42,000 BTU 19 SEER Mitsubishi Quad Zone Mini Split H2i Hyper Heat Pump System 6+6+12+12 - Wall Mounted

Mitsubishi MSZ-FS12NA Air Handler

If you're looking for a reliable and efficient air handler to cool a small room, the Mitsubishi MSZ-FS12NA might be the perfect solution. This 12,000 BTU wall-mounted air handler comes with a remote and a built-in I-SEE sensor, which directs airflow more effectively and maintains a constant temperature in the room. It also boasts a .375 gallon per hour dehumidification rate.

Note: To ensure proper functionality, this air handler must be installed with a condenser and other installation equipment, which are available at an additional cost.

Multi-Zone Capability

The Mitsubishi MSZ-FS12NA air handler can function as a single zone system or be integrated into a multi-zone setup. This flexibility makes it a versatile option for both residential and commercial applications.

I-SEE Sensor Technology

The built-in I-SEE sensor constantly reads the temperature from multiple directions in the room, allowing the air handler to aim airflow where it is needed most. This results in a more even temperature distribution and reduced unit run time, which can save you money on energy bills.

Enhanced Filtration System

Mitsubishi cares about your health, which is why they factory-installed an enhanced filtration system in the MSZ-FS12NA air handler. This system helps remove dust, allergens, and other airborne particles, creating a cleaner and healthier indoor environment.

Product Review: Mitsubishi MXZ-SM42NAMHZ-U1 Heat Pump Condenser

Overview

The Mitsubishi MXZ-SM42NAMHZ-U1 is a multi-zone heat pump condenser designed to provide efficient heating and cooling solutions for your home. This unit is perfect for applications where space is limited, as it eliminates the need for multiple single-zone condensers. It comes with an integrated drain pan heater that allows it to function even in extremely cold temperatures, making it ideal for areas with harsh winters.

Features

The MXZ-SM42NAMHZ-U1 is a 42,000 BTU multi-zone heat pump condenser that uses variable speed inverter-driven compressors with quiet operation features. It requires a branch box for optimal functionality and comes equipped with hyper heat technology that supports enhanced comfort even in temperatures as low as -13°F.

• 42,000 BTU multi-zone heat pump condenser
• Variable speed inverter-driven compressor with quiet operation features
• Requires a branch box
• Hyper Heat technology, supporting enhanced comfort down to -13°F

42,000 BTU

The Mitsubishi MXZ-SM42NAMHZ-U1 is capable of handling a total of 42,000 BTU, which is typically the same or greater than the total BTU count across all air handlers paired with this unit. Certified pairings may have a higher BTU count total than this condenser's rating, but exceeding the rating can potentially lower the speed at which the unit heats and cools, and limit the functional outputs of each air handler when running simultaneously.

Warranty

Mitsubishi provides a 5-year parts and 7-year compressor warranty on all their products. By registering the unit online following state and local installation codes, the warranty is upgraded to a 10-year parts and compressor warranty.

Required Equipment

The MXZ-SM42NAMHZ-U1 is designed with one set of line set ports, allowing it to support a higher BTU output than units with multiple sets. Therefore, at least one branch box is required for it to connect to multiple air handlers. Basic installation equipment such as air handlers, controllers, and other accessories are available at an additional cost.

Enhanced Comfort

The MXZ-SM42NAMHZ-U1 comes with a variable speed compressor that provides more precise adjustments to covered spaces with compatible air handlers. This feature improves electrical efficiency by ramping the compressor up and down based on the needs of the unit's air handlers. It also provides a more stable temperature output from connected air handlers, delivering superior comfort.

Intelligent Control

Compatible air handlers can be controlled using any Mitsubishi-brand thermostat or adapter. The Kumo cloud WiFi adapter is the most convenient option, allowing access to each air handler from anywhere with an Internet connection. However, one thermostat or adapter is required per indoor air handler for most applications.

The Mitsubishi MSZ-FS06NA air handler is an efficient heating and cooling solution designed for small rooms. Please note that installation requires additional equipment, including a condenser, which is available at an additional cost.

Features:

• 6,000 BTU cooling capacity
• Built-in I-SEE sensor for improved airflow direction
• .225 gallon per hour dehumidification rate
• Enhanced filtration system for improved air quality
• Compatible with single zone and multi-zone systems
• Includes remote control for convenient operation

The I-SEE sensor technology in the MSZ-FS06NA air handler allows for improved temperature control by reading the temperature from multiple directions and directing airflow where it is needed most. This reduces the unit's runtime and helps to maintain a constant temperature. Additionally, the unit has a high dehumidification rate, making it an ideal solution for humid climates. With an enhanced filtration system, the air handler can help improve the air quality in the room.