, PEAD-A30AA7, PEAD-A36AA7, PEAD-A42AA7

Ceiling Cassette

• KF Series: SLZ-KF09NA, SLZ-KF12NA, SLZ-KF15NA, SLZ-KF18NA
• KP Series: MLZ-KP09NA, MLZ-KP12NA, MLZ-KP18NA
• P Series: PLA-A12EA7, PLA-A18EA7, PLA-A24EA7, PLA-A30EA7, PLA-A36EA7, PLA-A42EA7

Floor Mounted

• MFZ-KJ09NA-U1, MFZ-KJ12NA-U1, MFZ-KJ15NA-U1, MFZ-KJ18NA-U1

Multi Position Air Handler

• KP: SVZ-KP12NA, SVZ-KP18NA, SVZ-KP24NA, SVZ-KP30NA, SVZ-KP36NA
• P Series: PVA-A12AA7, PVA-A18AA7, PVA-A24AA7, PVA-A30AA7, PVA-A36AA7, PVA-A42AA7

Ceiling Suspended

• P Series: PCA-A24KA7, PCA-A30KA7, PCA-A36KA7, PCA-A42KA7

The Mitsubishi SLP-18FAU is a grille option designed for use with the KF series cassettes to provide a sleek and seamless appearance. This standard grille option is an essential component for completing the installation of the cassette unit.

Features:

• Overlaps a 2' x 2' ceiling tile to hide indoor unit from view.

Compatible Indoor Units:

Ceiling Cassette

• KF Series: SLZ-KF09NA, SLZ-KF12NA, SLZ-KF15NA, SLZ-KF18NA

This wall mount bracket is perfect for outdoor mini split condensers. The length of the the wall bracket arms are 23" long. The condensing unit is mounted onto the L-shaped brackets and fastened using the bolts and anti-vibration washers provided.

• 23" Arm Length
Weight capacity of 220 lbs per arm
• Bolts and anti-vibration washers included

Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends, length 15 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends, length 25 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends, length 30 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends, length 35 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends, length 50 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends