1-888-485-0777
Today's Hours 10am - 6pm est
Â
If you're looking for an efficient and cost-effective air handler to keep your home comfortable, the Mitsubishi MSZ-GL18NA air handler is a great option. However, it's important to note that to operate properly, this air handler must be installed with a condenser and other installation equipment which are available at an additional cost.
The Mitsubishi MSZ-GL18NA air handler can function as a single zone system or as part of a multi-zone setup, making it a versatile option for various applications. It's part of Mitsubishi's standard air handler series, which means it's an economical choice for efficient home comfort. Whether you're using a cooling-only or heat pump condenser, this air handler can work in almost any basic configuration and application. Plus, it has the ability to ramp up and down based on the thermostat's needs, along with an automated vertical air swing adjustment system to direct the airflow where it's needed, keeping you comfortable year-round with the right condenser.
Investing in the Mitsubishi MSZ-GL18NA air handler is a smart choice if you want to enjoy energy-efficient and cost-effective home comfort. Just remember that you need to purchase additional installation equipment, including a condenser, for it to function properly.
The Mitsubishi MXZ-SM36NAMHZ-U1 is a multi-zone heat pump condenser that is ideal for setups where multiple air handlers are needed to heat and cool different rooms. This unit has an integrated drain pan heater and can operate in temperatures as low as -13°F, making it suitable for use in cold climates.
The MXZ-SM36NAMHZ-U1 is a powerful heat pump condenser with a 36,000 BTU rating. This means that it can handle a total BTU count equal to or greater than the total BTU count of all the air handlers it is paired with. Certified pairings may have a higher BTU count, but exceeding the unit's rating can impact its efficiency.
The unit's variable speed compressor provides quiet operation and precise temperature control. It ramps up and down based on the air handlers' needs, which improves its electrical efficiency and provides enhanced comfort.
The MXZ-SM36NAMHZ-U1 is equipped with Hyper Heat technology, which supports enhanced comfort even in temperatures as low as -13°F.
To function properly, this unit requires at least one branch box, which enables it to connect to multiple air handlers.
Mitsubishi offers a 5-year parts and 7-year compressor warranty on all its products. Registering the unit online after installation and complying with state and local codes upgrades the warranty to a 10-year parts and compressor warranty.
As the unit has only one set of line set ports, it requires a branch box to connect to multiple air handlers. This unit also requires air handlers, controllers, and other installation equipment, which are available at an additional cost.
The unit's variable speed compressor and precise temperature control provide superior comfort. It ensures that each air handler's functional outputs remain stable even when multiple air handlers are running simultaneously.
Mitsubishi-brand thermostats or adapters can control most air handlers that are compatible with the MXZ-SM36NAMHZ-U1. The Kumo cloud WiFi adapter is the most convenient to control, providing access to each air handler from anywhere with an internet connection. Please note that one thermostat or adapter is needed per indoor air handler that needs control access.
The Mitsubishi MSZ-GL09NA air handler is an efficient heating and cooling solution designed for small rooms. Please note that installation requires additional equipment, including a condenser, which is available at an additional cost.
The I-SEE sensor technology in the MSZ-GL09NA air handler allows for improved temperature control by reading the temperature from multiple directions and directing airflow where it is needed most. This reduces the unit's runtime and helps to maintain a constant temperature. Additionally, the unit has a high dehumidification rate, making it an ideal solution for humid climates. With an enhanced filtration system, the air handler can help improve the air quality in the room.
18,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone GL - Air Handler | |
---|---|
SKU | MSZ-GL18NA |
Weight (in lbs) | 33.000000 |
Brand/Manufacturer | Mitsubishi |
Controller | Wireless Included |
Additional Information | Drain: 5/8" |
Cooling BTU | 18,000 BTU |
Heating BTU | 21,600 BTU |
Maximum CFM | 297-646 CFM |
Decibel Level (dBA) | 28-49 |
Refrigerant | R410A |
Capacity | Dehumidification Rate: 0.32 gal/hr |
Liquid Line | 1/4" |
Suction Line | 1/2" |
Electrical | 208/230v 1 Phase 60 Hz |
Phase | Single Phase |
BTU/Tonnage | 18,000 BTU/1.5 Ton |
Mini-Split Type | Wall Mounted |
Zone Compatibility | Multi Zone |
Operating Mode | Cooling, Heating |
Height | 12-13/16" |
Width | 35-5/16" |
Depth | 9-3/8" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
36,000 BTU 23 SEER Mitsubishi Multi-Zone Ductless H2i Hyper Heat Pump Condenser w/ Base Pan Heater | |
SKU | MXZ-SM36NAMHZ |
Weight (in lbs) | 275.000000 |
Brand/Manufacturer | Mitsubishi |
Replaces | MXZ-SM36NAMHZ |
HSPF | 11 |
Cooling BTU | 36,000 |
Heating BTU | 33,000 |
Decibel Level (dBA) | 49 |
Refrigerant | R410A |
SEER1 (Efficiency) | 23 |
EER | 15 |
Liquid Line | 3/8" |
Suction Line | 5/8" |
Electrical | 230 V. 1 Phase 60 Hz |
Max Breaker Size | 45 amps |
Min. Breaker Size | 40 amps |
Amperage Requirement | 50 |
Tonnage | 3 Ton |
BTU/Tonnage | 36,000 BTU/3 Ton |
Zone Compatibility | Multi Zone |
Height | 52" |
Width | 41" |
Depth | 16" |
Warranty | Limited warranty: five years parts and seven years compressors |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents |
Safety Information | PROPOSITION 65 WARNING |
9,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone GL - Air Handler | |
SKU | MSZ-GL09NA |
Weight (in lbs) | 26.000000 |
Brand/Manufacturer | Mitsubishi |
Controller | Wireless Included |
Additional Information | Drain: 5/8" |
Cooling BTU | 9,000 BTU |
Heating BTU | 10,900 BTU |
Maximum CFM | 109-406 CFM |
Decibel Level (dBA) | 19-43 |
Refrigerant | R410A |
Capacity | Dehumidification Rate: 0.23 gal/hr |
Liquid Line | 1/4" |
Suction Line | 3/8" |
Electrical | 208/230v 1 Phase 60 Hz |
BTU/Tonnage | 9,000 BTU/0.75 Ton |
Mini-Split Type | Wall Mounted |
Zone Compatibility | Multi Zone |
Operating Mode | Cooling, Heating |
Height | 11-5/8" |
Width | 31-7/16" |
Depth | 9-1/8" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |