36,000 BTU 15.8 SEER Mitsubishi Tri Zone Mini Split H2i Hyper Heat Pump System 12+12+12 - Ceiling Cassette

About the Mitsubishi SLZ-KF12NA Air Handler

The Mitsubishi SLZ-KF12NA is a 12,000 BTU ceiling-recessed air handler, designed to provide comfort in small rooms or spaces where wall-mounted units are not practical. With a .35 gallon per hour dehumidification rate, this air handler can help maintain a comfortable environment even in humid conditions.

Installation Requirements

Important: Please note that this air handler requires additional equipment for proper installation, including a condenser, controller, and other installation equipment. These items are available for purchase separately.

Features and Benefits

• Integrated 4-direction airflow for enhanced comfort
• Fresh air intake knockouts for improved air quality
• Built-in condensate lift mechanism for simplified installation
• Cassette grille not included in the cost of the unit

I-SEE Sensor Upgrade

The cassette grille shown in the image includes an optional I-SEE sensor, which is available at an additional cost. The I-SEE sensor provides enhanced functionality by more precisely redirecting the airflow of the unit. Please note that without this upgrade, the grille will not include this functionality.

Overall, the Mitsubishi SLZ-KF12NA is a reliable and efficient air handler that can provide comfort in small rooms or spaces. Just be sure to purchase the necessary installation equipment to ensure proper functionality.

Mitsubishi MXZ-SM36NAMHZ-U1: Multi-Zone Heat Pump Condenser

Overview

The Mitsubishi MXZ-SM36NAMHZ-U1 is a multi-zone heat pump condenser that is ideal for setups where multiple air handlers are needed to heat and cool different rooms. This unit has an integrated drain pan heater and can operate in temperatures as low as -13°F, making it suitable for use in cold climates.

Features

36,000 BTU Multi-Zone Heat Pump Condenser

The MXZ-SM36NAMHZ-U1 is a powerful heat pump condenser with a 36,000 BTU rating. This means that it can handle a total BTU count equal to or greater than the total BTU count of all the air handlers it is paired with. Certified pairings may have a higher BTU count, but exceeding the unit's rating can impact its efficiency.

Variable Speed Inverter-Driven Compressor

The unit's variable speed compressor provides quiet operation and precise temperature control. It ramps up and down based on the air handlers' needs, which improves its electrical efficiency and provides enhanced comfort.

Hyper Heat Technology

The MXZ-SM36NAMHZ-U1 is equipped with Hyper Heat technology, which supports enhanced comfort even in temperatures as low as -13°F.

Requires a Branch Box

To function properly, this unit requires at least one branch box, which enables it to connect to multiple air handlers.

Warranty

Mitsubishi offers a 5-year parts and 7-year compressor warranty on all its products. Registering the unit online after installation and complying with state and local codes upgrades the warranty to a 10-year parts and compressor warranty.

Required Equipment

Branch Box

As the unit has only one set of line set ports, it requires a branch box to connect to multiple air handlers. This unit also requires air handlers, controllers, and other installation equipment, which are available at an additional cost.

Enhanced Comfort and Intelligent Control

Enhanced Comfort

The unit's variable speed compressor and precise temperature control provide superior comfort. It ensures that each air handler's functional outputs remain stable even when multiple air handlers are running simultaneously.

Intelligent Control

Mitsubishi-brand thermostats or adapters can control most air handlers that are compatible with the MXZ-SM36NAMHZ-U1. The Kumo cloud WiFi adapter is the most convenient to control, providing access to each air handler from anywhere with an internet connection. Please note that one thermostat or adapter is needed per indoor air handler that needs control access.

The Mitsubishi MHK2 is the second revision of Mitsubishi's popular wireless controller set designed for use with M & P Series residential and light commercial units. This controller provides comprehensive 7-day scheduling and a clear, backlit display for easy use.

With the updated MHK2, you can now use the Kumo Cloud wi-fi adapter (sold separately) alongside the wireless controller. You no longer have to choose between internet and wireless control--you can have both!

Components

The MRCH2 is the main body of the thermostat, which can be placed up to 200 feet away from the indoor unit without requiring line of sight. The MRC2 cable connects to the CN105 connector on the indoor unit's control board, and the other end of the cable connects to the MIFH2 receiver. The MIFH2 receiver can be placed on the right side of a wall-mounted unit, in the pocket of an MLZ-KP cassette, or anywhere near the control side of a ducted or square cassette unit.

Features

• Includes MRCH2 thermostat, MIFH2 wireless receiver, and MRC2 cable
• Backlit display for easy viewing
• Can sense temperature at the indoor unit (default) or at the controller
• Supports both Fahrenheit and Celsius temperature scales
• No batteries required
• Compatible with both single-zone and multi-zone systems
• Offers language options in English, French, and Spanish

Compatible Indoor Units:

Wall Mounted

• GL Series: MSZ-GL06NA-U1, MSZ-GL09NA-U1, MSZ-GL12NA-U1, MSZ-GL15NA-U1, MSZ-GL18NA-U1, MSZ-GL24NA-U1, MSY-GL09NA-U1, MSY-GL12NA-U1, MSY-GL15NA-U1, MSY-GL18NA-U1, MSY-GL24NA-U1
• FH Series: MSZ-FH06NA, MSZ-FH09NA, MSZ-FH12NA, MSZ-FH15NA, MSZ-FH18NA2
• EF Series: MSZ-EF09NAB-U1, MSZ-EF09NAS-U1, MSZ-EF09NAW-U1, MSZ-EF12NAB-U1, MSZ-EF12NAS-U1, MSZ-EF12NAW-U1, MSZ-EF15NAB-U1, MSZ-EF15NAS-U1, MSZ-EF15NAW-U1, MSZ-EF18NAB-U1, MSZ-EF18NAS-U1, MSZ-EF18NAW-U1
• JP Series: MSZ-JP09WA-U1, MSZ-JP12WA-U1
• WR Series: MSZ-WR09NA-U1, MSZ-WR12NA-U1, MSZ-WR18NA-U1, MSZ-WR24NA-U1
• D Series: MSZ-D30NA-8, MSZ-D36NA-8, MSY-D30NA-8, MSY-D36NA-8
• P Series: PKA-A12HA7, PKA-A18HA7,PKA-A24KA7, PKA-A30KA7, PKA-A36KA7

Ducted

• KD Series: SEZ-KD09NA4R1.TH, SEZ-KD12NA4R1.TH, SEZ-KD15NA4R1.TH, SEZ-KD18NA4R1.TH
• P Series: PEAD-A09AA7, PEAD-A12AA7, PEAD-A15AA7, PEAD-A18AA7, PEAD-A24AA7, PEAD-A30AA7, PEAD-A36AA7, PEAD-A42AA7

Ceiling Cassette

• KF Series: SLZ-KF09NA, SLZ-KF12NA, SLZ-KF15NA, SLZ-KF18NA
• KP Series: MLZ-KP09NA, MLZ-KP12NA, MLZ-KP18NA
• P Series: PLA-A12EA7, PLA-A18EA7, PLA-A24EA7, PLA-A30EA7, PLA-A36EA7, PLA-A42EA7

Floor Mounted

• MFZ-KJ09NA-U1, MFZ-KJ12NA-U1, MFZ-KJ15NA-U1, MFZ-KJ18NA-U1

Multi Position Air Handler

• KP: SVZ-KP12NA, SVZ-KP18NA, SVZ-KP24NA, SVZ-KP30NA, SVZ-KP36NA
• P Series: PVA-A12AA7, PVA-A18AA7, PVA-A24AA7, PVA-A30AA7, PVA-A36AA7, PVA-A42AA7

Ceiling Suspended

• P Series: PCA-A24KA7, PCA-A30KA7, PCA-A36KA7, PCA-A42KA7

The Mitsubishi PAC-US444CN-1 adapter provides a simple solution for controlling a mini split indoor unit with a field supplied 24v thermostat. By connecting the adapter to the CN105 connector, a 24VAC circuit can power the thermostat and control the unit. This adapter offers several modes including cool, heat, fan only, and off modes, as well as high, medium, and low fan speeds. Additionally, the adapter supports 2H/2C settings and auto recover after power failure.

Features:

• Can use your favorite thermostat
• Cool, heat, fan only, and off modes
• High, medium, and low fan speeds
• 2H/2C
• Auto recover after power failure
• Single zone compatible
• Multi zone compatible

Compatible Indoor Units:

Wall Mounted

• GL Series: MSZ-GL06NA-U1, MSZ-GL09NA-U1, MSZ-GL12NA-U1, MSZ-GL15NA-U1, MSZ-GL18NA-U1, MSZ-GL24NA-U1, MSY-GL09NA-U1, MSY-GL12NA-U1, MSY-GL15NA-U1, MSY-GL18NA-U1, MSY-GL24NA-U1
• FH Series: MSZ-FH06NA, MSZ-FH09NA, MSZ-FH12NA, MSZ-FH15NA, MSZ-FH18NA2
• EF Series: MSZ-EF09NAB-U1, MSZ-EF09NAS-U1, MSZ-EF09NAW-U1, MSZ-EF12NAB-U1, MSZ-EF12NAS-U1, MSZ-EF12NAW-U1, MSZ-EF15NAB-U1, MSZ-EF15NAS-U1, MSZ-EF15NAW-U1, MSZ-EF18NAB-U1, MSZ-EF18NAS-U1, MSZ-EF18NAW-U1
• P Series: PKA-A12HA7, PKA-A18HA7,PKA-A24KA7, PKA-A30KA7, PKA-A36KA7

Ducted

• KD Series: SEZ-KD09NA4R1.TH, SEZ-KD12NA4R1.TH, SEZ-KD15NA4R1.TH, SEZ-KD18NA4R1.TH
• P Series: PEAD-A09AA7, PEAD-A12AA7, PEAD-A15AA7, PEAD-A18AA7, PEAD-A24AA7, PEAD-A30AA7, PEAD-A36AA7, PEAD-A42AA7

Ceiling Cassette

• KF Series: SLZ-KF09NA, SLZ-KF12NA, SLZ-KF15NA, SLZ-KF18NA
• KP Series: MLZ-KP09NA, MLZ-KP12NA, MLZ-KP18NA
• P Series: PLA-A12EA7, PLA-A18EA7, PLA-A24EA7, PLA-A30EA7, PLA-A36EA7, PLA-A42EA7

Floor Mounted

• MFZ-KJ09NA-U1, MFZ-KJ12NA-U1, MFZ-KJ15NA-U1, MFZ-KJ18NA-U1

Multi Position Air Handler

• KP: SVZ-KP12NA, SVZ-KP18NA, SVZ-KP24NA, SVZ-KP30NA, SVZ-KP36NA
• P Series: PVA-A12AA7, PVA-A18AA7, PVA-A24AA7, PVA-A30AA7, PVA-A36AA7, PVA-A42AA7

Ceiling Suspended

• P Series: PCA-A24KA7, PCA-A30KA7, PCA-A36KA7, PCA-A42KA7

The Mitsubishi PAR-40MAAU is the fourth version of the company's most popular wired controller. It is specifically designed for residential and light commercial M & P Series units. This controller has advanced features, including in-depth 7-day scheduling and a backlit display, making it easier to read and use.

Features

• Temperature Sensing: The controller can sense temperature at the indoor unit (default) or at the controller.
• Installation: The controller installs with thermostat 22-2 wire, which is not included.
• Temperature Display: It displays temperature in Fahrenheit °F or Celsius °C.
• Battery-free: The controller does not require any batteries to function.
• Compatibility: It is compatible with both single and multi-zone units.
• Languages: The controller offers language options in English, French, and Spanish.

Compatible Indoor Units:

Wall Mounted

• GL Series: MSZ-GL06NA-U1*, MSZ-GL09NA-U1*, MSZ-GL12NA-U1*, MSZ-GL15NA-U1*, MSZ-GL18NA-U1*, MSZ-GL24NA-U1*, MSY-GL09NA-U1*, MSY-GL12NA-U1*, MSY-GL15NA-U1*, MSY-GL18NA-U1*, MSY-GL24NA-U1*
• FH Series: MSZ-FH06NA*, MSZ-FH09NA*, MSZ-FH12NA*, MSZ-FH15NA*, MSZ-FH18NA2*
• EF Series: MSZ-EF09NAB-U1*, MSZ-EF09NAS-U1*, MSZ-EF09NAW-U1*, MSZ-EF12NAB-U1*, MSZ-EF12NAS-U1*, MSZ-EF12NAW-U1*, MSZ-EF15NAB-U1*, MSZ-EF15NAS-U1*, MSZ-EF15NAW-U1*, MSZ-EF18NAB-U1*, MSZ-EF18NAS-U1*, MSZ-EF18NAW-U1*
• D Series: MSZ-D30NA-8*, MSZ-D36NA-8*, MSY-D30NA-8*, MSY-D36NA-8*
• P Series: PKA-A12HA7, PKA-A18HA7,PKA-A24KA7, PKA-A30KA7, PKA-A36KA7

Ducted

• KD Series: SEZ-KD09NA4R1.TH, SEZ-KD12NA4R1.TH, SEZ-KD15NA4R1.TH, SEZ-KD18NA4R1.TH
• P Series: PEAD-A09AA7, PEAD-A12AA7, PEAD-A15AA7, PEAD-A18AA7, PEAD-A24AA7, PEAD-A30AA7, PEAD-A36AA7, PEAD-A42AA7

Ceiling Cassette

• KF Series: SLZ-KF09NA, SLZ-KF12NA, SLZ-KF15NA, SLZ-KF18NA
• KP Series: MLZ-KP09NA*, MLZ-KP12NA*, MLZ-KP18NA*
• P Series: PLA-A12EA7, PLA-A18EA7, PLA-A24EA7, PLA-A30EA7, PLA-A36EA7, PLA-A42EA7

Floor Mounted

• MFZ-KJ09NA-U1*, MFZ-KJ12NA-U1*, MFZ-KJ15NA-U1*, MFZ-KJ18NA-U1*

Multi Position Air Handler

• KP: SVZ-KP12NA, SVZ-KP18NA, SVZ-KP24NA, SVZ-KP30NA, SVZ-KP36NA
• P Series: PVA-A12AA7, PVA-A18AA7, PVA-A24AA7, PVA-A30AA7, PVA-A36AA7, PVA-A42AA7

Ceiling Suspended

• P Series: PCA-A24KA7, PCA-A30KA7, PCA-A36KA7, PCA-A42KA7

*Requires MAC-334IF adapter, sold separately

Mitsubishi SLP-18FAEU: A Grille Option for KF Cassette Installation

The Mitsubishi SLP-18FAEU is a high-quality grille option that is required to complete a KF cassette installation. It is specifically designed to work with the KF series of ceiling cassette indoor units, including the SLZ-KF09NA, SLZ-KF12NA, SLZ-KF15NA, and SLZ-KF18NA models.

Features of the SLP-18FAEU

• i-see Sensor technology for improved comfort and airflow
• Overlaps a 2' x 2' ceiling tile to hide indoor unit from view

Compatibility with Indoor Units

The SLP-18FAEU is compatible with the following KF series ceiling cassette indoor units:

• SLZ-KF09NA
• SLZ-KF12NA
• SLZ-KF15NA
• SLZ-KF18NA

Conclusion

If you're looking for a reliable and high-quality grille option to complete your KF cassette installation, the Mitsubishi SLP-18FAEU is an excellent choice. With its advanced features, including i-see Sensor technology, and compatibility with the KF series of ceiling cassette indoor units, this grille option ensures optimal performance and energy efficiency for your system.

The Mitsubishi SLP-18FAU is a grille option designed for use with the KF series cassettes to provide a sleek and seamless appearance. This standard grille option is an essential component for completing the installation of the cassette unit.

Features:

• Overlaps a 2' x 2' ceiling tile to hide indoor unit from view.

Compatible Indoor Units:

Ceiling Cassette

• KF Series: SLZ-KF09NA, SLZ-KF12NA, SLZ-KF15NA, SLZ-KF18NA