1-888-485-0777
Today's Hours 10am - 6pm est
Â
In stock
If you're looking for an efficient way to cool a medium-sized room, the Mitsubishi MSZ-FS15NA air handler is an excellent choice. This wall-mounted unit comes with a remote for convenient temperature control and offers several features to ensure optimal comfort.
Before purchasing this air handler, it's important to note that it must be installed with a condenser and other equipment, which are available at an additional cost.
With its 15,000 BTU capacity and .405 gallon per hour dehumidification rate, this air handler is designed to provide efficient cooling for medium-sized rooms. Its built-in I-SEE sensor technology constantly reads the temperature from multiple directions in the room, directing airflow to where it's needed most. This results in a more constant temperature and decreased run time for the unit.
In addition to its cooling capabilities, the Mitsubishi MSZ-FS15NA air handler also comes with a factory-installed enhanced filtration system. This system helps to remove pollutants and allergens from the air, promoting a healthier environment for you and your family.
This air handler is designed to function as a single zone system or as part of a multi zone system setup, providing versatility for your cooling needs.
Overall, the Mitsubishi MSZ-FS15NA air handler offers efficient and effective cooling for medium-sized rooms, with several features to ensure optimal comfort and health. Just remember to purchase the necessary installation equipment, available at an additional cost, for proper setup.
The Mitsubishi MXZ-5C42NA2-U1 is a multi zone heat pump condenser designed for use in applications where multiple air handlers are required. Compared to using multiple single zone condensers, the MXZ-5C42NA2-U1 is a more practical solution, as it takes up less space in your yard.
The Mitsubishi MXZ-5C42NA2-U1 is rated at 42,000 BTU, which should be equal to or greater than the total BTU count across all air handlers paired with it. Using a certified pairing with a higher BTU count total can potentially lower the speed that the unit can heat and cool, as well as limit the functional outputs of each air handler if they are all running at the same time.
Please note: This heat pump condenser requires compatible air handlers, controllers, and other installation equipment, available at an additional cost.
Mitsubishi offers a 5-year parts and 7-year compressor warranty on all its products. Registering the unit online after installation following your state and local codes upgrades the warranty to a 10-year parts and compressor warranty.
The MXZ-5C42NA2-U1's variable speed compressor allows for more precise adjustments to the covered spaces with the right air handlers. This improves electrical efficiency by ramping the compressor up and down based on the unit's air handlers' needs, as well as providing a more stable temperature output from the connected air handlers to provide superior comfort down to -4°F.
Many air handlers compatible with the MXZ-5C42NA2-U1 can use any Mitsubishi-brand thermostat or adapter for ease of control. The most convenient to control, the Kumo cloud WiFi adapter, allows each air handler to be accessed from anywhere with an internet connection. Please note that you will need one thermostat or adapter per indoor air handler you want to control with it.
The Mitsubishi MSZ-FS06NA air handler is an efficient heating and cooling solution designed for small rooms. Please note that installation requires additional equipment, including a condenser, which is available at an additional cost.
The I-SEE sensor technology in the MSZ-FS06NA air handler allows for improved temperature control by reading the temperature from multiple directions and directing airflow where it is needed most. This reduces the unit's runtime and helps to maintain a constant temperature. Additionally, the unit has a high dehumidification rate, making it an ideal solution for humid climates. With an enhanced filtration system, the air handler can help improve the air quality in the room.
The Mitsubishi MSZ-FS09NA air handler is an efficient heating and cooling solution designed for small rooms. Please note that installation requires additional equipment, including a condenser, which is available at an additional cost.
The I-SEE sensor technology in the MSZ-FS09NA air handler allows for improved temperature control by reading the temperature from multiple directions and directing airflow where it is needed most. This reduces the unit's runtime and helps to maintain a constant temperature. Additionally, the unit has a high dehumidification rate, making it an ideal solution for humid climates. With an enhanced filtration system, the air handler can help improve the air quality in the room.
15,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FS Series - Air Handler | |
---|---|
SKU | MSZ-FS15NA |
Weight (in lbs) | 29.000000 |
Brand/Manufacturer | Mitsubishi |
Controller | Wireless Included |
Additional Information | Drain: 5/8" |
Cooling BTU | 15,000 |
Heating BTU | 18,000 |
Maximum CFM | 194-497 CFM |
Decibel Level (dBA) | 25-46 |
Refrigerant | R410A |
Capacity | Dehumidification Rate: 0.41 gal/hr |
Liquid Line | 1/4" |
Suction Line | 1/2" |
Electrical | 208/230V 1 Phase 60 Hz |
Phase | Single Phase |
BTU/Tonnage | 15,000 BTU/1.25 Ton |
Mini-Split Type | Wall Mounted |
Zone Compatibility | Multi Zone |
Operating Mode | Cooling, Heating |
Height | 12-11/16" |
Width | 36-7/16" |
Depth | 9-3/16" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
42,000 BTU Ductless Mitsubishi Mini-Split Multi Zone MXZ-C Series - Heat Pump Condenser | |
SKU | MXZ-5C42NA3 |
Refrigerant Charge | Pre-Charged For: 98' |
Weight (in lbs) | 189.000000 |
AHRI Certificate Number | 201754913, 201754914, 201755021 |
Brand/Manufacturer | Mitsubishi |
Additional Information | Heat Pump |
Additional Information | Maximum Line Set Length: 82' |
Additional Information | Maximum System Line Length: 262' |
HSPF | 10.3 |
Cooling BTU | 40,500 |
Heating BTU | 45,000 |
Decibel Level (dBA) | 56-58 |
Energy Star | No |
Refrigerant | R410A |
SEER1 (Efficiency) | 18-20 |
EER | 9.2 |
Liquid Line | 1/4" (5) |
Suction Line | 1/2" (1), 3/8" (4) |
Electrical | 208/230V 1 Phase 60 Hz |
Phase | Single Phase |
Max Breaker Size | 40 |
Min. Breaker Size | 32.5 |
Tonnage | 3.5 Ton |
BTU/Tonnage | 42,000 BTU/3.5 Ton |
Min/Max Outdoor Temp for Heating | 5°-65° |
Min/Max Outdoor Temp for Cooling | 14°-115° |
Zone Compatibility | Multi Zone |
Operating Mode | Cooling, Heating |
Height | 41-9/32" |
Width | 37-13/32" |
Depth | 13" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
6,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FS Series - Air Handler | |
SKU | MSZ-FS06NA |
Weight (in lbs) | 29.000000 |
Brand/Manufacturer | Mitsubishi |
Controller | Wireless Included |
Additional Information | Drain: 5/8" |
Cooling BTU | 6,000 |
Heating BTU | 8,700 |
Maximum CFM | 117-437 CFM |
Decibel Level (dBA) | 20-42 |
Refrigerant | R410A |
Capacity | Dehumidification Rate: 0.23 gal/hr |
Liquid Line | 1/4" |
Suction Line | 3/8" |
Electrical | 208/230V 1 Phase 60 Hz |
Phase | Single Phase |
BTU/Tonnage | 6,000 BTU/0.5 Ton |
Mini-Split Type | Wall Mounted |
Zone Compatibility | Multi Zone |
Operating Mode | Cooling, Heating |
Height | 12-11/16" |
Width | 36-7/16" |
Depth | 9-13/16" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
9,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FS Series - Air Handler | |
SKU | MSZ-FS09NA |
Weight (in lbs) | 29.000000 |
Brand/Manufacturer | Mitsubishi |
Controller | Wireless Included |
Additional Information | Drain: 5/8" |
Cooling BTU | 9,000 |
Heating BTU | 10,900 |
Maximum CFM | 117-381 CFM |
Decibel Level (dBA) | 20-42 |
Refrigerant | R410A |
Capacity | Dehumidification Rate: 0.23 gal/hr |
Liquid Line | 1/4" |
Suction Line | 3/8" |
Electrical | 208/230V 1 Phase 60 Hz |
BTU/Tonnage | 9,000 BTU/0.75 Ton |
Mini-Split Type | Wall Mounted |
Zone Compatibility | Multi Zone |
Operating Mode | Cooling, Heating |
Height | 12-11/16" |
Width | 36-7/16" |
Depth | 9-3/16" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |