1-888-485-0777
Today's Hours 10am - 6pm est
Â
In stock
If you're looking for a reliable and efficient air handler to cool a small room, the Mitsubishi MSZ-FS12NA might be the perfect solution. This 12,000 BTU wall-mounted air handler comes with a remote and a built-in I-SEE sensor, which directs airflow more effectively and maintains a constant temperature in the room. It also boasts a .375 gallon per hour dehumidification rate.
Note: To ensure proper functionality, this air handler must be installed with a condenser and other installation equipment, which are available at an additional cost.
The Mitsubishi MSZ-FS12NA air handler can function as a single zone system or be integrated into a multi-zone setup. This flexibility makes it a versatile option for both residential and commercial applications.
The built-in I-SEE sensor constantly reads the temperature from multiple directions in the room, allowing the air handler to aim airflow where it is needed most. This results in a more even temperature distribution and reduced unit run time, which can save you money on energy bills.
Mitsubishi cares about your health, which is why they factory-installed an enhanced filtration system in the MSZ-FS12NA air handler. This system helps remove dust, allergens, and other airborne particles, creating a cleaner and healthier indoor environment.
The Mitsubishi MXZ-4C36NA2 is a heat pump condenser designed to be used in multi zone system setups. As one air handler is needed per room that you are trying to heat and cool, multiple single zone condensers can take up a lot of space in your yard, making a multi zone unit more practical in many applications.
Mitsubishi offers a 5 year parts and 7 year compressor warranty on all of its products. When the unit is registered online through the manufacturer after an installation that follows your state and local codes, the warranty is upgraded to a 10 year parts and compressor warranty.
The Mitsubishi MSZ-FS09NA air handler is an efficient heating and cooling solution designed for small rooms. Please note that installation requires additional equipment, including a condenser, which is available at an additional cost.
The I-SEE sensor technology in the MSZ-FS09NA air handler allows for improved temperature control by reading the temperature from multiple directions and directing airflow where it is needed most. This reduces the unit's runtime and helps to maintain a constant temperature. Additionally, the unit has a high dehumidification rate, making it an ideal solution for humid climates. With an enhanced filtration system, the air handler can help improve the air quality in the room.
Provides simple and secure mounting for small and large piping systems, ductwork runs, cable trays and smaller equipment such as condensers. Linear track offers adjustable mounting. Manufactured from exterior grade materials.
E Lite Condenser Pad is designed to provide solid support for air conditioning condensers. It's made from sturdy polypropylene, striking a balance between lightness and stability. Its robust design ensures a level ground without the need for extra components.
E Lite Risers complement the Condenser Pad, allowing you to adjust your setup as needed. They are constructed from weather-resistant PVC for outdoor use.
E Lite Condenser Pad and Risers offer reliable support without any complications. They are built to last and deliver efficient performance. Consider E Lite for your support needs – it's a practical solution for your projects.
12,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FS Series - Air Handler | |
---|---|
SKU | MSZ-FS12NA |
Weight (in lbs) | 29.000000 |
Brand/Manufacturer | Mitsubishi |
Controller | Wireless Included |
Additional Information | Drain: 5/8" |
Cooling BTU | 12,000 |
Heating BTU | 13,600 |
Maximum CFM | 117-398 CFM |
Decibel Level (dBA) | 21-42 |
Refrigerant | R410A |
Capacity | Dehumidification Rate: 0.38 gal/hr |
Liquid Line | 1/4" |
Suction Line | 3/8" |
Electrical | 208/230V 1 Phase 60 Hz |
Phase | Single Phase |
BTU/Tonnage | 12,000 BTU/1 Ton |
Mini-Split Type | Wall Mounted |
Zone Compatibility | Multi Zone |
Operating Mode | Cooling, Heating |
Height | 12-11/16" |
Width | 36-7/16" |
Depth | 9-3/16" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
36,000 BTU Ductless Mitsubishi Mini-Split Multi Zone MXZ-C Series - Heat Pump Condenser | |
SKU | MXZ-4C36NA3 |
Weight (in lbs) | 271.000000 |
Brand/Manufacturer | Mitsubishi |
Additional Information | Heat Pump |
Additional Information | Maximum Line Set Length: 82' |
Additional Information | Maximum System Line Length: 492' |
HSPF | 11 |
Cooling BTU | 36,000 |
Heating BTU | 42,000 |
Decibel Level (dBA) | 56 |
Energy Star | No |
Refrigerant | R410A |
SEER1 (Efficiency) | 19 |
EER | 15 |
Liquid Line | 1/4" |
Suction Line | 1/2" (1) 3/8" (3) |
Electrical | 208/230V 1 Phase 60 Hz |
Phase | Single Phase |
Max Breaker Size | 40 |
Min. Breaker Size | 30 |
Tonnage | 3 Ton |
BTU/Tonnage | 36,000 BTU/3 Ton |
Min/Max Outdoor Temp for Heating | 5°-65° |
Min/Max Outdoor Temp for Cooling | 14°-115° |
Zone Compatibility | Multi Zone |
Operating Mode | Cooling, Heating |
Height | 31" |
Width | 37" |
Depth | 13" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
9,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FS Series - Air Handler | |
SKU | MSZ-FS09NA |
Weight (in lbs) | 29.000000 |
Brand/Manufacturer | Mitsubishi |
Controller | Wireless Included |
Additional Information | Drain: 5/8" |
Cooling BTU | 9,000 |
Heating BTU | 10,900 |
Maximum CFM | 117-381 CFM |
Decibel Level (dBA) | 20-42 |
Refrigerant | R410A |
Capacity | Dehumidification Rate: 0.23 gal/hr |
Liquid Line | 1/4" |
Suction Line | 3/8" |
Electrical | 208/230V 1 Phase 60 Hz |
BTU/Tonnage | 9,000 BTU/0.75 Ton |
Mini-Split Type | Wall Mounted |
Zone Compatibility | Multi Zone |
Operating Mode | Cooling, Heating |
Height | 12-11/16" |
Width | 36-7/16" |
Depth | 9-3/16" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
Condenser Risers - 4" x 18" - 2 Pack | |
SKU | 87762 |
Weight (in lbs) | 397.000000 |
Brand/Manufacturer | Online Supply |
Diversitech E Lite Equipment Pad and Risers Kit 18" x 38" x 3" | |
SKU | 87762 / EL1838-3 |
Weight (in lbs) | 25.000000 |
Brand/Manufacturer | Online Supply |
Height | 3" |
Width | 18" |
Depth | 38" |
Safety Information | PROPOSITION 65 WARNING |