22,000 BTU 17 SEER Mitsubishi Dual Zone Mini Split H2i Hyper Heat Pump System 6+12

Mitsubishi MSZ-FS12NA Air Handler

If you're looking for a reliable and efficient air handler to cool a small room, the Mitsubishi MSZ-FS12NA might be the perfect solution. This 12,000 BTU wall-mounted air handler comes with a remote and a built-in I-SEE sensor, which directs airflow more effectively and maintains a constant temperature in the room. It also boasts a .375 gallon per hour dehumidification rate.

Note: To ensure proper functionality, this air handler must be installed with a condenser and other installation equipment, which are available at an additional cost.

Multi-Zone Capability

The Mitsubishi MSZ-FS12NA air handler can function as a single zone system or be integrated into a multi-zone setup. This flexibility makes it a versatile option for both residential and commercial applications.

I-SEE Sensor Technology

The built-in I-SEE sensor constantly reads the temperature from multiple directions in the room, allowing the air handler to aim airflow where it is needed most. This results in a more even temperature distribution and reduced unit run time, which can save you money on energy bills.

Enhanced Filtration System

Mitsubishi cares about your health, which is why they factory-installed an enhanced filtration system in the MSZ-FS12NA air handler. This system helps remove dust, allergens, and other airborne particles, creating a cleaner and healthier indoor environment.

Overview of the Mitsubishi MXZ-2C20NAHZ2 Heat Pump Condenser

Introduction

The Mitsubishi MXZ-2C20NAHZ2 is a heat pump condenser designed for use in multi-zone systems. It is an efficient and practical option for applications where multiple single-zone condensers would take up too much space in the yard. This unit can keep you warm even during the coldest months of the year, thanks to its integrated drain pan heater and Hyper Heat technology.

Features

• 20,000 BTU multi-zone heat pump condenser
• Variable speed inverter-driven compressor
• Quiet operation
• Hyper Heat technology, supporting enhanced comfort down to -13°F

20,000 BTU

The Mitsubishi MXZ-2C20NAHZ2 is rated to handle up to 20,000 BTU. This is generally sufficient to accommodate the total BTU count across all air handlers that this unit is paired with. However, in some cases, a certified pairing may have a higher BTU count total than this condenser's rating. It is important to note that this unit must be installed with compatible air handlers, controllers, and other installation equipment, which are available at an additional cost.

Please keep in mind that exceeding the BTU rating of the condenser can potentially lower the speed at which the unit can heat and cool. It can also limit the functional outputs of each air handler if they are all running at the same time.

Warranty

Mitsubishi offers a 5-year parts and 7-year compressor warranty on all of its products. When the unit is registered online through the manufacturer after installation that follows your state and local codes, the warranty is upgraded to a 10-year parts and compressor warranty.

Enhanced Comfort

The variable speed compressor of the MXZ-2C20NAHZ2 allows for more precise adjustments to the covered spaces when paired with the right air handlers. This also slightly improves electrical efficiency by ramping the compressor up and down based on the unit's air handlers' needs, as well as providing a more stable temperature output from the connected air handlers to provide superior comfort.

Intelligent Control

For ease of control, many air handlers that are compatible with the MXZ-2C20NAHZ2 can use any Mitsubishi-brand thermostat or adapter. The most convenient option is the Kumo cloud WiFi adapter, which allows each air handler to be accessed from anywhere with an internet connection. Please note that in most applications, you will need one thermostat or adapter per indoor air handler that you want to control.

The Mitsubishi MSZ-FS06NA air handler is an efficient heating and cooling solution designed for small rooms. Please note that installation requires additional equipment, including a condenser, which is available at an additional cost.

Features:

• 6,000 BTU cooling capacity
• Built-in I-SEE sensor for improved airflow direction
• .225 gallon per hour dehumidification rate
• Enhanced filtration system for improved air quality
• Compatible with single zone and multi-zone systems
• Includes remote control for convenient operation

The I-SEE sensor technology in the MSZ-FS06NA air handler allows for improved temperature control by reading the temperature from multiple directions and directing airflow where it is needed most. This reduces the unit's runtime and helps to maintain a constant temperature. Additionally, the unit has a high dehumidification rate, making it an ideal solution for humid climates. With an enhanced filtration system, the air handler can help improve the air quality in the room.