1-888-485-0777
Today's Hours 10am - 6pm est
Â
In stock
AHRI Number:207825582
Concealed duct air handlers offer a discreet and efficient way to cool or heat your home without visible air handlers on your walls or ceilings. These flexible units are designed to be concealed above the ceiling, below the floor, above a closet ceiling, above a hallway ceiling, or behind a soffit. Here are some of the benefits of concealed duct air handlers:
Concealed duct air handlers can be installed in various locations, giving you more flexibility with your home's design. They are perfect for small bedrooms or a master suite, as up to 4 flex duct runs can be connected, depending on the unit's capacity.
Concealed duct air handlers have a simple design that consists of a rear return air inlet and a front supply air outlet. The almost-silent squirrel cage fan pushes the cooled or heated air out of the unit, making it a quiet and efficient option for your home.
The concealed duct system allows for a high level of customization, as you can field-fabricate plenums using ductboard or attach a pre-made manifold takeoff. This flexibility allows you to create a unique solution for your home's specific needs.
Concealed duct air handlers are best used in new construction projects or additions, as the installation requires pre-planning and is similar in scope to a standard home HVAC installation. However, the benefits of a concealed duct system are worth the effort.
Concealed duct system installations require additional supplies such as flex ducting, register vents, plenums, and installation supplies, in addition to the equipment components. The concealed duct units have a factory-installed pump to lift the condensation. From there, you will need to use PVC to construct a drain system to a safe wastewater location.
Overall, concealed duct air handlers provide a discreet and customizable option for heating and cooling your home, with minimal impact on your home's design and aesthetic.
Concealed duct air handlers offer a discreet and efficient way to cool or heat your home without visible air handlers on your walls or ceilings. These flexible units are designed to be concealed above the ceiling, below the floor, above a closet ceiling, above a hallway ceiling, or behind a soffit. Here are some of the benefits of concealed duct air handlers:
Concealed duct air handlers can be installed in various locations, giving you more flexibility with your home's design. They are perfect for small bedrooms or a master suite, as up to 4 flex duct runs can be connected, depending on the unit's capacity.
Concealed duct air handlers have a simple design that consists of a rear return air inlet and a front supply air outlet. The almost-silent squirrel cage fan pushes the cooled or heated air out of the unit, making it a quiet and efficient option for your home.
The concealed duct system allows for a high level of customization, as you can field-fabricate plenums using ductboard or attach a pre-made manifold takeoff. This flexibility allows you to create a unique solution for your home's specific needs.
Concealed duct air handlers are best used in new construction projects or additions, as the installation requires pre-planning and is similar in scope to a standard home HVAC installation. However, the benefits of a concealed duct system are worth the effort.
Concealed duct system installations require additional supplies such as flex ducting, register vents, plenums, and installation supplies, in addition to the equipment components. The concealed duct units have a factory-installed pump to lift the condensation. From there, you will need to use PVC to construct a drain system to a safe wastewater location.
Overall, concealed duct air handlers provide a discreet and customizable option for heating and cooling your home, with minimal impact on your home's design and aesthetic.
Are you looking for an affordable and intelligent solution to heating and cooling your home? Look no further than ACiQ-36Z-HH-M4B. This multi zone heat pump condenser is designed to provide efficient and adaptive heating and cooling in almost any space and climate, all at an affordable cost. Here are some quick facts about this system:
The ACiQ-36Z-HH-M4B is an adaptive, inverter condenser that can support up to 4 air handlers at up to 1.25 times the condenser BTU rating, or 45,000 BTU across all air handlers. This system is designed to constantly self-adjust to provide the precise amount of heating or cooling needed to maintain your desired temperature in each room or zone. You can even set different temperatures for each room or turn off heating and cooling in unused areas. With a high efficiency rating of 21.5 SEER, you can save money both upfront and over the lifetime of the unit.
It's important to note that although the condenser is pre-charged, this equipment model does not have quick connect line set connectors and is not a self-install unit. You will need a professional to add more refrigerant and vacuum the lines as needed. Installation materials such as line sets, control wire, drain hose, whip and disconnect are not included, but are available at additional cost in the Accessories section. Keep in mind that a minimum of two air handlers is needed for the unit to function.
Upgrade your home's heating and cooling system with the affordable and intelligent ACiQ-36Z-HH-M4B.
E Liteis a plastic pad designed as a mounting base for air conditioning condensers. The rugged design provides uniform and generous ribbing for optimum, self-leveling ground support without inserts. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but not too light. A subtle texture prevents unit slide and presents a classic appearance, which is enhanced by rounded edges and a concrete gray color. Each pad is molded with its size in raised letters.
This Diversitech wall mount bracket is perfect for outdoor condensers. The length of the the wall bracket arms are 30" long. The condensing unit is mounted onto the L-shaped brackets.
Features:
18,000 BTU Concealed Duct ACiQ Mini-Split Air Handler | |
---|---|
SKU | ACIQ-18CD-HH-MB |
Weight (in lbs) | 67.000000 |
Brand/Manufacturer | ACiQ |
Cooling BTU | 18,000 BTU |
Heating BTU | 18,000 BTU |
Maximum CFM | 529.41 |
Decibel Level (dBA) | As low as 35 |
Electric Heat | Heat Pump |
Refrigerant | R410A |
Liquid Line | 1/4" |
Suction Line | 1/2" |
Electrical | 208/230V 1 Phase 60Hz |
Phase | Single Phase |
Max Breaker Size | 25 |
Min. Breaker Size | 20 |
BTU/Tonnage | 18,000 BTU/1.5 Ton |
Mini-Split Type | Concealed Duct |
Zone Compatibility | Multi Zone |
Height | 8.27" |
Width | 34.65" |
Depth | 26.54" |
Warranty | 12 year compressor, 7 year parts with online registration |
Resources | |
Safety Information | PROPOSITION 65 WARNING |
24,000 BTU Concealed Duct ACiQ Mini-Split Air Handler | |
SKU | ACIQ-24CD-HH-MB |
Weight (in lbs) | 105.820000 |
Brand/Manufacturer | ACiQ |
Cooling BTU | 24,000 BTU |
Heating BTU | 24,000 BTU |
Maximum CFM | 775.47 |
Decibel Level (dBA) | As Low as 35.5 |
Electric Heat | Heat Pump |
Refrigerant | R410A |
Liquid Line | 3/8" |
Suction Line | 5/8" |
Electrical | 208/230V 1 Phase 60Hz |
Phase | Single Phase |
Max Breaker Size | 35 |
Min. Breaker Size | 25 |
BTU/Tonnage | 24,000 BTU/2 Ton |
Mini-Split Type | Concealed Duct |
Zone Compatibility | Multi Zone |
Height | 9.8" |
Width | 43.31" |
Depth | 30.47" |
Warranty | 12 year compressor, 7 year parts with online registration |
Resources | |
Safety Information | PROPOSITION 65 WARNING |
36,000 BTU ACiQ Multi Zone Condenser w/ Extreme Heat | |
SKU | ACiQ-36Z-HH-M4B |
Refrigerant Charge | 100' |
Weight (in lbs) | 255.070000 |
AHRI Certificate Number | 207825582 |
Brand/Manufacturer | ACiQ |
HSPF | 10.5 |
Cooling BTU | 36000 BTU |
Heating BTU | 36000 BTU |
Decibel Level (dBA) | 64 |
Electric Heat | Heat Pump |
Energy Star | Yes |
Refrigerant | R410A |
SEER1 (Efficiency) | 21-22 |
SEER2 (Efficiency) | 22.2 |
EER | 13.5 |
Compressor Type | Rotary |
Liquid Line | 1/4" (4) |
Suction Line | 3/8" (3); 1/2" (1) |
Electrical | 208/230V 1 Phase 60 Hz |
Max Breaker Size | 60 Amps |
Min. Breaker Size | 40 Amps |
Tonnage | 3 Ton |
BTU/Tonnage | 36,000 BTU/3 Ton |
Mini-Split Type | Wall Mounted |
Zone Compatibility | Multi Zone |
Ambient Temperature Range | -22 ~ 122 |
Height | 52-1/2" |
Width | 37-1/2" |
Depth | 16-2/5" |
Warranty | 12 year compressor, 7 year parts with online registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
Diversitech E Lite Equipment Pad 18" x 38" x 3" | |
SKU | EL1838-3 |
Weight (in lbs) | 16.000000 |
Brand/Manufacturer | Online Supply |
Height | 3" |
Width | 18" |
Depth | 38" |
Safety Information | PROPOSITION 65 WARNING |
Wall Mount Bracket for Condensers 30" | |
SKU | ACB-30 |
Weight (in lbs) | 9.200000 |
Brand/Manufacturer | Online Supply |
Length | 30" |
Height | 16" |
Width | 2" |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |