42,000 BTU 19.7 SEER Mitsubishi Quad Zone Mini Split Heat Pump System 9+9+9+9

Mitsubishi MXZ-5C42NA2-U1 Multi Zone Heat Pump Condenser

Overview

The Mitsubishi MXZ-5C42NA2-U1 is a multi zone heat pump condenser designed for use in applications where multiple air handlers are required. Compared to using multiple single zone condensers, the MXZ-5C42NA2-U1 is a more practical solution, as it takes up less space in your yard.

Features

• 42,000 BTU multi zone heat pump condenser
• Variable speed inverter-driven compressor
• Quiet operation
• Supports enhanced comfort down to -4°F

42,000 BTU

The Mitsubishi MXZ-5C42NA2-U1 is rated at 42,000 BTU, which should be equal to or greater than the total BTU count across all air handlers paired with it. Using a certified pairing with a higher BTU count total can potentially lower the speed that the unit can heat and cool, as well as limit the functional outputs of each air handler if they are all running at the same time.

Please note: This heat pump condenser requires compatible air handlers, controllers, and other installation equipment, available at an additional cost.

Warranty

Mitsubishi offers a 5-year parts and 7-year compressor warranty on all its products. Registering the unit online after installation following your state and local codes upgrades the warranty to a 10-year parts and compressor warranty.

Enhanced Comfort

The MXZ-5C42NA2-U1's variable speed compressor allows for more precise adjustments to the covered spaces with the right air handlers. This improves electrical efficiency by ramping the compressor up and down based on the unit's air handlers' needs, as well as providing a more stable temperature output from the connected air handlers to provide superior comfort down to -4°F.

Many air handlers compatible with the MXZ-5C42NA2-U1 can use any Mitsubishi-brand thermostat or adapter for ease of control. The most convenient to control, the Kumo cloud WiFi adapter, allows each air handler to be accessed from anywhere with an internet connection. Please note that you will need one thermostat or adapter per indoor air handler you want to control with it.

Mitsubishi MLZ-KP09NA Ceiling Cassette Air Handler

Overview

The Mitsubishi MLZ-KP09NA ceiling cassette air handler is designed to provide superior heating and cooling for small rooms when paired with a compatible condenser. With enhanced operation features, it lives up to Mitsubishi's industry-leading comfort standards.

Quick Facts

• 9,000 BTU capacity
• Suitable for small rooms in average climates
• Quiet operation
• Dry mode setting

At 9,000 BTU, the MLZ-KP09NA air handler is suitable for small rooms in ideal climates. Please note that a compatible condenser is required for this air handler to function.

Installation and Maintenance

The MLZ-KP09NA air handler has a small form factor, allowing it to fit between standard 16" joists, with a depth of only 7-1/2", making it suitable for almost any room. As a ceiling cassette, it can be installed in locations where wall or floor mounted units are not practical or desired. Please note that a ceiling cassette grill is required for all installations, which is available at an additional cost.

Intelligent Comfort

The Mitsubishi MLZ-KP09NA offers quiet operation and intelligent comfort. With multiple operating modes and fan speeds, it can adjust the temperature more precisely to keep you comfortable.

Compatible Condensers

The MLZ-KP09NA air handler is compatible with the following condensers:

• Single Zone: SUZ-KA09NA2, SUZ-KA09NAHZ
• Multi Zone: MXZ-2C20NA2, MXZ-3C24NA2, MXZ-3C30NA2, MXZ-4C36NA2, MXZ-5C42NA2, MXZ-8C48NA, MXZ-8C60NA, MXZ-2C20NAHZ2, MXZ-3C24NAHZ2, MXZ-3C30NAHZ2, MXZ-4C36NAHZ, MXZ-5C42NAHZ, MXZ-8C48NAHZ

Note: To function, the MLZ-KP09NA air handler must be installed with a condenser, controller,

The Mitsubishi MLP-444W grille is an essential component needed to complete a KP cassette installation. The grille is designed to fit the cassette unit perfectly and provide optimal air distribution throughout the room. It is made from high-quality materials and built to last, ensuring that the unit operates efficiently and effectively.

Features:

• Allows for direct service of unit from below.
• Overlaps a 1.5' x 4' area to hide the ceiling cassette body in a drop ceiling or recessed between 16" on center joists.

Compatible Indoor Units:

Ceiling Cassette

• KP Series: MLZ-KP09NA, MLZ-KP12NA, MLZ-KP18NA