1-888-485-0777
Today's Hours 10am - 6pm est
Â
In stock
If you're looking for an efficient way to cool a medium-sized room, the Mitsubishi MSZ-FS15NA air handler is an excellent choice. This wall-mounted unit comes with a remote for convenient temperature control and offers several features to ensure optimal comfort.
Before purchasing this air handler, it's important to note that it must be installed with a condenser and other equipment, which are available at an additional cost.
With its 15,000 BTU capacity and .405 gallon per hour dehumidification rate, this air handler is designed to provide efficient cooling for medium-sized rooms. Its built-in I-SEE sensor technology constantly reads the temperature from multiple directions in the room, directing airflow to where it's needed most. This results in a more constant temperature and decreased run time for the unit.
In addition to its cooling capabilities, the Mitsubishi MSZ-FS15NA air handler also comes with a factory-installed enhanced filtration system. This system helps to remove pollutants and allergens from the air, promoting a healthier environment for you and your family.
This air handler is designed to function as a single zone system or as part of a multi zone system setup, providing versatility for your cooling needs.
Overall, the Mitsubishi MSZ-FS15NA air handler offers efficient and effective cooling for medium-sized rooms, with several features to ensure optimal comfort and health. Just remember to purchase the necessary installation equipment, available at an additional cost, for proper setup.
The Mitsubishi MXZ-SM36NAMHZ-U1 is a multi-zone heat pump condenser that is ideal for setups where multiple air handlers are needed to heat and cool different rooms. This unit has an integrated drain pan heater and can operate in temperatures as low as -13°F, making it suitable for use in cold climates.
The MXZ-SM36NAMHZ-U1 is a powerful heat pump condenser with a 36,000 BTU rating. This means that it can handle a total BTU count equal to or greater than the total BTU count of all the air handlers it is paired with. Certified pairings may have a higher BTU count, but exceeding the unit's rating can impact its efficiency.
The unit's variable speed compressor provides quiet operation and precise temperature control. It ramps up and down based on the air handlers' needs, which improves its electrical efficiency and provides enhanced comfort.
The MXZ-SM36NAMHZ-U1 is equipped with Hyper Heat technology, which supports enhanced comfort even in temperatures as low as -13°F.
To function properly, this unit requires at least one branch box, which enables it to connect to multiple air handlers.
Mitsubishi offers a 5-year parts and 7-year compressor warranty on all its products. Registering the unit online after installation and complying with state and local codes upgrades the warranty to a 10-year parts and compressor warranty.
As the unit has only one set of line set ports, it requires a branch box to connect to multiple air handlers. This unit also requires air handlers, controllers, and other installation equipment, which are available at an additional cost.
The unit's variable speed compressor and precise temperature control provide superior comfort. It ensures that each air handler's functional outputs remain stable even when multiple air handlers are running simultaneously.
Mitsubishi-brand thermostats or adapters can control most air handlers that are compatible with the MXZ-SM36NAMHZ-U1. The Kumo cloud WiFi adapter is the most convenient to control, providing access to each air handler from anywhere with an internet connection. Please note that one thermostat or adapter is needed per indoor air handler that needs control access.
The Mitsubishi MSZ-FS06NA air handler is an efficient heating and cooling solution designed for small rooms. Please note that installation requires additional equipment, including a condenser, which is available at an additional cost.
The I-SEE sensor technology in the MSZ-FS06NA air handler allows for improved temperature control by reading the temperature from multiple directions and directing airflow where it is needed most. This reduces the unit's runtime and helps to maintain a constant temperature. Additionally, the unit has a high dehumidification rate, making it an ideal solution for humid climates. With an enhanced filtration system, the air handler can help improve the air quality in the room.
The Mitsubishi MSZ-FS09NA air handler is an efficient heating and cooling solution designed for small rooms. Please note that installation requires additional equipment, including a condenser, which is available at an additional cost.
The I-SEE sensor technology in the MSZ-FS09NA air handler allows for improved temperature control by reading the temperature from multiple directions and directing airflow where it is needed most. This reduces the unit's runtime and helps to maintain a constant temperature. Additionally, the unit has a high dehumidification rate, making it an ideal solution for humid climates. With an enhanced filtration system, the air handler can help improve the air quality in the room.
15,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FS Series - Air Handler | |
---|---|
SKU | MSZ-FS15NA |
Weight (in lbs) | 29.000000 |
Brand/Manufacturer | Mitsubishi |
Controller | Wireless Included |
Additional Information | Drain: 5/8" |
Cooling BTU | 15,000 |
Heating BTU | 18,000 |
Maximum CFM | 194-497 CFM |
Decibel Level (dBA) | 25-46 |
Refrigerant | R410A |
Capacity | Dehumidification Rate: 0.41 gal/hr |
Liquid Line | 1/4" |
Suction Line | 1/2" |
Electrical | 208/230V 1 Phase 60 Hz |
Phase | Single Phase |
BTU/Tonnage | 15,000 BTU/1.25 Ton |
Mini-Split Type | Wall Mounted |
Zone Compatibility | Multi Zone |
Operating Mode | Cooling, Heating |
Height | 12-11/16" |
Width | 36-7/16" |
Depth | 9-3/16" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
36,000 BTU 23 SEER Mitsubishi Multi-Zone Ductless H2i Hyper Heat Pump Condenser w/ Base Pan Heater | |
SKU | MXZ-SM36NAMHZ |
Weight (in lbs) | 275.000000 |
Brand/Manufacturer | Mitsubishi |
Replaces | MXZ-SM36NAMHZ |
HSPF | 11 |
Cooling BTU | 36,000 |
Heating BTU | 33,000 |
Decibel Level (dBA) | 49 |
Refrigerant | R410A |
SEER1 (Efficiency) | 23 |
EER | 15 |
Liquid Line | 3/8" |
Suction Line | 5/8" |
Electrical | 230 V. 1 Phase 60 Hz |
Max Breaker Size | 45 amps |
Min. Breaker Size | 40 amps |
Amperage Requirement | 50 |
Tonnage | 3 Ton |
BTU/Tonnage | 36,000 BTU/3 Ton |
Zone Compatibility | Multi Zone |
Height | 52" |
Width | 41" |
Depth | 16" |
Warranty | Limited warranty: five years parts and seven years compressors |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents |
Safety Information | PROPOSITION 65 WARNING |
6,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FS Series - Air Handler | |
SKU | MSZ-FS06NA |
Weight (in lbs) | 29.000000 |
Brand/Manufacturer | Mitsubishi |
Controller | Wireless Included |
Additional Information | Drain: 5/8" |
Cooling BTU | 6,000 |
Heating BTU | 8,700 |
Maximum CFM | 117-437 CFM |
Decibel Level (dBA) | 20-42 |
Refrigerant | R410A |
Capacity | Dehumidification Rate: 0.23 gal/hr |
Liquid Line | 1/4" |
Suction Line | 3/8" |
Electrical | 208/230V 1 Phase 60 Hz |
Phase | Single Phase |
BTU/Tonnage | 6,000 BTU/0.5 Ton |
Mini-Split Type | Wall Mounted |
Zone Compatibility | Multi Zone |
Operating Mode | Cooling, Heating |
Height | 12-11/16" |
Width | 36-7/16" |
Depth | 9-13/16" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
9,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FS Series - Air Handler | |
SKU | MSZ-FS09NA |
Weight (in lbs) | 29.000000 |
Brand/Manufacturer | Mitsubishi |
Controller | Wireless Included |
Additional Information | Drain: 5/8" |
Cooling BTU | 9,000 |
Heating BTU | 10,900 |
Maximum CFM | 117-381 CFM |
Decibel Level (dBA) | 20-42 |
Refrigerant | R410A |
Capacity | Dehumidification Rate: 0.23 gal/hr |
Liquid Line | 1/4" |
Suction Line | 3/8" |
Electrical | 208/230V 1 Phase 60 Hz |
BTU/Tonnage | 9,000 BTU/0.75 Ton |
Mini-Split Type | Wall Mounted |
Zone Compatibility | Multi Zone |
Operating Mode | Cooling, Heating |
Height | 12-11/16" |
Width | 36-7/16" |
Depth | 9-3/16" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |