1-888-485-0777
Today's Hours 10am - 6pm est
In stock
Important Installation Note: To ensure proper functionality, the Mitsubishi SEZ-KD15NA4 air handler must be installed with a condenser, controller, and other necessary installation equipment which are available for purchase.
The Mitsubishi SEZ-KD15NA4 is a slim-ducted air handler that is designed to work with both single and multi-zone mini-split systems. Its compact size allows it to fit in tight spaces like crawlspaces, making it a perfect choice for spaces where standard, whole-home air handlers are too large. The SEZ-KD15NA4 can support small duct runs, including branch-offs, to cover a couple of smaller rooms. Alternatively, it can direct airflow directly into the space without ductwork. These features provide enhanced comfort in a convenient form factor for your home.
The Mitsubishi MXZ-5C42NA2-U1 is a multi zone heat pump condenser designed for use in applications where multiple air handlers are required. Compared to using multiple single zone condensers, the MXZ-5C42NA2-U1 is a more practical solution, as it takes up less space in your yard.
The Mitsubishi MXZ-5C42NA2-U1 is rated at 42,000 BTU, which should be equal to or greater than the total BTU count across all air handlers paired with it. Using a certified pairing with a higher BTU count total can potentially lower the speed that the unit can heat and cool, as well as limit the functional outputs of each air handler if they are all running at the same time.
Please note: This heat pump condenser requires compatible air handlers, controllers, and other installation equipment, available at an additional cost.
Mitsubishi offers a 5-year parts and 7-year compressor warranty on all its products. Registering the unit online after installation following your state and local codes upgrades the warranty to a 10-year parts and compressor warranty.
The MXZ-5C42NA2-U1's variable speed compressor allows for more precise adjustments to the covered spaces with the right air handlers. This improves electrical efficiency by ramping the compressor up and down based on the unit's air handlers' needs, as well as providing a more stable temperature output from the connected air handlers to provide superior comfort down to -4°F.
Many air handlers compatible with the MXZ-5C42NA2-U1 can use any Mitsubishi-brand thermostat or adapter for ease of control. The most convenient to control, the Kumo cloud WiFi adapter, allows each air handler to be accessed from anywhere with an internet connection. Please note that you will need one thermostat or adapter per indoor air handler you want to control with it.
Note: To operate, this air handler must be installed with a condenser, controller, and other installation equipment, which are available for purchase separately.
The Mitsubishi SEZ-KD09NA4 is an ideal solution for applications where a standard, whole-home air handler is too large. This slim-ducted air handler can fit into tight locations, such as crawlspaces, and supports both small duct runs or can direct airflow directly into a space with no ductwork. Designed for enhanced comfort and convenience, the SEZ-KD09NA4 is compatible with both single and multi zone mini split equipment, making it a versatile option for any space.
The Mitsubishi MHK2 is the second revision of Mitsubishi's popular wireless controller set designed for use with M & P Series residential and light commercial units. This controller provides comprehensive 7-day scheduling and a clear, backlit display for easy use.
With the updated MHK2, you can now use the Kumo Cloud wi-fi adapter (sold separately) alongside the wireless controller. You no longer have to choose between internet and wireless control--you can have both!
The MRCH2 is the main body of the thermostat, which can be placed up to 200 feet away from the indoor unit without requiring line of sight. The MRC2 cable connects to the CN105 connector on the indoor unit's control board, and the other end of the cable connects to the MIFH2 receiver. The MIFH2 receiver can be placed on the right side of a wall-mounted unit, in the pocket of an MLZ-KP cassette, or anywhere near the control side of a ducted or square cassette unit.
Compatible Indoor Units:
Wall Mounted
Ducted
Ceiling Cassette
Floor Mounted
Multi Position Air Handler
Ceiling Suspended
15,000 BTU Mitsubishi Multi-Zone Concealed Duct Air Handler | |
---|---|
SKU | SEZ-KD15NA4R1 |
Weight (in lbs) | 55.000000 |
Brand/Manufacturer | Mitsubishi |
Cooling BTU | 14,100 |
Heating BTU | 18,000 |
Refrigerant | R410A |
Liquid Line | 1/4" |
Suction Line | 1/2" |
Electrical | 208/230 V. 1 Phase 60 Hz |
BTU/Tonnage | 15,000 BTU/1.25 Ton |
Mini-Split Type | Concealed Duct |
Height | 27 9/16" |
Width | 39" |
Depth | 7 7/8" |
Warranty | 5 Years Parts Warranty |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
42,000 BTU Ductless Mitsubishi Mini-Split Multi Zone MXZ-C Series - Heat Pump Condenser | |
SKU | MXZ-5C42NA3 |
Refrigerant Charge | Pre-Charged For: 98' |
Weight (in lbs) | 189.000000 |
AHRI Certificate Number | 201754913, 201754914, 201755021 |
Brand/Manufacturer | Mitsubishi |
Additional Information | Heat Pump |
Additional Information | Maximum Line Set Length: 82' |
Additional Information | Maximum System Line Length: 262' |
HSPF | 10.3 |
Cooling BTU | 40,500 |
Heating BTU | 45,000 |
Decibel Level (dBA) | 56-58 |
Energy Star | No |
Refrigerant | R410A |
SEER1 (Efficiency) | 18-20 |
EER | 9.2 |
Liquid Line | 1/4" (5) |
Suction Line | 1/2" (1), 3/8" (4) |
Electrical | 208/230V 1 Phase 60 Hz |
Phase | Single Phase |
Max Breaker Size | 40 |
Min. Breaker Size | 32.5 |
Tonnage | 3.5 Ton |
BTU/Tonnage | 42,000 BTU/3.5 Ton |
Min/Max Outdoor Temp for Heating | 5°-65° |
Min/Max Outdoor Temp for Cooling | 14°-115° |
Zone Compatibility | Multi Zone |
Operating Mode | Cooling, Heating |
Height | 41-9/32" |
Width | 37-13/32" |
Depth | 13" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
9,000 BTU Mitsubishi Multi-Zone Concealed Duct Air Handler | |
SKU | SEZ-KD09NA4R1 |
Weight (in lbs) | 45.000000 |
Brand/Manufacturer | Mitsubishi |
Cooling BTU | 8,100 |
Heating BTU | 10,900 |
Refrigerant | R410A |
Liquid Line | 1/4" |
Suction Line | 3/8" |
Electrical | 208/230 V. 1 Phase 60 Hz |
BTU/Tonnage | 9,000 BTU/0.75 Ton |
Mini-Split Type | Concealed Duct |
Height | 27 9/16" |
Width | 31 1/8" |
Depth | 7 7/8" |
Warranty | 5 Years Parts Warranty |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
Mitsubishi MHK2 Wireless Remote Controller | |
SKU | MHK2 |
Weight (in lbs) | 2.000000 |
Brand/Manufacturer | Mitsubishi |
Length | Cable:39-23/64" |
Height | Thermostat: 4-5/64” | Receiver: 3-3/32” |
Width | Thermostat: 4-5/64” | Receiver: 1-3/4” |
Depth | Thermostat: 1-1/16" | Receiver: 39/64” |
Warranty | 5 Years Parts Warranty |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |