48,000 BTU 18.9 SEER Mitsubishi Five Zone Mini Split H2i Hyper Heat Pump System 9+9+9+12+18 - Ceiling Cassette

Mitsubishi MLZ-KP12NA Ceiling Cassette Air Handler

The Mitsubishi MLZ-KP12NA is a ceiling cassette air handler that provides superior heating and cooling to your medium-sized room when paired with a compatible condenser. With its enhanced operation features, it lives up to Mitsubishi's industry-leading comfort standards, ensuring that you stay comfortable all year round.

Quick Facts

• Designed to heat and cool a medium-sized room (in an average climate)
• 12,000 BTU
• Quiet operation
• Dry mode setting

Specifications

The Mitsubishi MLZ-KP12NA air handler has a cooling capacity of 12,000 BTU and a SEER rating of 17-20. Please note that a compatible condenser is required for the air handler to function properly.

Installation and Maintenance

The MLZ-KP12NA air handler has a small form factor and can easily fit between standard 16" joists, with a depth of only 7-1/2". This ceiling cassette unit can be installed in locations where wall or floor mounted units are not practical or desired. A ceiling cassette grill is required for all installations and is available at an additional cost. To ensure proper functioning, it is recommended to install the air handler with a condenser, controller, and other installation equipment, all of which are available for purchase.

Intelligent Comfort

The Mitsubishi MLZ-KP12NA air handler is designed to provide quiet operation and enhanced comfort. With its multiple operating modes and multiple fan speeds, the air handler will heat and cool your room with ease and adjust the temperature more precisely to keep you comfortable.

Compatible Condensers

The Mitsubishi MLZ-KP12NA air handler is compatible with the following condensers:

• Single Zone: SUZ-KA12NA2, SUZ-KA12NAHZ
• Multi Zone: MXZ-2C20NA2, MXZ-3C24NA2, MXZ-3C30NA2, MXZ-4C36NA2, MXZ-5C42NA2, MXZ-8C48NA, MXZ-8C60NA, MXZ-2C20NAHZ2, MXZ-3C24NAHZ2, MXZ-3C30NAHZ2, MXZ-4C36NAHZ, MXZ-5C42NAHZ, MXZ-8C48NAHZ

Please note that the installation of the air handler with a compatible condenser, controller, and other installation equipment is required for proper functioning.

Mitsubishi MLZ-KP18NA Ceiling Cassette Air Handler

Overview

The Mitsubishi MLZ-KP18NA ceiling cassette air handler is a high-performance heating and cooling unit designed to provide superior comfort to your medium-sized room. This air handler can achieve Mitsubishi's industry-leading comfort standards when paired with a compatible condenser.

Quick Facts

• 18,000 BTU capacity
• Designed to heat and cool a medium room in an average climate
• Dry mode setting to reduce humidity
• Quiet operation

Features and Benefits

18,000 BTU, 17-20 SEER

With a capacity of 18,000 BTU, the Mitsubishi MLZ-KP18NA air handler can effectively heat and cool a medium-sized room in an ideal climate. Please note that a compatible condenser is required for this air handler to function.

Installation and Maintenance

The MLZ-KP18NA air handler has a compact design that fits easily between standard 16" joists, and its shallow depth of 7-1/2" makes it suitable for almost any room. As a ceiling cassette, this unit can be installed in locations where wall or floor mounted units are not practical or desired. Please note that a ceiling cassette grill is required for all installations, which is available for purchase separately.

Intelligent Comfort

The Mitsubishi MLZ-KP18NA offers quiet operation and enhanced comfort with its multiple operating modes and fan speeds. This air handler can heat and cool your room with ease and precision to keep you comfortable all year round.

Compatible Condensers

• Single Zone: SUZ-KA18NA2, SUZ-KA18NAHZ
• Multi Zone: MXZ-3C24NA2, MXZ-3C30NA2, MXZ-4C36NA2, MXZ-5C42NA2, MXZ-8C48NA, MXZ-8C60NA, MXZ-3C24NAHZ2, MXZ-3C30NAHZ2, MXZ-4C36NAHZ, MXZ-5C42NAHZ, MXZ-8C48NAHZ

Please note that the Mitsubishi MLZ-KP18NA air handler requires a compatible condenser, controller, and other installation equipment to function, which are all available for purchase separately.

Mitsubishi MXZ-SM48NAMHZ-U1: Overview, Features, Warranty, and Required Equipment

Overview

The Mitsubishi MXZ-SM48NAMHZ-U1 is a heat pump condenser designed for use in multi-zone systems. Compared to using multiple single-zone condensers, a multi-zone unit is more practical in many applications since it takes up less space. With its integrated drain pan heater, the MXZ-SM48NAMHZ-U1 can heat down to -13°F, ensuring warmth even during the coldest months.

Features

• 48,000 BTU multi-zone heat pump condenser
• Variable speed inverter-driven compressor with quiet operation features
• Requires a branch box
• Hyper Heat technology for enhanced comfort down to -13°F

48,000 BTU

The MXZ-SM48NAMHZ-U1 is rated to handle a total of 48,000 BTU, which should be the same or greater than the total BTU count across all air handlers paired with it. In some cases, a certified pairing may have a higher BTU count total than the condenser's rating. However, anything higher than this rating can potentially lower the speed at which the unit can heat and cool, as well as limit the functional outputs of each air handler if they are all running at the same time.

Warranty

Mitsubishi offers a 5-year parts and 7-year compressor warranty on all its products. If the unit is registered online through the manufacturer after installation following state and local codes, the warranty is upgraded to a 10-year parts and compressor warranty.

Required Equipment

The MXZ-SM48NAMHZ-U1 is designed with only one set of line set ports, which allows it to support a higher BTU output than units with multiple sets. Therefore, at least one branch box is required for this unit to function, allowing it to connect to multiple air handlers. The condenser also requires air handlers, controllers, and other basic installation equipment to function, all of which are available at an additional cost.

With its variable speed compressor, the MXZ-SM48NAMHZ-U1 can provide more precise adjustments to the covered spaces with the right air handlers. This also slightly improves electrical efficiency by ramping the compressor up and down based on the unit's air handlers' needs, as well as providing a more stable temperature output from the connected air handlers to provide superior comfort.

For ease of control, many air handlers compatible with the MXZ-SM48NAMHZ-U1 can use any Mitsubishi-brand thermostat or adapter. The most convenient way to control the unit is through the Kumo cloud WiFi adapter, which allows each air handler to be accessed from anywhere with an internet connection. However, in most applications, you will need one thermostat or adapter per indoor air handler that you want to be able to control with it.

Mitsubishi MLZ-KP09NA Ceiling Cassette Air Handler

Overview

The Mitsubishi MLZ-KP09NA ceiling cassette air handler is designed to provide superior heating and cooling for small rooms when paired with a compatible condenser. With enhanced operation features, it lives up to Mitsubishi's industry-leading comfort standards.

Quick Facts

• 9,000 BTU capacity
• Suitable for small rooms in average climates
• Quiet operation
• Dry mode setting

At 9,000 BTU, the MLZ-KP09NA air handler is suitable for small rooms in ideal climates. Please note that a compatible condenser is required for this air handler to function.

Installation and Maintenance

The MLZ-KP09NA air handler has a small form factor, allowing it to fit between standard 16" joists, with a depth of only 7-1/2", making it suitable for almost any room. As a ceiling cassette, it can be installed in locations where wall or floor mounted units are not practical or desired. Please note that a ceiling cassette grill is required for all installations, which is available at an additional cost.

Intelligent Comfort

The Mitsubishi MLZ-KP09NA offers quiet operation and intelligent comfort. With multiple operating modes and fan speeds, it can adjust the temperature more precisely to keep you comfortable.

Compatible Condensers

The MLZ-KP09NA air handler is compatible with the following condensers:

• Single Zone: SUZ-KA09NA2, SUZ-KA09NAHZ
• Multi Zone: MXZ-2C20NA2, MXZ-3C24NA2, MXZ-3C30NA2, MXZ-4C36NA2, MXZ-5C42NA2, MXZ-8C48NA, MXZ-8C60NA, MXZ-2C20NAHZ2, MXZ-3C24NAHZ2, MXZ-3C30NAHZ2, MXZ-4C36NAHZ, MXZ-5C42NAHZ, MXZ-8C48NAHZ

Note: To function, the MLZ-KP09NA air handler must be installed with a condenser, controller,

The Mitsubishi MLP-444W grille is an essential component needed to complete a KP cassette installation. The grille is designed to fit the cassette unit perfectly and provide optimal air distribution throughout the room. It is made from high-quality materials and built to last, ensuring that the unit operates efficiently and effectively.

Features:

• Allows for direct service of unit from below.
• Overlaps a 1.5' x 4' area to hide the ceiling cassette body in a drop ceiling or recessed between 16" on center joists.

Compatible Indoor Units:

Ceiling Cassette

• KP Series: MLZ-KP09NA, MLZ-KP12NA, MLZ-KP18NA