24,000 BTU 23 SEER Stealth Pinnacle Mini-Split 2-3 Zone Heat Pump Condenser

Stealth Pinnacle Series Multi Zone SC-24Z-HH-M3 Heat Pump Condenser

The Stealth Pinnacle Series Multi Zone SC-24Z-HH-M3 heat pump condenser is an Energy Star rated unit that provides Hyper Heat performance down to an outside temperature of -31 degrees Fahrenheit. This outdoor unit comes pre-charged with R410a refrigerant and has connections for up to 3 air handlers, allowing you to cover multiple rooms or zones in your space.

Key Features

• Energy Star Rated
• Maximum efficiency up to 23 SEER and 10.5 HSPF
• Heating temperatures range from -31°F to 75°F
• Cooling temperatures range from 0°F to 118°F
• 12 + 1 warranty with first-year unit replacement
• 18,000 BTU – 42,000 BTU condenser models available
• Rugged construction with acrylic resin fin coating for durability

Efficiency and Performance

The Pinnacle Series condensers offer the highest efficiency ratings of any multi zone mini-split, with a SEER rating of up to 23 and a HSPF rating of 10.5. This means you'll pay less for the same amount of heating and cooling compared to systems with lower SEER values. The SC-24Z-HH-M3 provides elite performance at an attractive price.

Warranty

The Stealth Pinnacle Series features a 12 + 1 warranty with first-year unit replacement. The standard warranty on the SC-24Z-HH-M3 is a 5-year parts and 7-year limited compressor warranty. However, by registering online and following your state and local installation codes, the compressor warranty can be extended to 12 years. In the event of a failure within the first year, you'll receive a free unit replacement.

Durability and Reliability

The Pinnacle Series condenser is built with rugged construction and features an acrylic resin fin coating for added durability. Precision engineering ensures powerful performance across a wide range of conditions, with the SC-24Z-HH-M3 providing continuous heat with outdoor temperatures as low as -31 degrees Fahrenheit.

Installation and Maintenance

Each Stealth Pinnacle Series condenser comes pre-charged with R410a refrigerant, enough for 25 feet of line set per air handler. The line set fittings are compression-type and require evacuation prior to refrigerant release. Line set kits, including insulated copper refrigerant lines, control wire, and drain hose extensions are available as additional accessories. The Pinnacle Series features self-diagnosing electronics, and error codes will display on the front of the indoor units in the event of a fault.

Additional Information

Please note that this system includes only the outdoor condenser, indoor air handlers, and wall-mounted or remote thermostats (depending on model) as depicted in the photo above. Additional accessories are required to complete the installation. Each air handler requires a separate refrigerant line set, control wire, and condensation control. The condenser requires connection to household power, wired through a disconnect switch and flexible, weatherproof conduit (whip). Additional optional accessories are also available. For help configuring your system, please call (888) 377-2850.