1-888-485-0777
Today's Hours 10am - 6pm est
Â
In stock
The Mitsubishi MLZ-KP12NA is a ceiling cassette air handler that provides superior heating and cooling to your medium-sized room when paired with a compatible condenser. With its enhanced operation features, it lives up to Mitsubishi's industry-leading comfort standards, ensuring that you stay comfortable all year round.
The Mitsubishi MLZ-KP12NA air handler has a cooling capacity of 12,000 BTU and a SEER rating of 17-20. Please note that a compatible condenser is required for the air handler to function properly.
The MLZ-KP12NA air handler has a small form factor and can easily fit between standard 16" joists, with a depth of only 7-1/2". This ceiling cassette unit can be installed in locations where wall or floor mounted units are not practical or desired. A ceiling cassette grill is required for all installations and is available at an additional cost. To ensure proper functioning, it is recommended to install the air handler with a condenser, controller, and other installation equipment, all of which are available for purchase.
The Mitsubishi MLZ-KP12NA air handler is designed to provide quiet operation and enhanced comfort. With its multiple operating modes and multiple fan speeds, the air handler will heat and cool your room with ease and adjust the temperature more precisely to keep you comfortable.
The Mitsubishi MLZ-KP12NA air handler is compatible with the following condensers:
Please note that the installation of the air handler with a compatible condenser, controller, and other installation equipment is required for proper functioning.
Provides simple and secure mounting for small and large piping systems, ductwork runs, cable trays and smaller equipment such as condensers. Linear track offers adjustable mounting. Manufactured from exterior grade materials.
E Lite Condenser Pad is designed to provide solid support for air conditioning condensers. It's made from sturdy polypropylene, striking a balance between lightness and stability. Its robust design ensures a level ground without the need for extra components.
E Lite Risers complement the Condenser Pad, allowing you to adjust your setup as needed. They are constructed from weather-resistant PVC for outdoor use.
E Lite Condenser Pad and Risers offer reliable support without any complications. They are built to last and deliver efficient performance. Consider E Lite for your support needs – it's a practical solution for your projects.
The Mitsubishi MXZ-2C20NA2 is a heat pump condenser designed for use in multi-zone system setups. Instead of using multiple single zone condensers, which can take up a lot of space in your yard, a multi-zone unit is more practical in many applications, as it requires only one air handler per room that you are trying to heat and cool.
The Mitsubishi MXZ-2C20NA2 is rated at 20,000 BTU, which should generally be the same or greater than the total BTU count across all air handlers that this unit is paired with. While a certified pairing may have a higher BTU count total, the condenser can handle more, but anything higher than this rating can potentially lower the speed that the unit can heat and cool. It can also limit the functional outputs of each air handler if they are all running at the same time.
Please note: This heat pump condenser must be installed with compatible air handlers, controllers, and other installation equipment, available at an additional cost, to function.
Mitsubishi offers a 5-year parts and 7-year compressor warranty on all of its products. If the unit is registered online through the manufacturer after installation that follows your state and local codes, the warranty is upgraded to a 10-year parts and compressor warranty.
With its variable speed compressor, the MXZ-2C20NA2 can provide more precise adjustments to the covered spaces with the right air handlers. This also slightly improves electrical efficiency by ramping the compressor up and down based on the unit’s air handlers’ needs, as well as providing a more stable temperature output from the connected air handlers to provide superior comfort.
For ease of control, many air handlers that are compatible with the MXZ-2C20NA2 can use any Mitsubishi-brand thermostat or adapter. The most convenient to control is the Kumo cloud WiFi adapter, found here, which allows each air handler to be accessed from anywhere that you have internet. Please note that in most applications, you will need one thermostat or adapter per indoor air handler that you want to control with it.
The Mitsubishi MLP-444W grille is an essential component needed to complete a KP cassette installation. The grille is designed to fit the cassette unit perfectly and provide optimal air distribution throughout the room. It is made from high-quality materials and built to last, ensuring that the unit operates efficiently and effectively.
Features:
Compatible Indoor Units:
Ceiling Cassette
20,000 BTU 20 SEER Mitsubishi Dual Zone Mini Split Heat Pump System 12+12 | |
---|---|
SKU | MXZ-2C20NA2 / 2-MLZ-KP12NA |
Brand/Manufacturer | Mitsubishi |
Refrigerant | R410A |
SEER1 (Efficiency) | 18-20 |
BTU/Tonnage | 18,000 BTU/1.5 Ton |
Mini-Split Type | Ceiling Cassette |
Indoor Units | 12 + 12 |
Zone/Room 1 Size | 12k for 400-600 sq ft |
Zone/Room 2 Size | 12k for 400-600 sq ft |