36,000 BTU 19.1 SEER Mitsubishi Quad Zone Mini Split H2i Hyper Heat Pump System 6+6+6+9-R410A

The Mitsubishi MSZ-GL06NA air handler is an efficient heating and cooling solution designed for small rooms. Please note that installation requires additional equipment, including a condenser, which is available at an additional cost.

Features:

• 6,000 BTU cooling capacity
• Built-in I-SEE sensor for improved airflow direction
• .225 gallon per hour dehumidification rate
• Enhanced filtration system for improved air quality
• Compatible with single zone and multi-zone systems
• Includes remote control for convenient operation

The I-SEE sensor technology in the MSZ-GL06NA air handler allows for improved temperature control by reading the temperature from multiple directions and directing airflow where it is needed most. This reduces the unit's runtime and helps to maintain a constant temperature. Additionally, the unit has a high dehumidification rate, making it an ideal solution for humid climates. With an enhanced filtration system, the air handler can help improve the air quality in the room.

Mitsubishi MXZ-SM36NAMHZ-U1: Multi-Zone Heat Pump Condenser

Overview

The Mitsubishi MXZ-SM36NAMHZ-U1 is a multi-zone heat pump condenser that is ideal for setups where multiple air handlers are needed to heat and cool different rooms. This unit has an integrated drain pan heater and can operate in temperatures as low as -13°F, making it suitable for use in cold climates.

Features

36,000 BTU Multi-Zone Heat Pump Condenser

The MXZ-SM36NAMHZ-U1 is a powerful heat pump condenser with a 36,000 BTU rating. This means that it can handle a total BTU count equal to or greater than the total BTU count of all the air handlers it is paired with. Certified pairings may have a higher BTU count, but exceeding the unit's rating can impact its efficiency.

Variable Speed Inverter-Driven Compressor

The unit's variable speed compressor provides quiet operation and precise temperature control. It ramps up and down based on the air handlers' needs, which improves its electrical efficiency and provides enhanced comfort.

Hyper Heat Technology

The MXZ-SM36NAMHZ-U1 is equipped with Hyper Heat technology, which supports enhanced comfort even in temperatures as low as -13°F.

Requires a Branch Box

To function properly, this unit requires at least one branch box, which enables it to connect to multiple air handlers.

Warranty

Mitsubishi offers a 5-year parts and 7-year compressor warranty on all its products. Registering the unit online after installation and complying with state and local codes upgrades the warranty to a 10-year parts and compressor warranty.

Required Equipment

Branch Box

As the unit has only one set of line set ports, it requires a branch box to connect to multiple air handlers. This unit also requires air handlers, controllers, and other installation equipment, which are available at an additional cost.

Enhanced Comfort and Intelligent Control

Enhanced Comfort

The unit's variable speed compressor and precise temperature control provide superior comfort. It ensures that each air handler's functional outputs remain stable even when multiple air handlers are running simultaneously.

Intelligent Control

Mitsubishi-brand thermostats or adapters can control most air handlers that are compatible with the MXZ-SM36NAMHZ-U1. The Kumo cloud WiFi adapter is the most convenient to control, providing access to each air handler from anywhere with an internet connection. Please note that one thermostat or adapter is needed per indoor air handler that needs control access.

Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends, length 30 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends, length 50 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends, length 35 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends, length 15 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

Refrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends, length 25 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.

Features:

• One pair, heavy duty refrigerant lines
• Flared line ends

The Mitsubishi MHK2 is the second revision of Mitsubishi's popular wireless controller set designed for use with M & P Series residential and light commercial units. This controller provides comprehensive 7-day scheduling and a clear, backlit display for easy use.

With the updated MHK2, you can now use the Kumo Cloud wi-fi adapter (sold separately) alongside the wireless controller. You no longer have to choose between internet and wireless control--you can have both!

Components

The MRCH2 is the main body of the thermostat, which can be placed up to 200 feet away from the indoor unit without requiring line of sight. The MRC2 cable connects to the CN105 connector on the indoor unit's control board, and the other end of the cable connects to the MIFH2 receiver. The MIFH2 receiver can be placed on the right side of a wall-mounted unit, in the pocket of an MLZ-KP cassette, or anywhere near the control side of a ducted or square cassette unit.

Features

• Includes MRCH2 thermostat, MIFH2 wireless receiver, and MRC2 cable
• Backlit display for easy viewing
• Can sense temperature at the indoor unit (default) or at the controller
• Supports both Fahrenheit and Celsius temperature scales
• No batteries required
• Compatible with both single-zone and multi-zone systems
• Offers language options in English, French, and Spanish

Compatible Indoor Units:

Wall Mounted

• GL Series: MSZ-GL06NA-U1, MSZ-GL09NA-U1, MSZ-GL12NA-U1, MSZ-GL15NA-U1, MSZ-GL18NA-U1, MSZ-GL24NA-U1, MSY-GL09NA-U1, MSY-GL12NA-U1, MSY-GL15NA-U1, MSY-GL18NA-U1, MSY-GL24NA-U1
• FH Series: MSZ-FH06NA, MSZ-FH09NA, MSZ-FH12NA, MSZ-FH15NA, MSZ-FH18NA2
• EF Series: MSZ-EF09NAB-U1, MSZ-EF09NAS-U1, MSZ-EF09NAW-U1, MSZ-EF12NAB-U1, MSZ-EF12NAS-U1, MSZ-EF12NAW-U1, MSZ-EF15NAB-U1, MSZ-EF15NAS-U1, MSZ-EF15NAW-U1, MSZ-EF18NAB-U1, MSZ-EF18NAS-U1, MSZ-EF18NAW-U1
• JP Series: MSZ-JP09WA-U1, MSZ-JP12WA-U1
• WR Series: MSZ-WR09NA-U1, MSZ-WR12NA-U1, MSZ-WR18NA-U1, MSZ-WR24NA-U1
• D Series: MSZ-D30NA-8, MSZ-D36NA-8, MSY-D30NA-8, MSY-D36NA-8
• P Series: PKA-A12HA7, PKA-A18HA7,PKA-A24KA7, PKA-A30KA7, PKA-A36KA7

Ducted

• KD Series: SEZ-KD09NA4R1.TH, SEZ-KD12NA4R1.TH, SEZ-KD15NA4R1.TH, SEZ-KD18NA4R1.TH
• P Series: PEAD-A09AA7, PEAD-A12AA7, PEAD-A15AA7, PEAD-A18AA7, PEAD-A24AA7, PEAD-A30AA7, PEAD-A36AA7, PEAD-A42AA7

Ceiling Cassette

• KF Series: SLZ-KF09NA, SLZ-KF12NA, SLZ-KF15NA, SLZ-KF18NA
• KP Series: MLZ-KP09NA, MLZ-KP12NA, MLZ-KP18NA
• P Series: PLA-A12EA7, PLA-A18EA7, PLA-A24EA7, PLA-A30EA7, PLA-A36EA7, PLA-A42EA7

Floor Mounted

• MFZ-KJ09NA-U1, MFZ-KJ12NA-U1, MFZ-KJ15NA-U1, MFZ-KJ18NA-U1

Multi Position Air Handler

• KP: SVZ-KP12NA, SVZ-KP18NA, SVZ-KP24NA, SVZ-KP30NA, SVZ-KP36NA
• P Series: PVA-A12AA7, PVA-A18AA7, PVA-A24AA7, PVA-A30AA7, PVA-A36AA7, PVA-A42AA7

Ceiling Suspended

• P Series: PCA-A24KA7, PCA-A30KA7, PCA-A36KA7, PCA-A42KA7

This wall mount bracket is perfect for outdoor mini split condensers. The length of the the wall bracket arms are 23" long. The condensing unit is mounted onto the L-shaped brackets and fastened using the bolts and anti-vibration washers provided.

• 23" Arm Length
Weight capacity of 220 lbs per arm
• Bolts and anti-vibration washers included