1-888-485-0777
Today's Hours 10am - 6pm est
Â
The Mitsubishi MXZ-2C20NAHZ2 is a heat pump condenser designed for use in multi-zone systems. It is an efficient and practical option for applications where multiple single-zone condensers would take up too much space in the yard. This unit can keep you warm even during the coldest months of the year, thanks to its integrated drain pan heater and Hyper Heat technology.
The Mitsubishi MXZ-2C20NAHZ2 is rated to handle up to 20,000 BTU. This is generally sufficient to accommodate the total BTU count across all air handlers that this unit is paired with. However, in some cases, a certified pairing may have a higher BTU count total than this condenser's rating. It is important to note that this unit must be installed with compatible air handlers, controllers, and other installation equipment, which are available at an additional cost.
Please keep in mind that exceeding the BTU rating of the condenser can potentially lower the speed at which the unit can heat and cool. It can also limit the functional outputs of each air handler if they are all running at the same time.
Mitsubishi offers a 5-year parts and 7-year compressor warranty on all of its products. When the unit is registered online through the manufacturer after installation that follows your state and local codes, the warranty is upgraded to a 10-year parts and compressor warranty.
The variable speed compressor of the MXZ-2C20NAHZ2 allows for more precise adjustments to the covered spaces when paired with the right air handlers. This also slightly improves electrical efficiency by ramping the compressor up and down based on the unit's air handlers' needs, as well as providing a more stable temperature output from the connected air handlers to provide superior comfort.
For ease of control, many air handlers that are compatible with the MXZ-2C20NAHZ2 can use any Mitsubishi-brand thermostat or adapter. The most convenient option is the Kumo cloud WiFi adapter, which allows each air handler to be accessed from anywhere with an internet connection. Please note that in most applications, you will need one thermostat or adapter per indoor air handler that you want to control.
The Mitsubishi MSZ-GL06NA air handler is an efficient heating and cooling solution designed for small rooms. Please note that installation requires additional equipment, including a condenser, which is available at an additional cost.
The I-SEE sensor technology in the MSZ-GL06NA air handler allows for improved temperature control by reading the temperature from multiple directions and directing airflow where it is needed most. This reduces the unit's runtime and helps to maintain a constant temperature. Additionally, the unit has a high dehumidification rate, making it an ideal solution for humid climates. With an enhanced filtration system, the air handler can help improve the air quality in the room.
E Lite Condenser Pad is designed to provide solid support for air conditioning condensers. It's made from sturdy polypropylene, striking a balance between lightness and stability. Its robust design ensures a level ground without the need for extra components.
E Lite Risers complement the Condenser Pad, allowing you to adjust your setup as needed. They are constructed from weather-resistant PVC for outdoor use.
E Lite Condenser Pad and Risers offer reliable support without any complications. They are built to last and deliver efficient performance. Consider E Lite for your support needs – it's a practical solution for your projects.
22,000 BTU Mitsubishi Multi-Zone Ductless H2i Hyper Heat Pump Condenser w/ Base Pan Heater | |
---|---|
SKU | MXZ-2C20NAHZ2 |
Weight | 190.000000 |
Manufacturer | Mitsubishi |
Cooling BTU | 20,000 BTU |
Heating BTU | 22,000 BTU |
Refrigerant | R410A |
SEER | 16-17 |
Liquid Line | 1/4" |
Suction Line | 3/8" |
Electrical | 230 V. 1 Phase 60 Hz |
Max Breaker Size | 40 amps |
Min. Breaker Size | 29.5 amps |
Amperage Requirement | 40 amps |
Height | 41" |
Width | 37" |
Depth | 13" |
Warranty | Limited warranty: five years parts and seven years compressors |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
6,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone GL - Air Handler | |
SKU | MSZ-GL06NA |
Weight | 26.000000 |
Manufacturer | Mitsubishi |
Controller | Wireless Included |
Additional Information | Drain: 5/8" |
Cooling BTU | 6,000 BTU |
Heating BTU | 7,200 BTU |
Maximum CFM | 109-406 CFM |
Decibel Level (dBA) | 19-43 |
Refrigerant | R410A |
Capacity | Dehumidification Rate: 0.23 gal/hr |
Liquid Line | 1/4" |
Suction Line | 3/8" |
Electrical | 208/230v 1 Phase 60 Hz |
BTU/Tonnage | 6,000 BTU/0.5 Ton |
Mini-Split Type | Wall Mounted |
Zone Compatibility | Multi Zone |
Operating Mode | Cooling, Heating |
Height | 11-5/8" |
Width | 31-7/16" |
Depth | 9-1/8" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
Diversitech E Lite Equipment Pad and Risers Kit 18" x 38" x 3" | |
SKU | 87762 / EL1838-3 |
Weight | 25.000000 |
Manufacturer | Online Supply |
Height | 3" |
Width | 18" |
Depth | 38" |
Safety Information | PROPOSITION 65 WARNING |