55,000 BTU 22 SEER2 ACiQ 4-Zone Floor Mounted Mini Split System w/ Extreme Heat - 12+12+12+12

ACiQ Floor Mounted Air Handlers for Efficient Heating and Cooling

When space for a standard high wall unit is not available, ACiQ Floor Mounted air handlers are the ideal solution. Also known as heat console type air handlers, these units surface mount low on the wall or on the floor, making them perfect for sun porches or attic rooms with limited wall space. They are wider, taller, and slightly shallower than high wall units, and are optimized for heating.

Optimized for Heat

ACiQ Floor Mounted air handlers are designed to take in return air at the top edge and deliver it at the bottom, making them ideal for heating. By delivering warm air at floor level, stratification due to heat rise is eliminated. When the unit is put into cooling mode, the airflow direction is reversed to improve air mixing in the room.

Features

• 12,000 BTU of heating or cooling power
• Dry and fan modes are also available
• Suitable for small rooms in most climates
• Remote control thermostat included for convenient temperature adjustments

Note: The 18k and 24k models may have a slightly different appearance from the 12k model, and can be surface mounted on the floor or ceiling. Please refer to the appropriate manual for your specific model.

Upgrade your HVAC system with the efficient and space-saving ACiQ Floor Mounted air handlers. Perfect for sun porches and attic rooms, these units provide optimal heating and cooling while taking up minimal wall space. Contact us today to learn more about the ACiQ Floor Mounted air handlers and installation options.

ACiQ-55Z-HH-M5B: The Adaptive Solution to Affordable Heating and Cooling

ACiQ offers an intelligent solution to heating and cooling that is adaptable to any space and climate, all at an affordable cost. With the ACiQ-55Z-HH-M5B, you can operate up to 5 air handlers from a single condenser, saving outdoor space and keeping you comfortable in your home.

Quick Facts

• 55,000 BTU and 22 SEER2 multi-zone heat pump condenser
• Capable of operating with up to 5 attached air handlers
• Efficient cooling from -22°F to 122°F outdoor temperatures
• Efficient heating from -22°F to 57°F outdoor temperatures
• Integrated Max Heat technology with base pan heater
• Gold Fin full-protection coating on condenser coil
• Quiet operation even at the highest workloads

55,000 BTU, 22 SEER2

The ACiQ-55Z-HH-M5B is a 55,000 BTU condenser designed to effortlessly support up to 4 air handlers at a maximum of 1.25 times the condenser BTU rating, or 60,000 BTU across all air handlers. This adaptive, inverter condenser is continuously self-adjusting to provide the precise amount of heating or cooling necessary to maintain the desired temperature in each room or zone. With the ability to set different temperatures room by room and turn off heating and cooling in unused areas, combined with a high efficiency rating of 22 SEER2, you can rest assured that you are buying a system intelligently designed to save you money upfront and over the lifetime of the unit.

While the condenser comes pre-charged, it is important to note that this model does not have quick connect line set connectors and is not a self-install unit. Professional assistance is needed to add more refrigerant and vacuum the lines as necessary. Additionally, installation materials like line sets, control wire, drain hose, whip, and disconnect are not included but can be purchased at an additional cost in the Accessories section found to the right of this text. It is important to note that for all multi-zone ACiQ condensers, a minimum of two air handlers is required for the unit to function.

E Liteis a plastic pad designed as a mounting base for air conditioning condensers. The rugged design provides uniform and generous ribbing for optimum, self-leveling ground support without inserts. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but not too light. A subtle texture prevents unit slide and presents a classic appearance, which is enhanced by rounded edges and a concrete gray color. Each pad is molded with its size in raised letters.

• High recycled plastic content
• Subtle texture resists unit slide
• Unaffected by UV or weather
• Uniform ribbing transfers load evenly
• Drillable for securing unit
• Lightweight, yet rugged

This Diversitech wall mount bracket is perfect for outdoor condensers. The length of the the wall bracket arms are 30" long. The condensing unit is mounted onto the L-shaped brackets.

Features:

• Steel: 10 GA
• Powder-coated grey Finish
• Load rating: 600 lbs per pair
• Holes will accommodate anchors for installation
• Warranty: 1 year
• ACB line of wall brackets are approved by the Florida Building Commission and are High Velocity Hurricane Zone (HVHZ) approved. (See product certification documentation for complete details.)